Draytek Vigor2762n User manual

i

ii
Vigor2762 Series
ADSL2/2+ & VDSL2 Router
Quick Start Guide
Version: 1.1
Firmware Version: V3.8.8
(For future update, please visit DrayTek web site)
Date: March 19, 2018

i
Intellectual Property Rights (IPR) Information
Copyrights © All rights reserved. This publication contains information that is protected
by copyright. No part may be reproduced, transmitted, transcribed, stored in
a retrieval system, or translated into any language without written permission
from the copyright holders.
Trademarks The following trademarks are used in this document:
Microsoft is a registered trademark of Microsoft Corp.
Windows, Windows 95, 98, Me, NT, 2000, XP, Vista, 7, 8 and Explorer are
trademarks of Microsoft Corp.
Apple and Mac OS are registered trademarks of Apple Inc.
Other products may be trademarks or registered trademarks of their
respective manufacturers.
Safety Instructions and Approval
Safety
Instructions
Read the installation guide thoroughly before you set up the router.
The router is a complicated electronic unit that may be repaired only be
authorized and qualified personnel. Do not try to open or repair the
router yourself.
Do not place the router in a damp or humid place, e.g. a bathroom.
Do not stack the routers.
The router should be used in a sheltered area, within a temperature
range of 0 to +40 Celsius.
Do not expose the router to direct sunlight or other heat sources. The
housing and electronic components may be damaged by direct sunlight
or heat sources.
Do not deploy the cable for LAN connection outdoor to prevent
electronic shock hazards.
Keep the package out of reach of children.
When you want to dispose of the router, please follow local regulations
on conservation of the environment.
Warranty
We warrant to the original end user (purchaser) that the router will be free
from any defects in workmanship or materials for a period of two (2) years
from the date of purchase from the dealer. Please keep your purchase receipt
in a safe place as it serves as proof of date of purchase. During the warranty
period, and upon proof of purchase, should the product have indications of
failure due to faulty workmanship and/or materials, we will, at our discretion,
repair or replace the defective products or components, without charge for
either parts or labor, to whatever extent we deem necessary tore-store the
product to proper operating condition. Any replacement will consist of a new
or re-manufactured functionally equivalent product of equal value, and will
be offered solely at our discretion. This warranty will not apply if the product
is modified, misused, tampered with, damaged by an act of God, or subjected
to abnormal working conditions. The warranty does not cover the bundled or
licensed software of other vendors. Defects which do not significantly affect
the usability of the product will not be covered by the warranty. We reserve
the right to revise the manual and online documentation and to make changes
from time to time in the contents hereof without obligation to notify any
person of such revision or changes.

ii
Declaration of Conformity
Hereby, DrayTek Corporation declares that the radio equipment type Vigor2762 is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
http://www.draytek.com.tw/ftp/Vigor2762/Document/CE/
Manufacturer: DrayTek Corp.
Address: No. 26, Fu Shing Road, HuKou Township, HsinChu Industrial Park, Hsin-Chu County,
Taiwan 303
Product: Vigor2762 Series
Frequency Information for Europe area:
2.4G WLAN 2412MHz - 2472 MHz, max. TX power: 19.98dBm *1
5G WLAN 5180MHz - 5700 MHz, max. TX power: 27.00dBm *2
Requirements in AT/BE/BG/CZ/DZ/DK/EE/FR/DE/IS/IE/IT/EL/ES/
CY/LV/LI/LT/LU/HU/MT/NL/NO/PL/PT/RO/SI/SK/TR/FI/SE/CH/
UK/HR. 5150MHz~5350MHz is for indoor use only.
(*1: for 2.4G WLAN model; *2: for 5G WLAN model)
This product is designed for DSL, POTS and 2.4GHz /5GHz WLAN network throughout the EC region.
Regulatory Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device may accept any interference received, including interference that may cause
undesired operation.
RF Exposure Warning
This equipment must be installed and operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20

iii
cm from all persons and must not be co-located or operating in conjunction with any other antenna or
transmitter. End-users and installers must be provided with antenna installation instructions and
transmitter operating conditions for satisfying RF exposure compliance.
Caution
Any changes or modifications not expressly approved by the grantee of this device could void the
user's authority to operate the equipment.
The antenna/transmitter should be kept at least 20 cm away from human body.
More update, please visit www.draytek.com.

