Dromex DFA-PN21 User manual

FALL PROTECTION HARNESS
Description
The Dromex® DFA-PN21 full body harness with a permanently attached energy absorbing
double lanyard, is an essential and mandatory piece of safety equipment, when working at
heights as it protects a user from accidents and injury resulting from a fall.
This fall arrest system allows the user to safely move in all directions with the dual lanyard,
whilst remaining anchored at all times.
Features:
• High visibility yellow colour webbing.
• A double, Y shaped lanyard (PN361N) with steel scaffold hooks and an energy absorber
that is attached on the single Dorsal D-ring of the harness.
• Scaffolding hooks with a double lock spring-loaded locking and opening gate mechanism
for safe attachment/anchorage and preventing accidental opening.
• Adjustable chest, shoulder, waist and leg straps. An ideal choice for women as the
shoulder strap is height adjustable for comfort on the chest area.
• Ideally positioned sit strap and waist belt for extended comfort.
• Parachute Buckle (Male-Female) for ease of fastening the legs straps.
• 2 Webbed Lanyard Keeper loops on chest strap for holding lanyards hooks for placement
of free lanyards.
• An ID (impact distribution) plate to absorb load and is a visual indicator confirming that
the harness has been exposed to a fall or impact forces and should be removed from
service.
• An Impact Indicator on the shock absorber provides visual reference of a shock load or
fall arrest incident.
• The lanyard loops at the ends are protected by an abrasion resistant covering. This
prevents the webbing from being damaged by the metallic contact of the connector.
• A universal fit harness.
This harness system has a maximum rated load of 140Kg.
Suitable for use when working at heights in the construction (scaffolding, high rope access),
ship building, mining, warehousing and general maintenance industries (window cleaning,
painting).
Special Instructions
• Please retain your harness information booked enclosed in the packaging as it contains
your harness certification and inspection schedule, required for
re-certification and daily inspections.
You can also scan the QR code marked on your harness to obtain a copy of the
product certification.
• It is recommended that this harness system should be the personal property of its user and
care must be taken to ensure the safety of its user.
• It is essential to verify that the medical condition of the user is fit to use the product in
normal and emergency use.
• Ensure before and during use that a rescue plan is in place to rescue the user after a fall has
occurred.
• These energy absorbing lanyards when used as a component of a fall arrest system
guarantees the full ability for the safe arresting of a fall from a height by reducing the
breaking force measured at the anchorage point or the anchorage line to less than 6.0 kN.
It can be used in conjunction with a full body harness.
• Please do not add any lanyard/connector as it can increase the distance from fall arrester to
user connection point. This can lead to product failure and can cause serious injury. Users
must know how to use a harness with a fixed lanyard attachment.
• However users are advised to use the harness with utmost care and the total weight
(including all tools) must not be more than 140kg.
• The total length of a sub system with a lanyard including an energy absorber, terminations
and connectors shall not exceed 2m.
• The strength of the anchor device should be greater than 18kN (for Textile) and 12kN
(for Metal) and the anchor point should be situated above the user's head.
• Connect the lanyard to the anchorage point using the connector provided at one end.
(If a connector is not provided, use karabiners complying to EN 362:2004).
The other end on the side of the energy absorber should be connected to the attachment
element of the full body harness.
• To optimize protection, in some instances it may be necessary to use the lanyard with
suitable other components. In this case before carrying out the risk application related
activity, consult your supplier to ensure that all components are compatible and suitable for
your application.
• The arrest distance should be double the total length of the lanyard plus 1.75m break
distance to allow tearing of the webbing inside.
• Always remember that no item of PPE can provide full protection and care must always be
taken while carrying out the risk related activity.
• Only competent users who have received training should use this equipment. (Refer to the
SABS/EN recommendations concerning selection, use and maintenance.)
• The manufacturer’s instructions must be followed.
• Inspect the equipment before every use to ensure that it is in a serviceable condition and
operates correctly as intended.
• Inspect all the rope or webbing of product for cuts/abrasion marks. Also check all
connectors of the product for proper mechanical functioning and effects of corrosion or
mechanical deformation if any on parts of the connectors in the product.
