Draytek Vigor2760 User manual

i

ii
Vigor2760 Series
High Speed VDSL2 Router
Quick Start Guide
Version: 1.6
Firmware Version: V3.8.2.1
(For future update, please visit DrayTek web site)
Date: January 20, 2017

i
Intellectual Property Rights (IPR) Information
Copyrights © All rights reserved. This publication contains information that is protected
by copyright. No part may be reproduced, transmitted, transcribed, stored in
a retrieval system, or translated into any language without written permission
from the copyright holders.
Trademarks The following trademarks are used in this document:
Microsoft is a registered trademark of Microsoft Corp.
Windows, Windows 95, 98, Me, NT, 2000, XP, Vista, 7, 8 and Explorer are
trademarks of Microsoft Corp.
Apple and Mac OS are registered trademarks of Apple Inc.
Other products may be trademarks or registered trademarks of their
respective manufacturers.
Safety Instructions and Approval
Safety
Instructions
Read the installation guide thoroughly before you set up the router.
The router is a complicated electronic unit that may be repaired only be
authorized and qualified personnel. Do not try to open or repair the
router yourself.
Do not place the router in a damp or humid place, e.g. a bathroom.
Do not stack the routers.
The router should be used in a sheltered area, within a temperature
range of 0 to +45 Celsius.
Do not expose the router to direct sunlight or other heat sources. The
housing and electronic components may be damaged by direct sunlight
or heat sources.
Do not deploy the cable for LAN connection outdoor to prevent
electronic shock hazards.
Keep the package out of reach of children.
When you want to dispose of the router, please follow local regulations
on conservation of the environment.
Warranty
We warrant to the original end user (purchaser) that the router will be free
from any defects in workmanship or materials for a period of two (2) years
from the date of purchase from the dealer. Please keep your purchase receipt
in a safe place as it serves as proof of date of purchase. During the warranty
period, and upon proof of purchase, should the product have indications of
failure due to faulty workmanship and/or materials, we will, at our discretion,
repair or replace the defective products or components, without charge for
either parts or labor, to whatever extent we deem necessary tore-store the
product to proper operating condition. Any replacement will consist of a new
or re-manufactured functionally equivalent product of equal value, and will
be offered solely at our discretion. This warranty will not apply if the product
is modified, misused, tampered with, damaged by an act of God, or subjected
to abnormal working conditions. The warranty does not cover the bundled or
licensed software of other vendors. Defects which do not significantly affect
the usability of the product will not be covered by the warranty. We reserve
the right to revise the manual and online documentation and to make changes
from time to time in the contents hereof without obligation to notify any
person of such revision or changes.

ii
European Community Declarations
Manufacturer: DrayTek Corp.
Address: No. 26, Fu Shing Road, HuKou Township, HsinChu Industrial Park, Hsin-Chu
County, Taiwan 303
Product: Vigor2760 Series
DrayTek Corp. declares that Vigor2760 Series of routers are in compliance with the following
essential requirements and other relevant provisions of R&TTE Directive 1999/5/EEC.
The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive
2004/108/EC by complying with the requirements set forth in EN55022/Class B and
EN55024/Class B.
The product conforms to the requirements of Low Voltage (LVD) Directive 2006/95/EC by
complying with the requirements set forth in EN60950-1.
This product is designed for POTS, DSL, 2.4GHz WLAN network throughout the EC region and
Switzerland with restrictions in France. Please see the user manual for the applicable networks
on your product.
Regulatory Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own
expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device may accept any interference received, including interference that may cause
undesired operation.
RF Exposure Warning
This equipment must be installed and operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide a separation distance of at
least 20 cm from all persons and must not be co-located or operating in conjunction with any
other antenna or transmitter. End-users and installers must be provided with antenna
installation instructions and transmitter operating conditions for satisfying RF exposure
compliance.
Caution
Any changes or modifications not expressly approved by the grantee of this device could void the
user's authority to operate the equipment.
The antenna/transmitter should be kept at least 20 cm away from human body.
DrayTek Vigor2760 series VDSL2/ADSL2+ routers are compliant with 47 C.F.R. Part 68.