iv
T
Ta ab bl le e o of f C Co on nt te en nt ts s
1. Introduction........................................................................................................... 1
2. Package Content .................................................................................................. 2
3. Panel Explanation................................................................................................. 3
4. Hardware Installation ........................................................................................... 5
4.1 Network Connection................................................................................................................... 5
4.2 Wall-Mounted Installation........................................................................................................... 6
5. Software Configuration........................................................................................ 7
6. Customer Service............................................................................................... 12
Be a Registered Owner.................................................................................................................. 12
Firmware & Tools Updates............................................................................................................. 12

1
1
1. . I In nt tr ro od du uc ct ti io on n
The Vigor2762 series are the routers with high speed in data transmission through
DSL port and LAN ports.
DrayTek launches Vigor2762 series – high speed router, perfectly complied with
VDSL2 environment including Vigor2762n (2.4GHz), Vigor2762ac (2.4GHz/5GHz)
and Vigor2762Vac (2.4GHz/5GHz with VoIP feature) for speed-wanted customers.
With high throughput performance and secured broadband connectivity provided
by Vigor2762 series, you can simultaneously engage these bandwidth-intensive
applications, such as high-definition video streaming, online gaming, and
Internet telephony / access.
Vigor2762 supports VPN tunnel(s) using advanced protocols such as IPSec/PPTP
(for remote dial-in only) with AES/3DES for encryption and MD5/SHA-1 for
authentication.
Through the central management for multiple access points, Vigor router can set
wireless profile in advance and apply to the access point managed easily and
conveniently.
In addition, Vigor2762 series supports two USB interfaces for connecting USB
printer to share the printer or USB storage device for sharing files and 3G/4G
backup services.

2
2
2. . P Pa ac ck ka ag ge e C Co on nt te en nt t
Take a look at the package content. If there is anything missed or damaged,
please contact DrayTek or dealer immediately.
Vigor router
Quick Start Guide
RJ-45 Cable (Ethernet) RJ-11 to RJ-11 Cable (Annex A)
RJ-11 to RJ-45 Cable (Annex B)
RJ-45 to RJ-45 Cable (Annex B)
Antenna (for “n” or “ac” model)
The type of the power adapter depends on the country that the router will be
installed. * The maximum power consumption is 17-23 Watt.
UK-type Power Adapter
EU-type Power Adapter
USA/Taiwan-type Power Adapter
AU/NZ-type Power Adapter

3
3
3. . P Pa an ne el l E Ex xp pl la an na at ti io on n
LED Status Explanation
Blinking The router is powered on and running normally.
(Activity) Off The router is powered off.
On The phone connected to this port is off-hook.
Off The phone connected to this port is on-hook.
(for “V” model) Blinking A phone call comes.
On (Green) The wireless access point is ready.
Blinking
(Green) The data is transmitting via wireless connection based on the rate of 2.4GHz.
Blinking
(Orange) Blinks with one second cycle for two minutes. The WPS function is active.
(Wireless LAN
On/Off/WPS)
Off The wireless access point is turned off.
On (Green) The wireless access point is ready.
Blinking
(Green) The data is transmitting via wireless connection based on the rate of 5GHz.
(Wireless LAN
On/Off/WPS) Blinking
(Orange) Blinks with one second cycle for two minutes. The WPS function is active.
On A USB device is connected and active.
(USB) Blinking The data is transmitting.
On The DSL port is connected.
Blinking
(Slowly) The router is ready.
(DSL)
Blinking
(Quickly) The router is trying to connect to Internet.
On The LAN port is connected.
Blinking The data is transmitting.
~ Off The LAN port is disconnected.

4
(LAN1/2/3/4)
Interface Description
WLAN
ON/OFF/WPS WLAN On - Press the button and release it within 2 seconds. When
the wireless function is ready, the green LED will be on.
WLAN Off - Press the button and release it within 2 seconds to turn
off the WLAN function. When the wireless function is not ready, the
LED will be off.
WPS - When WPS function is enabled by web user interface, press
this button for morethan 2 seconds to wait for client’s device making
network connection through WPS.
Factory Reset Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will
restart with the factory default configuration.
USB1~USB2 Connector for a USB device (for 3G/4G USB Modem or printer).
GigaLAN1~LAN4 Connectors for local networked devices.
DSL Connector for accessing the Internet.
Phone2/Phone1
(for “V” model) Connector of analog phone for VoIP communication.
I / O Power Switch.
PWR Connector for a power adapter.

