Drive Medical 11114-2 Installation guide

© 2002 Medical Depot, Inc. All rights reserved.
Drive is a trademark of Medical Depot, Inc.
Port Washington NY, USA Made in China
Instructions & Warranty
Information
For use with Item #11114-2
Shower Chair
Your Drive brand product is warranted to be free
of defects in materials and workmanship for the
lifetime of the original consumer purchaser.
This device was built to exacting standards
and carefully inspected prior to shipment. This
Lifetime Limited Warranty is an expression of
our confidence in the materials and workman-
ship of our products and our assurance to the
consumer of years of dependable service.
In the event of a defect covered by this war-
ranty, we will, at our option, repair or replace
the device.
This warranty does not cover device failure
due to owner misuse or negligence, or normal
wear and tear. The warranty does not extend to
non-durable components,such as rubber acces-
sories, casters, and grips, which are subject to
normal wear and need periodic replacement.
If you have a question about your Drive device
or this warranty, please contact an authorized
Drive dealer.
PORT WASHINGTON, NY 11050
MADE IN CHINA
www.drivemedical.com
LIFETIME LIMITED
WARRANTY

ASSEMBLY INSTRUCTIONS
Attach back support by sliding mount-
ing tubes through aluminum extrusion
mounts and lock into place with spring
loaded push-pins.
Periodically check assembly for continued
tightness. NEVER USE BATH SAFETY SEAT
IF ANY LOOSENESS IN THE ASSEMBLY
IS NOTICED, AS PERSONAL INJURY MAY
RESULT. SIT, DO NOT STAND on the seat to
avoid a possible dangerous fall.
CAUTION: Maximum weight limitation
for this product not to exceed 300 lbs.
Meets ANSI Standard A117 1 specifications.
NOTE:To maintain the beauty of the original
finish, clean with mild soap and rinse with
warm water.Wipe bath seat dry after
each use.
Tool-Free Assembly
Aluminum
Extrusion
Mounts
Mounting
Tubes