Dream On Me 634 User manual

1
Adult assembly required.
Small parts may present choking hazard prior to assembly.
quickly assemble your products. Before you begin we recommend
y.
2. Identify all parts and hardware.
3. Y
Philips head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills or Drivers
To protect your parts during assembly please place them on a soft
surface.
To clean surface use only water on a damp cloth. Do not use
window cleaners or cleaning abrasives as it will scratch the surface
and could damage the protective coating.
ASSEMBLY INSTRUCTIONS
ITEM NO: 634
s
aced on the cribs to keep parents and
caregivers informed it is a requirement by law under CPSC And ASTM.
We do apologize for any inconvenience this may cause you.
Dream On Me Inc.
KEEP INSTRUCTIONS FOR FUTURE USE.
1532 S WASHINGTON AVE
PISCATAWAY TWP NJ 08854
www.dreamonme.com
634
Comes with a mattress.
Scannez le code QR pour enregistrer votre produit
https://dreamonme.com/customercare/registration/

2

3
WARNING !
MADE IN CHINA
· FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS
COULD RESULT IN SERIOUS INJURY OR DEA
· READ ALL INSTRUCTIONS BEFORE P INSTRUCTIONS
WARE, LOOSE JOINTS, MISSING
PARTS OR SHARP EDGES BEFORE AND AFTER ASSEMBL
FOR REPLACEMENT PARTS AND INSTRUCTIONAL
· T ATRICIANS RECOMMEND HEALTHY INFANTS
· STRINGS CAN CAUSE STRANGULATION! DO NOT PLACE ITEMS WITH A STRING
AROUND A CHILD’S
· TO HELP ATION TIGHTEN ALL F A CHILD CAN
TRAP PARTS OF THE BODY OR CLOTHING ON LOOSE F
· DO NOT PLACE CRIB NEAR WINDOWS WHERE CORDS FROM BLINDS OR DRAPS
MAY STRANGLE A
· WHEN CHILD IS ABLE TO PULL TO A STANDING POSITION, SET MATTRESS TO THE
LOWEST POSITION PADS, LARGE TOYS AND OTHER
OBJECTS THAT COULD SER AS STEPS FOR CLIMBING OUT
· WHEN CHILD IS ABLE T
THE CRIB SHALL
· DO NOT USE A WATER MA
· IF REFINISHING, USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN'S
OR OTHER PLASTIC FILM AS MATTRESS
Y CAN CAUSE SUFFOCA
· INFANTS CAN SUFFOCATE IN GAPS BETWEEN A MATTRESS TOO SMALL OR TOO
· FOLLOW WARNINGS ON ALL PRODUCT

=
4

5
e.5/8” Allen head Bolt 4 pcs f. Nut x 4 pcs
f. Écrou x 4 pcs
a. 3” Allen head Bolt 8 pcs
B. Front Rail (1PC)
A. Back Rail (1PC)
A. B.
CONNECTION HARDWARE
QUINCAILLERIE DE CONNEXION
b. Barrel Nuts 16 pcs
d. Allen Wrench 1 pcs
CRIB COMPONENTS
C. Left side pannel (1PC)
C.
c. 1” Allen head Bolt 4 pcs
c. Vis à six pans 1” 4 pcs
5/8”
No drills necessary.
Do not use power
screwdriver
Phillips Screwdriver
(not supplied)
(1PC) (1PC)
D. Right side pannel (1PC)
D.
J. Wooden mattress base (1PC)
r.
Left support brackets (2PCS)
Crochet du support de
matelas gauche(2PCS)
s.
Right support brackets (2PCS)
Crochet du support de
matelas droit (2PCS)
8
t
K. Mattress (1PC)
K. Matelas (1PC)
E. Montant arrière gauche (2PCS)
F. Montant arrière droit (2PCS)

STEP
Attach the back rail (A) to the left leg(E)
and right leg(F) by using allen head
bolts(a).
6
(C) (F)
(E)
(a)
(b) (D)
(H) (G)
(b) (a)
(A)
(E) (F)
Attach the left side pannel (C) to the left
front leg (F) and the left back leg (E) by
using allen head bolts (a) & bolts (t) and
barrel nuts (b) . Then attach the right side
pannel (D) to the right front leg (H) and the
right back leg(G) by using allen
bolts(a) & bolts (t) and barrel nuts(b).
C
D
E
F
E
F
t
t
t
t
t
t
t
t
t
b
b
b
b
bb
b
b
b
F
CX 8
b
b
b
b
a
a
a
a
A
C
D
X 4
ab
A
C

7
STEP 3
3
STEP 4
Attach the Left support brackets (r) and
Right support brackets (s) to the
Wooden mattress base(J)
by using allen head bolts(c) and Nut(f) .
Fixez les supports
gauche (r) et droit (s)
à la base du matelas
en bois (J) à l’aide des
vis à tête à six pans
creux (c) et
de l’écrou (f).
J
JJ
r
r
r
r
f
f
f
f
c
c
c
c
c
X 4
X 4
Attach the wooden mattress base(J)
to the left back leg(E) and right back
leg(G) and Left Front Leg (F) and
Right Front Leg (H) by using allen head bolts(e).
C
D
A
J
e
e
e
e
e
S
J
AD
X 4

8
STEP
STEP 6
6
Attach the front rail (B) to the
left front leg (F) and right front
leg (H), By using allen head
bolts (a), and barrel nuts(b).
TIGHTEN ALL SCREWS.
Put the mattress(K) into the bed.
K
B
C
D
a
a
a
a
b
b
b
b
a
b
B
C
X 4

9
Remove the front rail(B).
1.Remove the Wooden mattress
base(J) and remove the right
side pannel(I) and the left side
pannel (H).
2.Use the front rail as footboard
of the bed,the back rail as headboard
3.Connect the headboard and footboard
which is sold separately.
NOT INCLUDED T T
Converting crib to a twin bed I
J
A
C
D

10
Converting crib to a twin bed II
You have the option to convert crib to a twin bed II.
bed II.
hardware ) which are not included and sold separately.
sold separately.
Conversion kit is sold separately