• Since this lanyard is made of polymers and polyester, the performance of which gets
affected by temperatures, effect of sharp edges, electrical conductivity, chemical reagents,
cutting, abrasion, UV degradation etc, it is advised to consult your supplier for use in the
above extreme conditions
• Ensure that the harness or webbing does not come into contact with high temperature
surfaces, welding, heat sources, electrical hazards or moving machinery.
• If the harness has been involved in arresting a fall, it must be removed from service
immediately and destroyed. Withdraw from use the product for which any doubt arises
about it's condition for safe use
• No modifications or alterations must be made to the equipment, this will make the
warranty null and void. Any repair shall only be carried out in accordance with the
manufacturer's procedures.
• Specially designed harnesses with high heat webbing are available for specialized heat
applications.
• If the equipment is used in areas, or comes into contact with hazardous chemicals
e.g. cleaning materials or atmospheres that may cause damage to the product, contact the
manufacturer to see if it is still fit for use.
• If a lanyard is used in fall arrest system, it is essential for safety that the anchor device or
anchor point is always positioned, and the work carried out in such a way as to minimize
both the potential for falls and potential fall distance. Ensure that the anchor point is above
the user's head.
• If used within fall arrest systems, it is essential to verify the free space required beneath the
user at the work place before each occasion of use, so that in the case of a fall, there will be
no collision with the ground or other obstacles in the fall path.
• The equipment shall not be used outside its limitation, or for any purpose other than that
for which it is intended.
• The device should be used with appropriate combinations only. The user should not make
any combination which compromises safe function of any other devices used in
combination or entire fall protection system or rescue system.
• It should not be used in highly acidic or basic environments.
• Protect the equipment from mechanical hazards like sharp edges, tools, exposure to
sunlight, ultraviolet degradation both during usage, transportation and storage.
• None of the materials or processes used in the manufacture of these products are known
to be harmful to the wearer.
• The manufacturer has examined under the system for ensuring quality of production by
means of monitoring and inspection.
• Actual conditions of use cannot be directly simulated in a test environment therefore it is
the responsibility of the end user and not the manufacturer or supplier to determine the
harness suitability for the intended use.
Specifications
Style: High visibility, yellow, full body harness with
adjustable, shoulder, chest strap (45mm), waist and
leg straps and a fixed shock absorbing lanyard
with scaffold hooks
Material harness: 45mm Wide Polyester webbing
Stitching: High Tenacity Polyester
Metal components: High strength steel
Scaffold: High strength steel
Load capacity of harness: 140 kg (Including tools)
Weight: 2800 gm + 10 gm
Compliancy & Conformity
• The full body harness is classed as a Personal Protective Equipment (PPE) by the European
PPE Regulation (EU) 2016/425 and has been shown to comply with this Regulation through
the Harmonized European Standards:
• EN 361:2002 - Harnesses intended to hold the user in place and spread the
load in the case of a fall arrest scenario (i.e. being brought to a stop
following a period of free-fall).
• EN 355:2002 - intended for use in connecting the attachment point of a
full body harness to a suitable anchorage device.
The lanyard includes a shock absorbing element, intended to reduce the
force applied to the user by gradually arresting the fall.
Packaging, Storage & Obsolescence
DFA-PN21: Packed in an individual polybag and sold individually.
Store in a cool dry place, that is clean and ventilated and placed away from direct sunlight
and extremes of temperature.
Never place heavy items on top of it. If possible, avoid excessive folding and preferably
store it hanging vertically. If the product is wet, allow it to dry fully before placing it into
storage.
It is preferred that the product be transported in its original packing.
However, if not available, it may be stored in an air tight bag and transported.
Cleaning & Maintenance
As with any piece of equipment, harnesses require care, maintenance and storage to ensure
they function properly. In the case of a harness, any malfunction could have severe
consequences.
• The equipment must be inspected and its condition recorded by a competent
person before each use.
• The user’s company Safety Officer must maintain a record log of servicing and inspections
dates of the unit.
• Wipe harness clean with a cloth dipped in luke-warm water with mild detergent.
• For intensive cleaning wash the harness in water at a temperature not more than 40°C
using a neutral detergent (pH7).
• Do not use any abrasive material.
• Follow the washing instructions without any deviations.
• After cleaning and drying, store the equipment in a dry dark cool position.
