Draytek Vigor2130 Series User manual

Vigor2130 Series User’s Guide
ii
Vigor2130 Series
High Speed Gigabit Router
User’s Guide
Version: 2.0
Firmware Version: V1.5.1
Date: 28/07/2011

Vigor2130 Series User’s Guide iii
Copyright Information
Copyright
Declarations
Copyright 2011 All rights reserved. This publication contains information that is
protected by copyright. No part may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language without written permission from the
copyright holders.
Trademarks
The following trademarks are used in this document:
zMicrosoft is a registered trademark of Microsoft Corp.
zWindows, Windows 95, 98, Me, NT, 2000, XP, Vista and Explorer are
trademarks of Microsoft Corp.
zApple and Mac OS are registered trademarks of Apple Inc.
zOther products may be trademarks or registered trademarks of their respective
manufacturers.
Safety Instructions and Approval
Safety
Instructions
zRead the installation guide thoroughly before you set up the router.
zThe router is a complicated electronic unit that may be repaired only be
authorized and qualified personnel. Do not try to open or repair the router
yourself.
zDo not place the router in a damp or humid place, e.g. a bathroom.
zThe router should be used in a sheltered area, within a temperature range of +5 to
+40 Celsius.
zDo not expose the router to direct sunlight or other heat sources. The housing and
electronic components may be damaged by direct sunlight or heat sources.
zDo not deploy the cable for LAN connection outdoor to prevent electronic shock
hazards.
zKeep the package out of reach of children.
zWhen you want to dispose of the router, please follow local regulations on
conservation of the environment.
Warranty
We warrant to the original end user (purchaser) that the router will be free from any
defects in workmanship or materials for a period of two (2) years from the date of
purchase from the dealer. Please keep your purchase receipt in a safe place as it serves
as proof of date of purchase. During the warranty period, and upon proof of purchase,
should the product have indications of failure due to faulty workmanship and/or
materials, we will, at our discretion, repair or replace the defective products or
components, without charge for either parts or labor, to whatever extent we deem
necessary tore-store the product to proper operating condition. Any replacement will
consist of a new or re-manufactured functionally equivalent product of equal value, and
will be offered solely at our discretion. This warranty will not apply if the product is
modified, misused, tampered with, damaged by an act of God, or subjected to abnormal
working conditions. The warranty does not cover the bundled or licensed software of
other vendors. Defects which do not significantly affect the usability of the product will
not be covered by the warranty. We reserve the right to revise the manual and online
documentation and to make changes from time to time in the contents hereof without
obligation to notify any person of such revision or changes.
Be a Registered
Owner Web registration is preferred. You can register your Vigor router via
http://www.draytek.com.
Firmware & Tools
Updates Due to the continuous evolution of DrayTek technology, all routers will be regularly
upgraded. Please consult the DrayTek web site for more information on newest
firmware, tools and documents.
http://www.draytek.com

Vigor2130 Series User’s Guide
iv
European Community Declarations
Manufacturer: DrayTek Corp.
Address: No. 26, Fu Shing Road, HuKou County, HsinChu Industrial Park, Hsin-Chu, Taiwan 303
Product: Vigor2130 Series Router
DrayTek Corp. declares that Vigor2130 Series of routers are in compliance with the following essential
requirements and other relevant provisions of R&TTE Directive 1999/5/EEC.
The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive 2004/108/EC by
complying with the requirements set forth in EN55022/Class B and EN55024/Class B.
The product conforms to the requirements of Low Voltage (LVD) Directive 2006/95/EC by complying with the
requirements set forth in EN60950-1.
Regulatory Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the use is encouraged to try to correct the interference by one of the following measures:
zReorient or relocate the receiving antenna.
zIncrease the separation between the equipment and receiver.
zConnect the equipment into an outlet on a circuit different form that to which the receiver is connected.
zConsult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device may accept any interference received, including interference that may cause undesired operation.
Please visit http://www.draytek.com/user/AboutRegulatory.php
This product is designed for 2.4GHz WLAN network throughout the EC region and Switzerland with restrictions
in France. Please see the user manual for the applicable networks on your product.

