Dream On Me FOLDING FULL SIZE CRIB User manual

Read all instructions before
assembling and using product.
IMPORTANT - Keep instructions for
future use. 0322R1-673
Owner’s Manual
FOLDING FULL SIZE
CRIB
Scan the QR code to register your product
https://dreamonme.com/customercare/registration/



SAFETY TIPS
Adult Assembly
Required.
DO NOT use the
product if it is
damaged, broken,
and/or components are
missing or broken.
To protect your parts
during assembly,
please place them on a
soft surface.
Contact Dream On
Me in case of any
assistance needed.
Small parts may
present choking
hazard prior to
assembly.
Please read the
instructions
thoroughly. Identify all
parts & hardware.
Do Not Use Power
Drills or Drivers.
To clean surface, use
only water on a damp
cloth. Do not use
window cleaner or
cleaning abrasive as it
will scratch the surface
and could damage the
protective coating.
For a Safe and
comfortable Sleep
experience, we
suggest using Dream
On Me Greenguard
Gold Certified
Full-Size Mattress.
0-6
2www.dreamonme.com/help

…. for choosing Dream On Me and congratulations on joining our family;
a family that has been transforming lives for over 30+ years!
We appreciate your feedback and wish you the very best in the
coming years with your new addition. If you have any questions
or concerns please don’t hesitate to reach out to us. One of our
trusted Customer Care representatives will be happy to assist you.
Thank you again for entrusting us to provide you with safe
and affordable baby products and accessories.
THANK YOU...
LIMITED WARRANTY:
• Dream On Me warrants its product to be free from defects in material and
workmanship and agrees to remedy any such defect.
• This warranty covers 1 year from the date of original purchase.
• This warranty is valid only upon presentation of proof of purchase.
• This is solely limited to the repair or replacement of defective furniture
components and no assembly labor is included.
• This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or
repaired in any way.
• This warranty gives you specific legal rights and you may also have other
rights which vary from State to State.
www.dreamonme.com/help 3

WARNINGS
www.dreamonme.com/help
4
• FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD RESULT IN
SERIOUS INJURY OR DEATH.
• TO REDUCE THE RISK OF SIDS(SUDDEN INFANT DEATH SYNDROME), PEDIATRICIANS
RECOMMEND HEALTHY INFANTS BE PLACED ON THEIR BACKS TO SLEEP, UNLESS
OTHERWISE ADVISED BY YOUR PHYSICIAN.
• CHECK THIS PRODUCT FOR DAMAGED HARDWARE, LOOSE JOINTS, MISSING PARTS OR
SHARP EDGES BEFORE AND AFTER ASSEMBLY AND FREQUENTLY DURING USE.
• DO NOT USE THIS CRIB IF ANY PARTS ARE MISSING, DAMAGED OR BROKEN. CONTACT
DREAM ON ME - 1532 S. WASHINGTON AVE, PISCATAWAY, NJ 08854 FOR REPLACEMENT
PARTS.
• DO NOT USE A WATER MATTRESS WITH THIS CRIB.
• IF REFINISHING, USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN’S PRODUCTS.
STRANGULATION HAZARD:
• STRINGS CAUSE STRANGULATION! DO NOT PLACE ITEMS WITH A STRING AROUND A CHILD’S
NECK, SUCH AS HOOD STRINGS OR PACIFIER CORDS. DO NOT SUSPEND STRINGS OVER A
CRIB OR ATTACH STRINGS TO TOYS.
• TO HELP PREVENT STRANGULATION TIGHTEN ALL FASTENERS. A CHILD CAN TRAP PARTS OF
BODY OR CLOTHING ON LOOSE FASTENERS.
• DO NOT PLACE CRIB NEAR WINDOW WHERE CORDS FROM BLINDS OR DRAPES MAY
STRANGLE A CHILD.
• INFANTS CAN SUFFOCATE ON SOFT BEDDING.
• NEVER ADD A PILLOW, COMFORTER OR PADDING.
• NEVER PLACE ADDITIONAL PADDING UNDER INFANT.
• NEVER USE PLASTIC SHIPPING BAGS OR ANY PLASTIC FILM AS MATTRESS COVERS,
BECAUSE THEY CAN CAUSE SUFFOCATION.
• INFANTS CAN SUFFOCATE IN GAPS BETWEEN CRIB SIDES AND A MATTRESS THAT IS TOO
SMALL. ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 IN (69 CM) BY 51-5/8
IN (131 CM), WITH A THICKNESS NOT EXCEEDING 6 IN (15CM) AND A MINIMUM THICKNESS
OF 4 IN (10 CM). THE DIMENSIONS OF THE MATTRESS SHALL BE TAKEN FROM SEAM TO
SEAM OR EDGE TO EDGE WHERE APPROPRIATE.
FALL HAZARD:
• WHEN CHILD IS ABLE TO PULL TO STANDING POSITION, SET MATTRESS TO LOWEST
POSITION AND REMOVE BUMPER PADS, LARGE TOYS AND OTHER OBJECTS THAT COULD
SERVE AS STEPS FOR CLIMBING OUT. AFTER RAISING SIDE, MAKE SURE LATCHES ARE
SECURE (DISREGARD FOR NON-DROP SIDE CRIB).
• DO NOT LEAVE CHILD IN CRIB WITH SIDES LOWERED. BE SURE SIDE IS IN RAISED AND
LOCKED POSITION WHENEVER CHILD IS IN CRIB (DISREGARD FOR NON-DROP SIDE CRIB).
• STOP USING CRIB WHEN CHILD BEGINS TO CLIMB OUT OR REACHES THE HEIGHT OF 35 IN
(89 CM).
• WHEN STORING CRIB USE CAUTION AS EXTREME CHANGES IN TEMPERATURE OR HUMIDITY
CAN COMPROMISE THE CRIB MAKING IT EXTREMELY DANGEROUS TO YOUR CHILD.
• USE CAUTION WHEN A VAPORIZER OR HUMIDIFIER IS IN USE. ALWAYS AIM VAPOR AWAY
FROM THE CRIB AS WELL AS ANY OTHER WOODEN FURNITURE. PROLONGED PERIODS OF
HUMIDITY IN STORAGE AS WELL AS IN THE HOME CAN COMPROMISE THE CRIB.
• AVOID USING VAPORIZERS AND HUMIDIFIERS FOR PROLONGED PERIODS OF TIME.
• FOLLOW WARNINGS ON ALL PRODUCTS IN CRIB.