iii
IC Regulatory Information
Product: Vigor2760Vn, Vigor2760n
IC: 20803-V2760
Canadian Representative:
Company Name: Network Systems Solutions Canada Inc.
Company Address: 56 Rory Road, North York, ON, M6L 3G1
Company Telephone: [phone]
This radio transmitter (IC:20803-V2760) has been approved by Industry Canada to operate with
the antenna types listed below with the maximum permissible gain indicated. Antenna types not
included in this list, having a gain greater than the maximum gain indicated for that type, are
strictly prohibited for use with this device.
Dipole antenna, maximum permissible gain: 2.1 dBi
Le présent émetteur radio (IC:20803-V2760) a été approuvé par Industrie Canada pour
fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal.
Les types d'antenne non inclus dans cette liste, et dont le gain est supérieur au gain maximal
indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
Dipole antenna, maximal admissible gain: 2.1 dBi
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
This product meets the applicable Innovation, Science and Economic Development Canada
technical specifications.
The Ringer Equivalence Number (REN) indicates the maximum number of devices allowed to
be connected to a telephone interface. The termination of an interface may consist of any
combination of devices subject only to the requirement that the sum of the RENs of all the
devices not exceed five.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil
ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Le présent produit est conforme aux spécifications techniques applicables d'Innovation,
Sciences et Développement économique Canada.
L'indice d'équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de dispositifs qui
peuvent être raccordés à une interface téléphonique. La terminaison d'une interface peut
consister en une combinaison quelconque de dispositifs, à la seule condition que la somme
des IES de tous les dispositifs n'excède pas cinq.

iv
Product: Vigor2760
IC: 20803-2760
Canadian Representative:
Company Name: Network Systems Solutions Canada Inc.
Company Address: 56 Rory Road, North York, ON, M6L 3G1
Company Telephone: [phone]
This product meets the applicable Innovation, Science and Economic Development Canada
technical specifications.
The Ringer Equivalence Number (REN) indicates the maximum number of devices allowed to
be connected to a telephone interface. The termination of an interface may consist of any
combination of devices subject only to the requirement that the sum of the RENs of all the
devices not exceed five.
Le présent produit est conforme aux spécifications techniques applicables d'Innovation,
Sciences et Développement économique Canada.
L'indice d'équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de dispositifs qui
peuvent être raccordés à une interface téléphonique. La terminaison d'une interface peut
consister en une combinaison quelconque de dispositifs, à la seule condition que la somme
des IES de tous les dispositifs n'excède pas cinq.
More update, please visit www.draytek.com.

v
Be a Registered Owner
Web registration is preferred. You can register your Vigor router via http://www.draytek.com.
Firmware & Tools Updates
Due to the continuous evolution of DrayTek technology, all routers will be regularly upgraded.
Please consult the DrayTek web site for more information on newest firmware, tools and
documents.
http://www.draytek.com

vi
T
Ta ab bl le e o of f C Co on nt te en nt ts s
1. Introduction........................................................................................................... 1
2. Package Content .................................................................................................. 2
3. Panel Explanation................................................................................................. 3
3.1 Vigor2760................................................................................................................................... 3
3.2 Vigor2760n................................................................................................................................. 5
3.3 Vigor2760Vn............................................................................................................................... 7
4. Hardware Installation ........................................................................................... 9
4.1 Network Connection................................................................................................................... 9
4.2 Wall-Mounted Installation..........................................................................................................11
5. Software Configuration...................................................................................... 12
6. Customer Service............................................................................................... 17

