Dreamland R7502 User manual

Instructions for use
LUXURY VELVET
HEATED
OVERBLANKET
TYPE R7502
MI003679_R75.indd 1MI003679_R75.indd 1 07/04/20 18:4507/04/20 18:45

1
EN
ILLUSTRATIVE GUIDE
DESCRIPTION OF THE APPLIANCE
TECHNICAL DATA
1. Overblanket connector
2. Control unit connector
3. Mains socket
4. Rating label
5. Overblanket
6. Timer selector
7. ON/OFF button
8. Temperature selector
9. Stand-by LED
10. Auto shut off timer LED
11. Temperature LED
TYPE R7502
220-240 V 50/60 Hz 150 W
[A]
1 2
5
4
3
Temperature table
6Fast Pre-heat
5-4
Medium Pre-heat
3-1 Continuous or all night use
[C]
6
7
8
9
11
10
[B]
[D]
MI003679_R75.indd 1MI003679_R75.indd 1 07/04/20 18:4507/04/20 18:45

2
EN
Dear Customer, thank you for choosing our product. We feel certain
you will appreciate its quality and reliability as it was designed and
manufactured with customer satisfaction in mind. These instructions
for use are compliant with the European Standard EN 82079.
INDEX
Illustrative guide page 1
Description of the appliance page 1
Technical data page 1
Symbols page 2
Important instructions page 3
Use page 5
Cleaning and maintenance page 7
Storing the overblanket page 8
Troubleshooting page 9
Disposal page 9
Guarantee page 10
SYMBOLS
Class II appliance Prohibition
Read the instructions Information
Caution/Warning/Danger NOT to be used by very
young children (0-3 years)
Wash at a maximum
temperature of 30 °C on a
delicate cycle
Do not insert pins
Dry in a tumble dryer on
a delicate cycle at a low
temperature
Do not bleach
Do not iron Do not dry clean
MI003679_R75.indd 2MI003679_R75.indd 2 07/04/20 18:4507/04/20 18:45

3
EN
I MPORTANT INSTRUCTIONS.
RETAIN FOR FUTURE USE.
WARNING! Instructions and warnings for safe use.
Beforeusingthisappliance,carefully readtheinstructions
for use and in particular the safety notes and warnings,
which must be complied with. Keep this manual together
with its illustrative guide for future consultation. Should
you transfer the appliance to another user, make sure
you hand over this documentation as well.
NOTE: Should any part of this manual be difficult to understand or any
doubt arise, contact the company at the address indicated on the last
page before using the appliance.
NOTE: Persons with impaired vision may consult these instructions for
use in digital format at the website www.dreamlanduk.co.uk
• After unpacking, make sure the appliance is intact, complete with
all its parts as shown in the illustrative guide and with no sign of
damage. If in any doubt, do not use the appliance and contact an
authorised service centre.
WARNING! Risk of suffocation.
Children shall not play with the packaging. Keep the plastic bag
out of the reach of children.
• This appliance must be used only for the purpose for which it was
designed, namely as an overblanket for home use. Any other use
is considered not compliant with the intended use and therefore
dangerous.
• Before connecting the appliance to the mains supply, make sure
that the voltage and frequency indicated on the technical data of the
appliance correspond to those of the mains supply.The rating is on the
appliance or on the power supply unit, if any (see illustrative guide).
• This appliance can work automatically at a frequency of 50 Hz or 60 Hz.
• This appliance is only to be used with the types of detachable control
unit that are marked on the appliance.
MI003679_R75.indd 3MI003679_R75.indd 3 07/04/20 18:4507/04/20 18:45