Vigor2130 Series User’s Guide v
T
Ta ab bl le e o of f C Co on nt te en nt ts s
Preface.........................................................................................................1
1.1 Features.................................................................................................................................. 1
1.2 Web Configuration Buttons Explanation................................................................................. 1
1.3 LED Indicators and Connectors.............................................................................................. 2
1.3.1 For Vigor2130................................................................................................................... 2
1.3.2 For Vigor2130n................................................................................................................. 4
1.3.3 For Vigor2130Vn............................................................................................................... 6
1.4 Hardware Installation .............................................................................................................. 8
Stand Installation....................................................................................................................... 9
1.5 Printer Installation ................................................................................................................. 10
Basic Settings...........................................................................................15
2.1 Accessing Web Page............................................................................................................ 15
2.2 Changing Password.............................................................................................................. 16
2.3 Quick Start Wizard ................................................................................................................ 17
2.3.1 Setting up the Password................................................................................................. 18
2.3.2 Setting up the Time Zone ............................................................................................... 18
2.3.3 Setting up the Internet Connection................................................................................. 19
2.3.4 Setting up the Wireless Connection ............................................................................... 23
2.3.5 Saving the Wizard Configuration.................................................................................... 27
2.4 Online Status......................................................................................................................... 27
2.5 Saving Configuration............................................................................................................. 28
TutorialsandApplications...............................................................................29
3.1 How to Configure Multi-VLAN in Vigor Router...................................................................... 29
3.2 LAN to LAN IPSec VPN between Vigor2130 and Vigor2820 using Main mode................... 33
Case 1: VPN direction from Vigor2130 to Vigor2820.............................................................. 33
Case 2: VPN direction from Vigor2820 to Vigor2130.............................................................. 37
3.3 LAN to LAN IPSec VPN between Vigor2130 and Vigor2820 usingAgressive mode........... 40
Case 1: VPN direction from Vigor2130 to Vigor2820.............................................................. 40
Case 2: VPN direction from Vigor2820 to Vigor2130.............................................................. 44
3.4 How to configure settings for DLNA Service in Vigor2130.................................................... 47
3.5 How to download BT Torrent to USB Device via Vigor Router............................................. 51
3.6 How to configure Dynamic DNS Service on Vigor2130........................................................ 58

Vigor2130 Series User’s Guide
vi
Web Configuration....................................................................................61
4.1 WAN...................................................................................................................................... 61
4.1.1 Internet Access............................................................................................................... 63
4.1.2 Multi-VLAN...................................................................................................................... 72
4.1.3 Ports................................................................................................................................ 74
4.1.4 Backup............................................................................................................................ 76
4.2 LAN ....................................................................................................................................... 78
4.2.1 General Setup................................................................................................................. 80
4.2.2 Ports................................................................................................................................ 82
4.2.3 MAC Address Table........................................................................................................ 84
4.2.4 VLAN............................................................................................................................... 85
4.2.5 Monitor Port.................................................................................................................... 86
4.2.6 Static Route.................................................................................................................... 87
4.2.7 Bind IP to MAC............................................................................................................... 89
4.3 NAT ....................................................................................................................................... 90
4.3.1 Hardware NAT................................................................................................................ 91
4.3.2 Open Ports...................................................................................................................... 91
4.3.3 DMZ Host........................................................................................................................ 93
4.4 Firewall.................................................................................................................................. 94
4.4.1 DoS Defense .................................................................................................................. 94
4.4.2 Ports Configuration......................................................................................................... 95
4.4.3 Access Control List......................................................................................................... 98
4.4.4 Traffic Control............................................................................................................... 110
4.5 CSM .....................................................................................................................................112
4.5.1 URL Content Filter........................................................................................................ 112
4.5.2 Web Content Filter........................................................................................................ 114
4.5.3 APP Enforcement......................................................................................................... 115
4.6 Bandwidth Management ......................................................................................................117
4.6.1 Session Limit ................................................................................................................ 118
4.6.2 Bandwidth Limit ............................................................................................................ 119
4.6.3 Port Rate Control.......................................................................................................... 121
4.6.4 QoS Control List ........................................................................................................... 121
4.6.5 Ports Priority................................................................................................................. 126
4.6.6 QoS Statistics............................................................................................................... 127
4.7 Applications......................................................................................................................... 130
4.7.1 Dynamic DNS............................................................................................................... 130
4.7.2 Schedule....................................................................................................................... 131
4.7.3 IGMP............................................................................................................................. 133
4.7.4 IGMP Status ................................................................................................................. 134
4.7.5 UPnP Configuration...................................................................................................... 134
4.7.6 Wake On LAN............................................................................................................... 136
4.8 VPN and Remote Access.................................................................................................... 137
4.8.1 Remote Access Control................................................................................................ 137
4.8.2 PPTP Remote Dial-in.................................................................................................... 138
4.8.3 IPSec Remote Dial-in ................................................................................................... 141
4.8.4 Remote Dial-in Status................................................................................................... 142
4.8.5 LAN to LAN................................................................................................................... 144