1
1
1. . I In nt tr ro od du uc ct ti io on n
The Vigor2760 series are the routers with high speed in data transmission through
DSL port and LAN ports.
With the development of NGN (Next Generation Network), you may recently hear
the news about FTTx deployment in your local area or even have already
subscribed the unbundling last mile service (e.g. VDSL2) from local ITSP for FTTx.
As adopting FTTx, the main question for end users is whether your legacy router
could fully utilize its bandwidth or not.
DrayTek launches Vigor2760 series – High speed router, perfectly complied with
VDSL2 environment including Vigor2760, Vigor2760n and Vigor2760Vn for
speed-wanted customers. With high throughput performance and secured
broadband connectivity provided by Vigor2760 series, you can simultaneously
engage these bandwidth-intensive applications, such as high-definition video
streaming, online gaming, and Internet telephony / access.
Vigor2760 supports VPN tunnel(s) using advanced protocols such as IPSec/PPTP
(for remote dial-in only) with AES/3DES for encryption and MD5/SHA-1 for
authentication.
Vigor2760 ‘n’ models comply with 802.11n standards. They support
WEP/WPA/WPA2 encryption and MAC Address Control.
Vigor2760 ‘V’ models provide two analogue phone connectors. It supports
multiple SIP registrars with high flexible configuration and call handing options.
In addition, Vigor2760 series supports two USB interfaces for connecting USB
printer to share the printer or USB storage device for sharing files and 3G/4G
backup services.

2
2
2. . P Pa ac ck ka ag ge e C Co on nt te en nt t
Take a look at the package content. If there is anything missed or damaged,
please contact DrayTek or dealer immediately.
Vigor router
Quick Start Guide
RJ-45 Cable (Ethernet)
RJ-11 to RJ-11 Cable (Annex A)
RJ-11 to RJ-45 Cable (Annex B)
RJ-45 to RJ-45 Cable (Annex B)
Antenna (for “n” model)
The type of the power adapter depends on the country that the router will be
installed. * The maximum power consumption is 17-23 Watt.
UK-type Power Adapter
EU-type Power Adapter
USA/Taiwan-type Power Adapter
AU/NZ-type Power Adapter

3
3
3. . P Pa an ne el l E Ex xp pl la an na at ti io on n
3
3. .1 1 V Vi ig go or r2 27 76 60 0
LED Status Explanation
Blinking The router is powered on and running normally.
(Activity) Off The router is powered off.
On The DSL port is connected.
Blinking
(Slowly) The router is ready.
DSL Blinking
(Quickly) The router is trying to connect to Internet.
On The LAN port is connected.
Blinking The data is transmitting.
~
LAN1/2/3/4
Off The LAN port is disconnected.
~
USB1/2
On A USB device is connected and active.

4
Interface Description
PWR Connector for a power adapter.
I / O Power Switch.
Factory Reset Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will
restart with the factory default configuration.
VDSL/ADSL Connector for accessing the Internet.
USB1~USB2 Connector for a USB device (for 3G/4G USB Modem or printer).
GigaLAN1~LAN4 Connectors for local networked devices.

5
3
3. .2 2 V Vi ig go or r2 27 76 60 0n n
LED Status Explanation
Blinking The router is powered on and running normally.
(Activity) Off The router is powered off.
On (Green)
The wireless access point is ready.
Blinking
(Green) The data is transmitting via wireless connection.
Blinking
(Orange) Blinks with one second cycle for two minutes. The WPS function is active.
(Wireless LAN
On/Off/WPS)
Off The wireless access point is turned off.
On The DSL port is connected.
Blinking
(Slowly) The router is ready.
DSL Blinking
(Quickly) The router is trying to connect to Internet.
On The LAN port is connected.
Blinking The data is transmitting.
~
LAN1/2/3/4
Off The LAN port is disconnected.
~
USB1/2
On A USB device is connected and active.

6
Interface Description
PWR Connector for a power adapter.
I / O Power Switch.
Factory Reset Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will
restart with the factory default configuration.
WLAN
ON/OFF/WPS WLAN On - Press the button and release it within 2 seconds. When
the wireless function is ready, the green LED will be on.
WLAN Off - Press the button and release it within 2 seconds to turn
off the WLAN function. When the wireless function is not ready, the
LED will be off.
WPS - When WPS function is enabled by web user interface, press
this button for morethan 2 seconds to wait for client’s device making
network connection through WPS.
VDSL/ADSL Connector for accessing the Internet.
USB1~USB2 Connector for a USB device (for 3G/4G USB Modem or printer).
GigaLAN1~LAN4 Connectors for local networked devices.