4
EN
Children under the age of three are not to use this appliance
due to their inability to react to overheating.
• This appliance can be used by children older than 3 years and younger
than 8 years under supervision and with the control always set to
minimum temperature (heat setting 1).
• This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning
and user maintenance must not be carried out by children without
supervision.
• This appliance must not be used by persons insensitive to heat and other
very vulnerable persons who are unable to react to overheating.
• The cable and control unit of the appliance can give rise to risks
of entanglement, strangulation, tripping or treading if not correctly
arranged. The user shall make sure that electric cords shall be arranged
in a safe way.
• Always disconnect the appliance from the mains supply before cleaning
or performing maintenance and when the appliance is not in use.
• Examine the appliance frequently for signs of wear or damage. If the
appliance has been misused or does not work, contact an authorised
technical service centre before switching it on again.
• If the supply cord is damaged, take the whole appliance to an authorised
technical service centre for the replacement of the control unit, so as to
prevent all risks.
• If the appliance is used on an adjustable bed, check that the blanket and
cord do not become trapped or rucked, for example in hinges.
• This appliance is not intended for medical use in hospitals.
• DO NOT use if wet.
DO NOT INSERT PINS OR NEEDLES.
• When storing the appliance, allow it to cool down before folding.
MI003679_R75.indd 4MI003679_R75.indd 4 07/04/20 18:4507/04/20 18:45

5
EN
WARNING! DO NOT crease the appliance by placing items
on top of it during storage.
WARNING! For use, cleaning, maintenance and storage of
the appliance, please follow the instructions specified in the
corresponding chapters.
• DO NOT use the appliance with wet hands or damp feet.
• DO NOT pull the power cable or the appliance itself to remove the plug
from the socket.
• DO NOT pull or lift the appliance by the supply cord.
• DO NOT expose the appliance to humidity, to the effects of weather
(rain, sun, etc.) or to extreme temperatures.
• If the appliance is faulty or malfunctions, switch it off and do not tamper
with it. Contact an authorised technical service centre for any repairs.
• DO NOT use this appliance to warm animals.
• DO NOT tuck in.
• See the external packaging for the characteristics of the appliance.
USE
• Make up the bed as normal using a top and bottom sheet.
• Spread the overblanket over the top sheet with the blanket connector (1) facing
downwards at the foot of the bed [A].
• Ensure that the overblanket is lying at.
• Do not fold.
• Additional bed covers can be placed on top of the overblanket.
• You can also place the overblanket inside the duvet cover, then place the duvet on top
to keep the heat in. Ensure that the connector is at the bottom end of the duvet cover.
• If using the overblanket on a chair or sofa, place it over you to keep you warm and
cosy [D].
• You may wish to wrap the blanket around you, but do not wrap tightly or sit on the
overblanket as this may cause the overheat protection system to activate.
• The connector must be at foot of the overblanket.
CONNECTING THE CONTROL UNIT
• Insert the control unit connector (2) in the overblanket connector (1) to connect the
control unit to the overblanket.
MI003679_R75.indd 5MI003679_R75.indd 5 07/04/20 18:4507/04/20 18:45

6
EN
• Run the control unit cable along the oor next to the bed. Do not squash the control
unit cable between the mattress and the bed frame.
• Insert the plug of the control unit cable in the mains socket (3). Every time the plug is
inserted, the control unit automatically performs a self-diagnosis, lighting up all LEDs
(10, 11) in a clockwise sequence for around two seconds.
SWITCHING ON AND SELECTING THE RIGHT TEMPERATURE
The control unit can be set to the following temperature levels:
6: Fast pre-heat temperature
5-4: Medium pre-heat temperature
3-1: Continuous or all-night use
• To switch the overblanket on press the ON/OFF button (7). Every time the appliance is turned
on, the Auto Safety Function automatically runs a full check of your blanket, lighting up all the
LEDs (10, 11) in a clockwise sequence. Following this check, the control unit automatically
sets to temperature 6 and the auto shut o timer to 1 hour.
• For fast pre-heat, use maximum temperature 6. If you like a medium pre-heat temperature
then you can select 4-5 by pressing the temperature selector button (8) until the LED for
the required temperature lights up (11). The higher the number selected, the higher the
temperature.
IMPORTANT: The temperature of the overblanket must be evaluated by lying in the
bed rather than just feeling it by hand.
CONTINUOUS OR ALL NIGHT USE
For continuous or all night use of the appliance, set the control
unit to temperature settings from 1 to 3 only.
To set the control unit to the continuous use temperature, press the temperature selector button
(8) until LEDs 1, 2 or 3 light up (11).
DO NOT get into bed with the control unit set to a higher
temperature than recommended for continuous use.
If the appliance is slept on with the controls set to a higher
temperature the user may suer skin burns or heat stroke.
WARNING! DO NOT place the control unit under the pillow
or under the sheets when in use.
MI003679_R75.indd 6MI003679_R75.indd 6 07/04/20 18:4507/04/20 18:45