Vigor2130 Series User’s Guide vii
4.9 Wireless LAN ...................................................................................................................... 148
4.9.1 Basic Concepts............................................................................................................. 148
4.9.2 General Setup............................................................................................................... 150
4.9.3 Access Control.............................................................................................................. 156
4.9.4 Station List.................................................................................................................... 156
4.9.5 Access Point Discovery................................................................................................ 157
4.9.6 WMM Configuration...................................................................................................... 158
4.9.7 WDS.............................................................................................................................. 160
4.10 USB Application ................................................................................................................ 162
4.10.1 Disk Status.................................................................................................................. 162
4.10.2 File Explorer................................................................................................................ 163
4.10.3 FTP User Management .............................................................................................. 164
4.10.4 Disk Shares ................................................................................................................ 165
4.10.5 Bit Torrent Download.................................................................................................. 167
4.10.6 iTunes Server ............................................................................................................. 169
4.10.7 DLNA server............................................................................................................... 170
4.11 VoIP................................................................................................................................... 171
4.11.1 DialPlan ...................................................................................................................... 172
4.11.2 SIP Accounts.............................................................................................................. 179
4.11.3 Phone Settings ........................................................................................................... 182
4.11.4 Status.......................................................................................................................... 187
4.12 IPv6................................................................................................................................... 188
4.12.1 IPv6 WAN Setup......................................................................................................... 188
4.12.2 IPv6 LAN Setup.......................................................................................................... 193
4.12.3 IPv6 Firewall Setup..................................................................................................... 194
4.12.4 IPv6 Routing............................................................................................................... 197
4.12.5 IPv6 Neighbour........................................................................................................... 198
4.12.6 IPv6 TSPC Status....................................................................................................... 199
4.12.7 IPv6 Management....................................................................................................... 201
4.13 User................................................................................................................................... 202
4.13.1 User Configuration...................................................................................................... 202
4.14 System Maintenance......................................................................................................... 204
4.14.1 System Status............................................................................................................. 205
4.14.2 TR-069........................................................................................................................ 207
4.14.3 System Password....................................................................................................... 208
4.14.4 User Password ........................................................................................................... 209
4.14.5 Configuration Backup ................................................................................................. 211
4.14.6 Syslog/Mail Alert......................................................................................................... 213
4.14.7 Time and Date............................................................................................................ 215
4.14.8 Management............................................................................................................... 216
4.14.9 Reboot System........................................................................................................... 217
4.14.10 Firmware Upgrade.................................................................................................... 217
4.15 Diagnostics........................................................................................................................ 218
4.15.1 Ping............................................................................................................................. 218
4.15.2 Trace Route................................................................................................................ 219
4.15.3 Routing Table ............................................................................................................. 219
4.15.4 System Log................................................................................................................. 220
4.15.5 Traffic Overview.......................................................................................................... 221
4.15.6 Detailed Statistics....................................................................................................... 222
4.15.7 MAC Address Table.................................................................................................... 224
4.15.8 DHCP Table................................................................................................................ 225
4.15.9 Data Flow Monitor....................................................................................................... 226
4.15.10 Sessions Table......................................................................................................... 227

Vigor2130 Series User’s Guide
viii
4.15.11 Ports State................................................................................................................ 228
Trouble Shooting.....................................................................................229
5.1 Checking If the Hardware Status Is OK or Not.................................................................... 229
5.2 Checking If the Network Connection Settings on Your Computer Is OK or Not ................. 230
5.3 Pinging the Router from Your Computer............................................................................. 232
5.4 Checking If the ISP Settings are OK or Not........................................................................ 233
5.5 Forcing Vigor Router into TFTP Mode for Performing the Firmware Upgrade................... 234
5.6 Backing to Factory Default Setting If Necessary ................................................................ 237
5.7 Contacting Your Dealer....................................................................................................... 238