7
3
3. .3 3 V Vi ig go or r2 27 76 60 0V Vn n
LED Status Explanation
Blinking The router is powered on and running normally.
(Activity) Off The router is powered off.
On A PSTN phone call comes (in and out). However,
when the phone call is disconnected, the LED
will be off for awhile.
(LINE) Off There is no PSTN phone call.
On The phone connected to this port is off-hook.
Off The phone connected to this port is on-hook.
(Phone1/Phone
2) Blinking A phone call comes.
On (Green)
The wireless access point is ready.
Blinking
(Green) The data is transmitting via wireless connection.
Blinking
(Orange) Blinks with one second cycle for two minutes. The WPS function is active.
(Wireless LAN
On/Off/WPS)
Off The wireless access point is turned off.
On The DSL port is connected.
Blinking
(Slowly) The router is ready.
DSL Blinking
(Quickly) The router is trying to connect to Internet.
On The LAN port is connected.
Blinking The data is transmitting.
~
LAN1/2/3/4
Off The LAN port is disconnected.
~
USB1/2
On A USB device is connected and active.

8
Interface Description
PWR Connector for a power adapter.
I / O Power Switch.
Factory Reset Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will
restart with the factory default configuration.
WLAN
ON/OFF/WPS WLAN On - Press the button and release it within 2 seconds. When
the wireless function is ready, the green LED will be on.
WLAN Off - Press the button and release it within 2 seconds to turn
off the WLAN function. When the wireless function is not ready, the
LED will be off.
WPS - When WPS function is enabled by web user interface, press
this button for morethan 2 seconds to wait for client’s device making
network connection through WPS.
VDSL/ADSL Connector for accessing the Internet.
USB1~USB2 Connector for a USB device (for 3G/4G USB Modem or printer).
GigaLAN1~LAN4 Connectors for local networked devices.
Interface Description
Line Connector for PSTN life line.
Phone1/
Phone2 Connector of analog phone for VoIP communication.

9
4
4. . H Ha ar rd dw wa ar re e I In ns st ta al ll la at ti io on n
This section will guide you to install the router through hardware connection and
configure the router’s settings through web browser.
Before starting to configure the router (taking “Vn” model as an example.), you
have to connect your devices correctly.
4
4. .1 1 N Ne et tw wo or rk k C Co on nn ne ec ct ti io on n
1. Connect the XDSL interface to the external XDSL splitter with an XDSL line
cable for all models. For Vigor2760Vn, also connect Line interface to
external XDSL splitter.
2. Connect one port of 4-port switch to your computer with a RJ-45 cable. This
device allows you to connect 4 PCs directly.
3. Connect Phone port to a conventional analog telephone (for V model only).
4. Connect detachable antennas to the router for Vigor2760 series (for n model
only).
5. Connect one end of the power cord to the power port of this device.
Connect the other end to the wall outlet of electricity.
6. Power on the router.
7. Check the ACT and DSL, LAN LEDs to assure network connection.

10
(For the detailed information of LED status, please refer to section 1.1.)

11
4
4. .2 2 W Wa al ll l- -M Mo ou un nt te ed d I In ns st ta al ll la at ti io on n
Vigor2760 has keyhole type mounting slots on the underside.
1. A template is provided on the Vigor2760 packaging box to enable you to
space the screws correctly on the wall.
2. Place the template on the wall and drill the holes according to the
recommended instruction.
3. Fit screws into the wall using the appropriate type of wall plug.
Note
The recommended drill diameter shall be 6.5mm (1/4”).
4. When you finished about procedure, the router has been mounted on the
wall firmly.

12
5
5. . S So of ft tw wa ar re e C Co on nf fi ig gu ur ra at ti io on n
To access Internet, please finish basic configuration after completing the
hardware installation.
The Quick Start Wizard is designed for you to easily set up your router for
Internet access. You can directly access the Quick Start Wizard via Web
Configurator.
Make sure your PC connects to the router correctly.
Note
You may either simply set up your computer to get IP dynamically
from the router or set up the IP address of the computer to be the
same subnet as the default IP address of Vigor router
192.168.1.1. For the detailed information, please refer to the
section - Trouble Shooting in the User’s Guide.
Open a web browser on your PC and type http://192.168.1.1. A pop-up window
will open to ask for username and password. Please type “admin/admin” as the
Username/Password and click Login.