Draytek Vigor 2750 Series User manual

Vigor2750 Series Quick Start Guide
i

Vigor2750 Series Quick Start Guide ii

Vigor2750 Series Quick Start Guide
iii
Vigor2750 Series
High Speed VDSL2 Router
Quick Start Guide
Version: 1.0
Firmware Version:V1.4.0_RC2
Date: 12/08/2010

Vigor2750 Series Quick Start Guide
i
Copyright Information
Copyright
Declarations
Copyright 2010 All rights reserved. This publication contains information that is
protected by copyright. No part may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language without written
permission from the copyright holders.
Trademarks
The following trademarks are used in this document:
zMicrosoft is a registered trademark of Microsoft Corp.
zWindows, Windows 95, 98, Me, NT, 2000, XP, Vista and Explorer are
trademarks of Microsoft Corp.
zApple and Mac OS are registered trademarks of Apple Inc.
zOther products may be trademarks or registered trademarks of their
respective manufacturers.
Safety Instructions and Approval
Safety
Instructions
zRead the installation guide thoroughly before you set up the router.
zThe router is a complicated electronic unit that may be repaired only be
authorized and qualified personnel. Do not try to open or repair the
router yourself.
zDo not place the router in a damp or humid place, e.g. a bathroom.
zDo not stack the routers.
zThe router should be used in a sheltered area, within a temperature range
of +5 to +40 Celsius.
zDo not expose the router to direct sunlight or other heat sources. The
housing and electronic components may be damaged by direct sunlight
or heat sources.
zDo not deploy the cable for LAN connection outdoor to prevent
electronic shock hazards.
zKeep the package out of reach of children.
zWhen you want to dispose of the router, please follow local regulations
on conservation of the environment.
Warranty
We warrant to the original end user (purchaser) that the router will be free
from any defects in workmanship or materials for a period of two (2) years
from the date of purchase from the dealer. Please keep your purchase receipt in
a safe place as it serves as proof of date of purchase. During the warranty
period, and upon proof of purchase, should the product have indications of
failure due to faulty workmanship and/or materials, we will, at our discretion,
repair or replace the defective products or components, without charge for
either parts or labor, to whatever extent we deem necessary tore-store the
product to proper operating condition. Any replacement will consist of a new
or re-manufactured functionally equivalent product of equal value, and will be
offered solely at our discretion. This warranty will not apply if the product is
modified, misused, tampered with, damaged by an act of God, or subjected to
abnormal working conditions. The warranty does not cover the bundled or
licensed software of other vendors. Defects which do not significantly affect
the usability of the product will not be covered by the warranty. We reserve
the right to revise the manual and online documentation and to make changes
from time to time in the contents hereof without obligation to notify any
person of such revision or changes.
Be a Registered
Owner Web registration is preferred. You can register your Vigor router via
http://www.draytek.com.
Firmware & Tools
Updates Due to the continuous evolution of DrayTek technology, all routers will be
regularly upgraded. Please consult the DrayTek web site for more information
on newest firmware, tools and documents.
http://www.draytek.com

Vigor2750 Series Quick Start Guide ii
European Community Declarations
Manufacturer: DrayTek Corp.
Address: No. 26, Fu Shing Road, HuKou Township, HsinChu Industrial Park, Hsin-Chu, Taiwan
303
Product: Vigor2750 Series Router
DrayTek Corp. declares that Vigor2750 Series of routers are in compliance with the following essential
requirements and other relevant provisions of R&TTE Directive 1999/5/EEC.
The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive
2004/108/EC by complying with the requirements set forth in EN55022/Class B and EN55024/Class B.
The product conforms to the requirements of Low Voltage (LVD) Directive 2006/95/EC by complying
with the requirements set forth in EN60950-1.
Regulatory Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one of the following measures:
zReorient or relocate the receiving antenna.
zIncrease the separation between the equipment and receiver.
zConnect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
zConsult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device may accept any interference received, including interference that may cause undesired
operation.
Please visit http://www.draytek.com/user/AboutRegulatory.php
This product is designed for DSL, 2.4GHz/5GHz WLAN network throughout the EC region and
Switzerland with restrictions in France. Please see the user manual for the applicable networks on your
product.