www.dreamonme.com/help 5
WARNINGS (cont.)
• DO NOT USE THIS CRIB IF YOU CANNOT EXACTLY FOLLOW THE ACCOMPANYING
INSTRUCTIONS.
• DO NOT USE THIS CRIB FOR A CHILD WHO CAN CLIMB OUT OF IT OR WHO IS
TALLER THAN 90 CM.
• DO NOT PLACE IN OR NEAR THIS CRIB ANY CORD, STRAP OR SIMILAR ITEM THAT
COULD BECOME WRAPPED AROUND A CHILD’S NECK.
• DO NOT PLACE THIS CRIB NEAR A WINDOW OR A PATIO DOOR WHERE THE
CHILD COULD REACH THE CORD OF A BLIND OR CURTAIN AND BE STRANGLED.
• CHECK THIS CRIB REGULARLY BEFORE USING IT AND DO NOT USE IT IF ANY
PARTS ARE LOOSE OR MISSING OR IF THERE ARE ANY SIGNS OF DAMAGE. DO
NOT SUBSTITUTE PARTS. CONTACT THE MANUFACTURER IF REPLACEMENT
PARTS OR ADDITIONAL INSTRUCTIONS ARE NEEDED.
• USE A CRIB MATTRESS THAT IS NO THICKER THAN 15 CM AND IS OF SUCH A
SIZE THAT, WHEN IT IS PUSHED FIRMLY AGAINST ANY SIDE OF CRIB, IT DOES
NOT LEAVE A GAP OF MORE THAN 3 CM BETWEEN THE MATTRESS AND ANY
PART OF THE SIDES OF THE CRIB.
• CHILDREN CAN SUFFOCATE ON SOFT BEDDING. DO NOT PLACE PILLOWS,
COMFORTERS OR SOFT MATTRESS IN THIS CRIB.
WARNING

PARTS
www.dreamonme.com/help
6
If there are any missing parts, please contact Dream On Me before using the
product.
Left Panel
1Right Panel 2
Front and Back Panel (x2)
3
Mattress Board
5
Stabilizer Bar
4

www.dreamonme.com/help 7
HARDWARE
If there are any missing parts, please contact Dream On Me before using the
product.
Bolt 2-1/8” (×10)
ABarrel Nuts (×10) BAllen Key C
Washer (x10)
GLatch 1 (x2) HLatch 2 (x2) I
Wooden Dowels (x2)
DCastors (×4) ESpring Washer
(x10)
F
Screw 5/8” (x6)
JScrew 3/4” (x4) KPlastic Block (x2) L
Philips Screw Driver (NOT INCLUDED) Wrench (NOT INCLUDED)
Tools Needed:

www.dreamonme.com/help
8
Latch 1 (x1)
HLatch 2 (x1)
I
Screw 5/8” (x3)
JScrew 3/4” (x2) KPlastic Block (x1) L
(H)
(I)
(2)
(2)
(L)
(K)
(K)
(2)
(J)
(J)
(J)
1
CRIB ASSEMBLY - RIGHT SIDE PANEL ASSEMBLY
1a. Place the Right Panel (2) on a soft
surface and align the Latch 1 (H) and
Latch 2 (I) as shown in the
illustration. Similarly, align the
Plastic Block (L) to the panel.
1b. Attach the Screw (J) in the insertions
provided on the latches. Similarly,
attach the Screw (K) in the insertions
given on the plastic block.
1c. Tighten the screws into the
insertions using a Philips Screw
Driver (Not Included).
1d. Once all the fixtures are secured,
lock the latches on the bottom of
the panel as illustrated.
NOTE: Do not overtighten the screws.

www.dreamonme.com/help 9
Latch 1 (x1)
HLatch 2 (x1)
I
Screw 5/8” (x3)
JScrew 3/4” (x2) KPlastic Block (x1) L
(1)
(L)
(K)
(K)
(1)
(H)
(I)
(1)
(J) (J)
(J)
2
CRIB ASSEMBLY - LEFT SIDE PANEL ASSEMBLY
2a. Place the Left Panel (1) on a soft
surface and align the Latch 1 (H) and
Latch 2 (I) as shown in the
illustration. Similarly, align the
Plastic Block (L) to the panel.
2b. Attach the Screw (J) in the insertions
provided on the latches. Similarly,
attach the Screw (K) in the insertions
given on the plastic block.
2c. Tighten the screws into the
insertions using a Philips Screw
Driver (NOT INCLUDED).
2d. Once all the fixtures are secured,
lock the latches on the bottom of
the panel.
NOTE: Do not overtighten the screws.

www.dreamonme.com/help
10
Bolt 2-1/8” (×6)
ABarrel Nuts (×6) B
Washer (x6)
G
Wooden Dowels (x2)
DSpring Washer
(x6)
F
(A) (F) (G)
(D)
(4)
(1)
(2)
(2)
(3)
(B)
(L)
3
CRIB ASSEMBLY - FRONT PANEL ASSEMBLY
3a. Align the Front Panel (3) to
the assembled side panels as
shown in the illustration.
3b. Position the Wooden Dowels
(D) between the Stabilizer Bar
(4) and the side panels.
3c. Attach the Barrel Nuts (B) in
the insertions provided on the
stabilizer and the front panel.
3d. Position the Washer (G) and
the Spring Washer (F) on the
insertions provided on the
legs of the side panels.
Attach the Bolts (A) into the
insertions securing the parts.
3e. Tighten the bolts into the
barrel nuts using the Allen
Key (C) provided.
NOTE: Do not overtighten the
bolts.

www.dreamonme.com/help 11
(5)
(5)
4
CRIB ASSEMBLY - MATTRESS BOARD ASSEMBLY
4a. To assemble the Mattress
Board (5), position the metal
pins provided on the board into
the notches of the side panels.
4b. Move the mattress board up
and down to adjust the mattress
height to the required level.

www.dreamonme.com/help
12
Bolt 2-1/8” (×4)
ABarrel Nuts (×4) B
Washer (x4)
G
Spring Washer
(x4)
F
(3)
(3)
(B)
(F)
(A)
(2)
(G)
5
CRIB ASSEMBLY - BACK PANEL ASSEMBLY
5a. Align the Back Panel (3) to the side
panels as shown in the illustration.
5b. Attach the Barrel Nuts (B) in the
insertions provided on the back
panel.
5c. Position the Washer (G) and the
Spring Washer (F) on the
insertions provided on the legs of
the side panels.
5d. Attach the Bolts (A) into the
insertions provided on the legs of
the side panels. Tighten the bolts
into the barrel nuts using the Allen
Key (C) provided.
5e. Lock the mattress board in place
by snapping the handle on the
board to the back panel.

www.dreamonme.com/help 13
Castors (×4)
E
(E)
6
CRIB ASSEMBLY - CASTOR WHEELS ASSEMBLY
6a. Assemble the Castors (E) to the
legs of the crib as shown in the
illustration.
6b. The castors with brakes are to be
attached to the front legs of the
crib.

www.dreamonme.com/help
14
7
CRIB ASSEMBLY - MATTRESS SUPPORT ASSEMBLY
7a. To adjust the height levels of the
mattress, use both of your hands
to lift up the mattress board.
7b. Slide the bolt underneath the
mattress board to keep the
mattress support fixed.

www.dreamonme.com/help 15
1
FOLDING DIRECTIONS
1a. Release the handle on the mattress
board from the back panel, as
shown in the illustration.
1b. Lift the mattress board towards the
front panel and snap the handle to
the front panel.
1c. Secure the mattress board to the
front panel for folding the crib.
1d. Unlock the latches on the bottom of
the side panels as illustrated.