Vigor2130 Series User’s Guide 1
P Pr re ef fa ac ce e
The Vigor2130 series are the routers with high speed in data transmission through WAN port
and LAN ports. With hardware NAT acceleration, the rate of Vigor2130 series can be ideal for
multi-media application.
With the development of NGN (Next Generation Network), you may recently hear the news
about FTTx deployment in your local area or even have already subscribed the unbundling last
mile service (e.g. VDSL2) from local ITSP for FTTx. As adopting FTTx, the main question
for end users is whether your legacy router could fully utilize its bandwidth or not.
For example, you purchase a 120 Mbps Internet connection from your ISP but your existing
router cannot support 90 Mbps throughput. That’s why DrayTek launches Vigor2130 series –
High speed Gigabit router, perfectly complied with VDSL2 environment including Vigor2130,
Vigor2130n and Vigor2130Vn for speed-wanted customers. With high throughput
performance and secured broadband connectivity provided by Vigor2130 series, you can
simultaneously engage these bandwidth-intensive applications, such as high-definition video
streaming, online gaming, and Internet telephony / access.
1
1. .1 1 F Fe ea at tu ur re es s
zGigabit WAN port and embedded hardware NAT deliver ultra-fast speed from WAN to
LAN
zGigabit LAN ports stream content to wired devices with unprecedented speeds
z2 USB ports provides fast access to an external USB hard drive
zEmbedded DLNA server/iTune server supports stream content to Media Players
zUp to 800 Mpbs throughput for downstream
zAdvanced QoS for Data, Music, VoIP and Video
zEasy-to-use firewall
zVoIP facilities for low cost call (V model)
1
1. .2 2 W We eb b C Co on nf fi ig gu ur ra at ti io on n B Bu ut tt to on ns s E Ex xp pl la an na at ti io on n
Several main buttons appeared on the web pages are defined as the following:
Save and apply current settings.
Cancel current settings and recover to the previous saved settings.
Clear all the selections and parameters settings, including selection from
drop-down list. All the values must be reset with factory default settings.
Add new settings for specified item.
Edit the settings for the selected item.
Delete the selected item with the corresponding settings.

Vigor2130 Series User’s Guide
2
Note: For the other buttons shown on the web pages, please refer to Chapter 4 for detailed
explanation.
1
1. .3 3 L LE ED D I In nd di ic ca at to or rs s a an nd d C Co on nn ne ec ct to or rs s
Before you use the Vigor router, please get acquainted with the LED indicators and connectors
first.
1
1. .3 3. .1 1 F Fo or r V Vi ig go or r2 21 13 30 0
LED Status Explanation
Blinking The router is powered on and running
normally.
ACT
(Activity)
Off The router is powered off.
On Hardware NAT is enabled.HPA
Off Hardware NAT is disabled.
On (Orange) The port is connected with 100Mbps.
On (Green) The port is connected with 1000Mbps.
Off The port is disconnected.
WAN
Blinking It will blink while transmitting data.
On (Orange) The port is connected with 100Mbps.
On (Green) The port is connected with 1000Mbps.
Off The port is disconnected.
LAN
1/2/3/4
Blinking The data is transmitting.
On A USB device is connected and active.USB1/2
Blinking The data is transmitting.
VPN On The VPN tunnel is active.
QoS On The QoS function is active.
On The DoS/DDoS function is active. DoS
Blinking It will blink while detecting an attack.
Interfac
eDescription
WAN Connector for accessing the Internet.
LAN
(1/2/3/4)
Connectors for local networked devices.
USB
(1/2)
Connector for USB storage device (Pen Driver/Mobile
HD) or printer or 3G backup.

Vigor2130 Series User’s Guide 3
Interface Description
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press
the hole and keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart with the
factory default configuration.
PWR Connector for a power adapter.
ON/OFF Power Switch.

Vigor2130 Series User’s Guide
4
1
1. .3 3. .2 2 F Fo or r V Vi ig go or r2 21 13 30 0n n
LED Status Explanation
Blinking The router is powered on and running
normally.
ACT
(Activity)
Off The router is powered off.
On Hardware NAT is enabled.HPA
Off Hardware NAT is disabled.
On (Orange) The port is connected with 100Mbps.
On (Green) The port is connected with 1000Mbps.
Off The port is disconnected.
WAN
Blinking It will blink while transmitting data.
On (Orange) The port is connected with 100Mbps.
On (Green) The port is connected with 1000Mbps.
Off The port is disconnected.
LAN
1/2/3/4
Blinking The data is transmitting.
On A USB device is connected and active.USB1/2
Blinking The data is transmitting.
VPN On The VPN tunnel is active.
QoS On The QoS function is active.
On Wireless access point is ready.WLAN
Blinking It will blink while wireless traffic goes
through.
On Press this button for 2 seconds to wait
for client device making network
connection through WPS. When the
LED lights up, the WPS connection
will be on.
Off The WPS is off.
WPS
Button
Blinking Waiting for wireless client sending
requests for connection about two
minutes.
Interface Description
WLAN Press the button once to enable (WLAN LED on) or
disable (WLAN LED off) wireless connection.
WAN Connector for accessing the Internet.
LAN
(1/2/3/4)
Connectors for local networked devices.
USB (1/2) Connector for USB storage device (Pen Driver/Mobile
HD) or printer or 3G backup.