5
4
4. . H Ha ar rd dw wa ar re e I In ns st ta al ll la at ti io on n
This section will guide you to install the router through hardware connection and
configure the router’s settings through web browser.
Before starting to configure the router, you have to connect your devices
correctly.
4
4. .1 1 N Ne et tw wo or rk k C Co on nn ne ec ct ti io on n
1. Connect the DSL interface to the land line jack with a DSL line cable.
2. Connect one port of 4-port switch to your computer with a RJ-45 cable. This
device allows you to connect 4 PCs directly.
3. Connect detachable antennas to the router.
4. Connect one end of the power cord to the power port of this device.
Connect the other end to the wall outlet of electricity.
5. Power on the router.
6. Check the ACT and DSL, LAN LEDs to assure network connection.
(For the detailed information of LED status, please refer to section 1.1.)

6
4
4. .2 2 W Wa al ll l- -M Mo ou un nt te ed d I In ns st ta al ll la at ti io on n
Vigor2762 wireless series has keyhole type mounting slots on the underside.
1. A template is provided on the Vigor2762 packaging box to enable you to
space the screws correctly on the wall.
2. Place the template on the wall and drill the holes according to the
recommended instruction.
3. Fit screws into the wall using the appropriate type of wall plug.
Note
The recommended drill diameter shall be 6.5mm (1/4”).
4. When you finished about procedure, the router has been mounted on the
wall firmly.

7
5
5. . S So of ft tw wa ar re e C Co on nf fi ig gu ur ra at ti io on n
To access Internet, please finish basic configuration after completing the
hardware installation.
The Quick Start Wizard is designed for you to easily set up your router for
Internet access. You can directly access the Quick Start Wizard via Web
Configurator.
Make sure your PC connects to the router correctly.
Note You may either simply set up your computer to get IP dynamically
from the router or set up the IP address of the computer to be the
same subnet as the default IP address of Vigor router
192.168.1.1. For the detailed information, please refer to the
section - Trouble Shooting in the User’s Guide.
Open a web browser on your PC and type http://192.168.1.1. A pop-up window
will open to ask for username and password. Please type “admin/admin” as the
Username/Password and click Login.

8
Now, the Main Screen will pop up. Click Wizards>>Quick Start Wizard.
Note The home page will change slightly in accordance with the router
you have.
The first screen of Quick Start Wizard is entering login password. After typing
the password, please click Next.

9
On the next page as shown below, please select the WAN interface that you use.
If DSL interface is used, please choose WAN1; if Ethernet interface is used,
please choose WAN2; if 3G USB modem is used, please choose WAN3. Then click
Next for next step. WAN1, WAN2 and WAN3 will bring up different configuration
page. Here, we take WAN1 (ADSL/VDSL2) as an example.
On the next page as shown below, please select the appropriate protocol
according to the information from your ISP. For example, you should select
PPPoE mode if the ISP provides you PPPoE interface. Then click Next for next
step.
P
PP PP Po oE E/ /P PP PP Po oA A
1. Choose WAN1 as WAN Interface and click the Next button; you will get the
following page.

10
2. After finished the above settings, simply click Next.
3. Please manually enter the Username/Password provided by your ISP. Then
click Next for viewing summary of such connection.
4. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then,
the system status of this protocol will be shown.
5. Now, you can enjoy surfing on the Internet.

11
M
MP Po oA A / / S St ta at ti ic c o or r D Dy yn na am mi ic c I IP P
1. Choose WAN1 as WAN Interface and click the Next button; you will get the
following page.
2. Please type in the IP address/mask/gateway information originally provided
by your ISP. Then click Next for viewing summary of such connection.
3. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then,
the system status of this protocol will be shown.
4. Now, you can enjoy surfing on the Internet.

12
6
6. . C Cu us st to om me er r S Se er rv vi ic ce e
If the router cannot work correctly after trying many efforts, please contact your
dealer/DrayTek for further help right away. For any questions, please feel free
to send e-mail to “[email protected]”.
B
Be e a a R Re eg gi is st te er re ed d O Ow wn ne er r
Web registration is preferred. You can register your Vigor router via
http://www.draytek.com.
F
Fi ir rm mw wa ar re e & & T To oo ol ls s U Up pd da at te es s
Due to the continuous evolution of DrayTek technology, all routers will be
regularly upgraded. Please consult the DrayTek web site for more information on
newest firmware, tools and documents.
http://www.draytek.com