Vigor2750 Series Quick Start Guide
iii
T
Ta ab bl le e o of f C Co on nt te en nt ts s
1. Introduction........................................................................................................... 1
1.1 Panel Explanation ...................................................................................................................... 2
1.1.1 For Vigor2750 ............................................................................................................... 2
1.1.2 For Vigor2750n ............................................................................................................. 4
1.1.3 For Vigor2750Vn...........................................................................................................6
1.2 Package Content........................................................................................................................ 8
2. Installing Your Router........................................................................................... 9
2.1 Hardware Installation.................................................................................................................. 9
Stand Installation.................................................................................................................. 10
2.2 Printer Installation......................................................................................................................11
3. Configuring Web Pages ..................................................................................... 17
3.1 Accessing Web Page ............................................................................................................... 17
3.2 Basic Configuration.................................................................................................................. 18
4. Trouble Shooting................................................................................................ 25
4.1 Checking If the Hardware Status Is OK or Not......................................................................... 25
4.2 Checking If the Network Connection Settings on Your Computer Is OK or Not ...................... 26
4.3 Pinging the Router from Your Computer.................................................................................. 28
4.4 Checking If the ISP Settings are OK or Not............................................................................. 29
4.5 Backing to Factory Default Setting If Necessary...................................................................... 30
4.6 Contacting Your Dealer ............................................................................................................ 31

Vigor2750 Series Quick Start Guide
1
1
1. . I In nt tr ro od du uc ct ti io on n
The Vigor2750 series are the routers with high speed in data transmission through DSL
port and LAN ports.
With the development of NGN (Next Generation Network), you may recently hear the
news about FTTx deployment in your local area or even have already subscribed the
unbundling last mile service (e.g. VDSL2) from local ITSP for FTTx. As adopting FTTx,
the main question for end users is whether your legacy router could fully utilize its
bandwidth or not.
DrayTek launches Vigor 2750 series – High speed router, perfectly complied with
VDSL2 environment including Vigor2750, Vigor2750n and Vigor2750Vn for
speed-wanted customers. With high throughput performance and secured broadband
connectivity provided by Vigor 2750 series, you can simultaneously engage these
bandwidth-intensive applications, such as high-definition video streaming, online gaming,
and Internet telephony / access.
Vigor2750 supports up to 2 VPN tunnels using advanced protocols such as IPSec/PPTP
(for remote dial-in only) with AES/3DES for encryption and MD5/SHA-1 for
authentication.
Vigor2750 ‘n’ models comply with 802.11n Draft-n standards. They support
WEP/WPA/WPA2 encryption and MAC Address Control.
Vigor2750 ‘V’ models provide two analogue phone connectors. It supports multiple SIP
registrars with high flexible configuration and call handing options.
In addition, Vigor2750 series supports two USB interfaces for connecting USB printer to
share printer or USB storage device for sharing files and 3G backup service. Vigor2750
series provides two-level management to simplify the configuration of network
connection. The user mode allows user accessing into WEB interface via simple
configuration. However, if users want to have advanced configurations, they can access
into WEB interface through admin mode.

Vigor2750 Series Quick Start Guide 2
1
1. .1 1 P Pa an ne el l E Ex xp pl la an na at ti io on n
1
1. .1 1. .1 1 F Fo or r V Vi ig go or r2 27 75 50 0
LED Status Explanation
Blinking The router is powered on and running
normally.
ACT
(Activity) Off The router is powered off.
On Hardware NAT is enabled.HPA
(Hardware
Packet
Accelerate)
Off Hardware NAT is disabled.
On The DSL port is connected.
Blinking
(Slowly) The router is ready.
DSL
Blinking
(Quickly) The connection is training.
On
(Green) The port is connected with 1000Mbps.
Blinking
(Green) The data is transmitting.
On
(Orange) The port is connected with 100Mbps.
LAN1/2/3/4
Blinking
(Orange) The data is transmitting.
USB1/2 On A USB device is connected and active.
VPN On The VPN tunnel is active.
QoS On The QoS function is active.
DoS On The DoS/DDoS function is active.
Interface Description
DSL Connector for accessing the Internet.
LAN (1-4) Connectors for local network devices.
USB (1-2) Connector for USB storage device (Pen
Driver/Mobile HD) or printer or 3G backup.

Vigor2750 Series Quick Start Guide
3
Interface Description
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press
the hole and keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart with the
factory default configuration.
PWR Connector for a power adapter.
I / O Power switch.

Vigor2750 Series Quick Start Guide 4
1
1. .1 1. .2 2 F Fo or r V Vi ig go or r2 27 75 50 0n n
LED Status Explanation
Blinking The router is powered on and running
normally.
ACT
(Activity) Off The router is powered off.
On Hardware NAT is enabled.HPA
(Hardware
Packet
Accelerate)
Off Hardware NAT is disabled.
On The DSL port is connected.
Blinking
(Slowly) The router is ready.
DSL
Blinking
(Quickly) The connection is training.
On
(Green) The port is connected with 1000Mbps.
Blinking
(Green) The data is transmitting.
On
(Orange) The port is connected with 100Mbps.
LAN1/2/3/4
Blinking
(Orange) The data is transmitting.
USB1/2 On A USB device is connected and active.
VPN On The VPN tunnel is active.
QoS On The QoS function is active.
WLAN On Wireless access point is ready.
On Press this button for 2 seconds to wait
for client device making network
connection through WPS. When the
LED lights up, the WPS connection
will be on.
WPS Button
Off The WPS is off.
Interface Description
WLAN Press the button once to enable (WLAN LED on) or
disable (WLAN LED off) wireless connection.
DSL Connector for accessing the Internet.
LAN (1-4) Connectors for local network devices.
USB (1-2) Connector for USB storage device (Pen
Driver/Mobile HD) or printer or 3G backup.