www.dreamonme.com/help 16
2
FOLDING DIRECTIONS
2a. To fold the crib, push the handles of
both the side panels inside as
illustrated.
2b. The crib folds flat for easy and
compact storage.

www.dreamonme.com/help
17
CRIB CARE INSTRUCTIONS
ROOM CLIMATE CONTROL:
• Wood, when first cut contains more than 50 percent water. When it is prepared for
furniture construction it is placed in a Kiln and the moisture content is brought down
to 8 to 10 percent. Wood is porous and responds to its environment. If the room has
high humidity it will absorb it and expand and if the humidity is low it will lose
moisture and shrink.
• It is important that the humidity levels in the room be controlled from extremes of
too much humidity or too little. Furniture should not be placed close to the
air-conditioning outlets, fire places, radiators, space heaters, humidifiers or
dehumidifiers. Exposure to extreme variations of temperature and humidity can
damage any fine wood product.
THE IDEAL ENVIRONMENT FOR FINE FURNITURE:
• Fine wood furniture will have fewer problems when its environment is controlled at a
temperature between 65 and 75 degrees and a relative humidity between 35 and 40
percent. Wood placed in an environment outside of those limits can and will shrink
or expand and may develop some small cracks which are not material or structural
defects.
STICKING DOORS AND DRAWERS:
• With the minor changes in temperature and humidity, doors and drawers may swell
and be difficult to open or close. Tolerances have been built into the units but
extreme conditions may still cause sticking. This will adjust back to normal over
time but until it does consider using a dehumidifier or rub candle wax or paraffin on
sides that stick.
AVOID DIRECT SUNLIGHT:
• Keep the furniture out of direct sunlight. Ultraviolet rays will fade colors and in some
cases darken them. It can also cause crazing or hair line cracks in the finish. White
finishes will yellow naturally over time and exposure to direct sunlight will hasten
this natural process along with some woods darkening naturally over time; this is
not considered to be a quality defect.
PROPER STORAGE:
• If you need to put your furniture in storage for any period of time do not store them
in a damp basement or hot dry attic. Allow air movement around the furniture and
do not stack anything on it.

www.dreamonme.com/help 18
CRIB CARE INSTRUCTIONS (cont.)
IN GENERAL:
• Protect furniture surface from hot or extremely cold items.
• Use coasters under hot or cold beverages.
• Do not use synthetic fabric under accessories or lamps.
• Protect tops from pens, markers and crayons.
• Oils from potpourri and other scented items can damage the finish of the furniture.
• Do not drag items across the surface of the furniture.
• Allow the surface to breath by rotating your accessories and lamps.
• Do not over polish the furniture, do it only two or three times a year. Over polishing
can distort the natural finish of the product.
• Do not wax the furniture, as wax build up can destroy natural finish of the product.
• When moving furniture always lift the unit. Do not push or drag it to avoid damage
to legs.
• Keep the furniture level so doors and drawers open and close freely.
• Clean with a damp, not wet, cloth. Use only a mild soap. Do not use the abrasive
cleaners.
• Do not scratch or chip the finish.
• Inspect the product periodically, contact Dream On Me for replacement parts or
questions.
• Do not store the product or any parts in extreme temperatures and conditions such
as a hot attic or a damp, cold basement. These extremes can cause a loss of
structural integrity.
• To preserve the luster of the high-quality finish on your product, it is recommended
to place a doily or felt pad under any items you place on the finish.
• Clean with a damp cloth, then a dry cloth to preserve the original luster and beauty
of this fine finish.
• Do not use abrasive chemicals.
• Do not spray cleaners directly onto furniture.
• Lift slightly when moving on carpeting to prevent leg breakage.
• Use of a vaporizer near furniture will cause wood to swell and to peel.
YOU DID IT!
Congratulations Mom & Dad!
It's time to create your dream nursery. A safe, elegant
handcrafted crib that grows with your little one.

1532 S. WASHINGTON AVENUE
PISCATAWAY, NJ 08854
www.dreamonme.com
Follow Us @dreamonmeinc
to get your nursery featured on our social media.
Enter our monthly giveaway!
Scan the QR code to register.
Chat with us!
Scan the QR code to Live Chat.





Lisez toutes les instructions avant
d'assembler et d'utiliser le produit.
IMPORTANT - Conservez les
instructions pour une utilisation
future. 0322R1-673
Le manuel du propriétaire
FOLDING FULL SIZE
CRIB
Scannez le code QR pour enregistrer votre produit
https://dreamonme.com/customercare/registration/