7
EN
AUTO SHUT OFF TIMER
The overblanket has an automatic shut o timer of 1, 3 or 9 hours.
When switched on, the control unit automatically sets itself to 1 hour on the auto
shut o timer and the LED 1h lights up green (10). To set a dierent auto shut o
timer, press the timer selector button (6) and select the desired timer.
Each time the auto shut o timer is reset, the timer starts from zero. When the time
has elapsed, the overblanket switches o and the standby LED (9) lights up blue.
NOTE: Should the power supply accidentally be interrupted during use, when
the control unit is switched back on, it will maintain the temperature and timer
settings in use previously and the timer counter will start from zero.
NOTE: So that the display light does not bother users during the night, the
light intensity reduces around 15 seconds after any button is last pressed.
Similarly, the standby LED becomes less bright 15 seconds after it is activated.
SWITCHING OFF
Switch the overblanket o by pressing the ON/OFF button (7) and remove the plug from the
socket (3) .
CLEANING AND MAINTENANCE
The overblanket is washable. Check the washing symbols on the label to ensure it is
washed correctly.
WARNING! Always disconnect the appliance from the mains
and disconnect the control connector from the overblanket
before cleaning or performing maintenance.
BEFORE WASHING
• Take the plug of the control unit cable out of the mains socket (3).
• Press the grip levers at the sides of the control unit connector (2) to remove the control
unit connector from the overblanket connector (1).
MACHINE WASHING
• The overblanket can be cleaned in the washing machine at 30°C, on a delicate cycle.
• Pre-treat any stains by spot cleaning before placing in the washing machine.
• Use only the delicate cycle for spinning. DO NOT make an additional spinning cycle.
DRYING IN THE TUMBLE DRYER
• The overblanket can be dried in a tumble dryer on a delicate cycle, but at the end of
the drying cycle it must be air-dried to allow it to dry completely.
MI003679_R75.indd 7MI003679_R75.indd 7 07/04/20 18:4507/04/20 18:45

8
EN
• Remove the overblanket from the tumble dryer at the end of the drying cycle and
reshape it to its original size.
• Allow the overblanket to fully air-dry before using it again.
DRYING IN THE OPEN AIR
• When the overblanket is spread out to dry on a clothes airer, it must be stretched so the
original size is more or less maintained. This is best done while the blanket is still damp,
working alternately on the opposite corners and pulling one side at a time.You might have
to repeat this procedure several times until the blanket is completely dry.
WARNING! Dry the appliance flat without using pegs to avoid
damaging it. Leave it to dry, laid out flat on a clothes airer, not
in direct sunlight.
• Only use the overblanket when it’s thoroughly dry.
• Do not iron the overblanket.
WARNING! Examine the appliance against the light to make sure
the cables are not bent or twisted.
WARNING! If the appliance does not resume its original size or if
problems arise with the internal cables contact an authorised service
centre for a safety check.
STORING THE OVERBLANKET
When not in use, store as follows:
• If the overblanket has been washed, wait until it’s completely dry;
• Fold it like a normal blanket;
• You are advised to store the overblanket in the original packaging it was supplied in;
• When storing the appliance, allow it to cool down before folding;
• Put the overblanket away in a dry place
The fabric may turn yellow over time. This does not have any effect at all on the safety and/or
effectiveness of the product itself.
Examine the appliance and its supply cord frequently for signs of wear or damage.
lf there are such signs or in the case of malfunction, contact an authorised technical
service centre.
MI003679_R75.indd 8MI003679_R75.indd 8 07/04/20 18:4507/04/20 18:45