Vigor2750 Series Quick Start Guide
5
Interface Description
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press
the hole and keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart with the
factory default configuration.
PWR Connector for a power adapter.
I / O Power switch.

Vigor2750 Series Quick Start Guide 6
1
1. .1 1. .3 3 F Fo or r V Vi ig go or r2 27 75 50 0V Vn n
LED Status Explanation
Blinking The router is powered on and running
normally.
ACT
(Activity) Off The router is powered off.
On Hardware NAT is enabled.HPA
(Hardware
Packet
Accelerate)
Off Hardware NAT is disabled.
On The DSL port is connected.
Blinking
(Slowly) The router is ready.
DSL
On
(Green) The port is connected with 1000Mbps.
On
(Green) The port is connected with 1000Mbps.
Blinking
(Green) The data is transmitting.
On
(Orange) The port is connected with 100Mbps.
LAN1/2/3/4
Blinking
(Orange) The data is transmitting.
USB1/2 On A USB device is connected and active.
On The phone connected to this port is
off-hook.
Off The phone connected to this port is
on-hook.
Phone1/
Phone2
Blinking A phone call comes.
WLAN On Wireless access point is ready.
On Press this button for 2 seconds to wait
for client device making network
connection through WPS. When the
LED lights up, the WPS connection
will be on.
WPS Button
Off The WPS is off.
Interface Description
WLAN Press the button once to enable (WLAN LED on) or
disable (WLAN LED off) wireless connection.
DSL Connector for accessing the Internet.
LAN (1-4) Connectors for local network devices.
USB (1-2) Connector for USB storage device (Pen
Driver/Mobile HD) or printer or 3G backup.

Vigor2750 Series Quick Start Guide
7
Interface Description
Phone2/Phone1 Connector of analog phone for VoIP communication.
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press
the hole and keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart with the
factory default configuration.
PWR Connector for a power adapter.
I / O Power switch.

Vigor2750 Series Quick Start Guide 8
1
1. .2 2 P Pa ac ck ka ag ge e C Co on nt te en nt t
nQuick Start Guide oCD
pRJ-45 Cable (Ethernet) qAntenna (n models)
rStand
sThe type of the power adapter depends on the country that the router will be installed.
* The maximum power consumption is 17-23 Watt.
UK-type Power Adapter EU-type Power Adapter
USA/Taiwan-type Power Adapter AU/NZ-type Power Adapter

Vigor2750 Series Quick Start Guide
9
2
2. . I In ns st ta al ll li in ng g Y Yo ou ur r R Ro ou ut te er r
This section will guide you to install the router through hardware connection and
configure the router’s settings through web browser.
2
2. .1 1 H Ha ar rd dw wa ar re e I In ns st ta al ll la at ti io on n
Before starting to configure the router, you have to connect your devices correctly.
1. Connect the DSL interface to Internet with a VDSL2 line cable.
2. Connect one port of 4-port switch to your computer with a RJ-45 cable. This device
allows you to connect 4 PCs directly.
3. Connect Phone port to a conventional analog telephone.
4. Connect detachable antennas to the router for Vigor2750 series (n model).
5. Connect one end of the power cord to the power port of this device. Connect the
other end to the wall outlet of electricity.
6. Power on the router.
7. Check the ACT and DSL, LAN LEDs to assure network connection.
(For the detailed information of LED status, please refer to section 1.1.)

Vigor2750 Series Quick Start Guide 10
S
St ta an nd d I In ns st ta al ll la at ti io on n
The Vigor2750 must be placed erectly. Therefore you have to install a stand onto the
router to make it standing firmly. Please follow the figures listed below to finish the
installation.
c d
ef

Vigor2750 Series Quick Start Guide
11
2
2. .2 2 P Pr ri in nt te er r I In ns st ta al ll la at ti io on n
You can install a printer onto the router for sharing printing. All the PCs connected this
router can print documents via the router. The example provided here is made based on
Windows XP/2000. For Windows 98/SE/Vista, please visit www.draytek.com.
Before using it, please follow the steps below to configure settings for connected
computers (or wireless clients).
1. Connect the printer with the router through USB port.
2. Open Start->Settings-> Printer and Faxes.

Vigor2750 Series Quick Start Guide 12
3. Open File->Add a New Computer. A welcome dialog will appear. Please click
Next.
4. Click Local printer attached to this computer and click Next.
5. In this dialog, choose Create a new port Type of port and use the drop down list to
select Standard TCP/IP Port. Click Next.