Vigor2130 Series User’s Guide 5
Interface Description
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press
the hole and keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart with the factory
default configuration.
PWR Connector for a power adapter.
ON/OFF Power Switch.

Vigor2130 Series User’s Guide
6
1
1. .3 3. .3 3 F Fo or r V Vi ig go or r2 21 13 30 0V Vn n
LED Status Explanation
Blinking The router is powered on and running
normally.
ACT
(Activity)
Off The router is powered off.
On Hardware NAT is enabled.HPA
Off Hardware NAT is disabled.
On (Orange) The port is connected with 100Mbps.
On (Green) The port is connected with 1000Mbps.
Off The port is disconnected.
WAN
Blinking It will blink while transmitting data.
On (Orange) The port is connected with 100Mbps.
On (Green) The port is connected with 1000Mbps.
Off The port is disconnected.
LAN
1/2/3/4
Blinking The data is transmitting.
On A USB device is connected and active.USB1/2
Blinking The data is transmitting.
On The phone connected to this port is
off-hook.
Off The phone connected to this port is
on-hook.
Phone1/
Phone2
Blinking A phone call comes.
On Wireless access point is ready.WLAN
Blinking It will blink while wireless traffic goes
through.
On Press this button for 2 seconds to wait
for client device making network
connection through WPS. When the
LED lights up, the WPS connection will
be on.
Off The WPS is off.
WPS
Button
Blinking Waiting for wireless client sending
requests for connection about two
minutes.
Interface Description
WLAN Press the button once to enable (WLAN LED on) or
disable (WLAN LED off) wireless connection.
WAN Connector for accessing the Internet.
LAN
(1/2/3/4)
Connectors for local networked devices.
USB (1/2) Connector for USB storage device (Pen Driver/Mobile
HD) or printer or 3G backup.

Vigor2130 Series User’s Guide 7
Interface Description
Phone2/Phone1 Connector of analog phone for VoIP communication.
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press
the hole and keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart with the factory
default configuration.
PWR Connector for a power adapter.
ON/OFF Power Switch.

Vigor2130 Series User’s Guide
8
1
1. .4 4 H Ha ar rd dw wa ar re e I In ns st ta al ll la at ti io on n
Before starting to configure the router, you have to connect your devices correctly.
1. Connect this device to a modem with a RJ-45 cable.
2. Connect one port of 4-port switch to your computer with a RJ-45 cable. This device
allows you to connect 4 PCs directly.
3. Connect Phone port to a conventional analog telephone.
4. Connect detachable antennas to the router for Vigor2130 series (n model).
5. Connect one end of the power cord to the power port of this device. Connect the other
end to the wall outlet of electricity.
6. Power on the router.
7. Check the ACT and WAN, LAN LEDs to assure network connections.
(For the detailed information of LED status, please refer to section 1.1.)
Caution: Each of the Phone ports can be connected to an analog phone only. Do not
connect the phone ports to the land line jack. Such connection might damage your router.

Vigor2130 Series User’s Guide 9
S
St ta an nd d I In ns st ta al ll la at ti io on n
The Vigor2130 must be placed erectly. Therefore you have to install a stand onto the router to
make it standing firmly. Please follow the figures listed below to finish the installation.
c d
ef

Vigor2130 Series User’s Guide
10
1
1. .5 5 P Pr ri in nt te er r I In ns st ta al ll la at ti io on n
You can install a printer onto the router for sharing printing. All the PCs connected this router
can print documents via the router. The example provided here is made based on Windows
XP/2000. For Windows 98/SE/Vista, please visit www.draytek.com.
Before using it, please follow the steps below to configure settings for connected computers
(or wireless clients).
1. Connect the printer with the router through USB/parallel port.
2. Open Start->Settings-> Printer and Faxes.
3. Open File->Add a New Computer. A welcome dialog will appear. Please click Next.

Vigor2130 Series User’s Guide 11
4. Click Local printer attached to this computer and click Next.
5. In this dialog, choose Create a new port Type of port and use the drop down list to
select Standard TCP/IP Port. Click Next.

Vigor2130 Series User’s Guide
12
6. In the following dialog, type 192.168.1.1 (router’s LAN IP) in the field of Printer Name
or IP Address and type IP_192.168.1.1 as the port name. Then, click Next.
7. Click Standard and choose Generic Network Card.
8. Then, in the following dialog, click Finish.