9
EN
TROUBLESHOOTING
This chapter describes the most common problems that can arise using the
appliance. If the problems cannot be solved with the information below, please
contact the Authorised Service Centre.
Problem Solution
The LEDs on the control unit
do not light up.
Check that the control unit plug is fully inserted in
the socket (3). If the LEDs remain off, remove the
control unit plug from the socket (3) and return
the overblanket to an authorised technical service
centre.
The blue warning light is
flashing.
Turn the control unit off and remove the plug from
the socket (3). Check that the control unit connector
(2) is fully inserted in the overblanket connector (1)
and reinsert the plug in the socket (3). If the standby
LED continues to flash, return the overblanket to an
authorised technical service centre.
Temperature LED 1 (11) is
flashing.
Return the overblanket to an authorised technical
service centre to be checked.
The product has been used
incorrectly or is damaged.
The power cable or another
internal wire is damaged.
The control unit is damaged.
There are holes or tears in the
fabric or stubborn creases that
do not spread out.
DISPOSAL
The packaging of the appliance is made of recyclable materials. Dispose of the packaging in
accordance with the environmental protection regulations.
MI003679_R75.indd 9MI003679_R75.indd 9 07/04/20 18:4507/04/20 18:45

10
EN
Pursuant to Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), the
crossed bin symbol on the appliance or its packaging indicates that the appliance must be
disposed of separately from other waste at the end of its useful life.
The user must therefore take the appliance to an appropriate recycling centre for electrical
and electronic equipment. Alternatively, instead of handling the disposal, the user can hand over the
appliance to the retailer when a new, equivalent one is purchased. The user can hand over electronic
products measuring less than 25 cm to retailers of electronic products having a sales area of at least
400 m2 free of charge and with no obligation to buy. Proper waste sorting prior to sending the equipment
no longer used for recycling, processing and disposal in a manner that respects the environment
contributes towards avoiding negative impacts on the environment and on health and promotes the
reuse and/or recycling of the equipment’s material.
GUARANTEE
This product is guaranteed for a period of 2 years from the date of purchase against material, mechanical
and electrical defects. The guarantee is binding if it is accompanied by a valid receipt of payment.This
guarantee is only valid if the appliance is used solely for domestic purposes in accordance with the
instructions provided that is not connected to an unsuitable electricity supply, dismantled, interfered
with in any way damaged, through misuse, fair wear and tear. Under this guarantee we undertake to
repair or replace free of charge any parts found to be defective.
PLEASE NOTE, THE COST OF A SAFETY INSPECTION IS NOT COVERED BY THIS
GUARANTEE. A CHARGE WILL BE MADE IN RESPECT OF ANY PRODUCT RETURNED UNDER
THIS GUARANTEE, WHERE NO FAULT IS FOUND.
This guarantee is offered as an extra benefit and does not affect your statutory rights as a consumer.
This guarantee does not confer any rights other than those expressly set out above and in particular
we shall not be liable for any indirect or consequential loss or damage. Nothing in this guarantee or the
instructions relating to the product excludes, restricts or otherwise affects your statutory rights. In line
with our policy of continuous development, we reserve the right to change this product, packaging and
documentation without notice. If a defect appears and after checking that the blanket is being used
properly in accordance with the instructions, return it with a valid proof of purchase, as soon as possible
to the manufacturer’s Service Centre.This guarantee is valid in the UK only.
SERVICE CENTRE
PO Box 166 – Middlewich – Cheshire – CW10 0ZU - Tel: [phone]
E-mail: [email protected]
www.dreamlanduk.co.uk
MI003679_R75.indd 10MI003679_R75.indd 10 07/04/20 18:4507/04/20 18:45

MI003679
030420
MI003679_R75.indd 11MI003679_R75.indd 11 07/04/20 18:4507/04/20 18:45