• DO NOT STORE THE EQUIPMENT WET.
Dromex: Unit 1, 1 Blase Road, New Germany, 3620, South Africa
T. [phone] E. [email protected]
www.dromex.co.za Latest update: 13/06/2023
Disclaimer
Dromex reserves the right to make changes without further notice to any products herein to improve function, design or reliability
and validity. Dromex does not assume any liability arising out of the application or use of any product described herein.
Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
DFA-PN21
to be used only in vertical fall arrest systems
Unit 1, 1 Blasé Road, New Germany, South Africa, 3620
EN 360:2002
Made In India
QR
CODE
Batch no. : XXXX
Serial no.:XXXX
(QR code)

In order to maximise the harness life cycle, we recommend the mildest possible cleaning
conditions in terms of temperature, chemicals and cycle duration.
Due to a wide variety of possible constructions and combinations with other materials we
recommend to always consult your professional cleaning service to determine the best
suitable cleaning method.
Shelf life
All soft goods, including harness, can be used for ten years from the date of first use as long
as they are examined by a qualified individual who has been trained by the manufacturer
in accordance with EN365 requirements. After ten years OR if it doesn't pass the competent
person examination, the product must be taken out of service.’
Ensure product storage guidelines are followed.
The following factors can reduce the Lifespan of the product; intense use, contact with
chemical substances, especially aggressive environment, extreme temperature exposure,
UV exposure, abrasion, cuts, violent impacts, bad use, or maintenance.
Remove and replace once the energy absorber has been deployed.
Sizes Available
Standard - Universal.
Instructions to be followed before use
• It is important to carry out a pre use check of the equipment to ensure that it is in a
serviceable condition.
• Inspect the harness and the lanyard for any rupture of webbing, rope, seams, buckles,
D-ring etc. Do not use in case of any rupture or defectiveness.
• In case of any doubt arising about the condition of any component or system, replace it
immediately. If the harness has arrested a fall, or if the impact/load indicator has
accidently been deployed during handling, withdraw it from service & return to the
manufacturer or a competent repair center.
• It is essential to ensure that there is a minimum clearance of 6m beneath the user at the
work place before each occasion of use, so that in case of a fall, there will be no collision
with the ground. Also, ensure that no obstacle exists beneath the user at his workplace
so that he does not collide with any, in case of a fall.
• Prior to use of the harness the user should carry out a suspension test in a safe place to
ensure that the harness is the correct size, has sufficient adjustment, and is of an
acceptable comfort level for the intended use.
• Apart from Fall Arrest this harness can be used for specific situations in conjunction with
Fall Arrestors where the front attachment is needed.
• Both leg straps, chest strap, shoulder strap and waist belt are adjustable to fit the size of
the user.
• A harness that is either too loose or too tight will restrict movement and will not provide
the optimum level of protection.
• The size of the harness is marked on a label attached to it and it is universal.
Putting on the Harness
Drawing
Dromex: Unit 1, 1 Blase Road, New Germany, 3620, South Africa
T. [phone] E. [email protected]
www.dromex.co.za Latest update: 13/06/2023
Disclaimer
Dromex reserves the right to make changes without further notice to any products herein to improve function, design or reliability
and validity. Dromex does not assume any liability arising out of the application or use of any product described herein.
Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
minimum ground clearance from anchorage point : 6m
2 m (max) 1.2 m (max) Break distance 1.8 m body 1.0 m safety distance
Ground Clearance
minimum ground clearance from anchorage point : 6.0 m
2.0 m (max) 1.0 m safety distance
1.8 m body
1.2 m (max) Break distance
Type : DFA-PN21
Mfg. mm/yy : XX/XXXX
Batch no. : XXXX
Serial no. : XXXX
Material : Polyester
Length : 1.75 m
to be used only in vertical fall arrest systems
Unit 1, 1 Blasé Road, New Germany, South Africa, 3620
EN 360:2002
Made In India
QR
CODE
Batch no. : XXXX
Serial no.:XXXX
Type :
Mfg. mm/yy : XX/XXXX
Batch no. : XXXXX
Serial no. : XXXX
Material : Polyester
Size : Universal
Made In India
DFA-PN21
EN 361:2002
Max. Rated Load
(Including all tools)
Unit 1, 1 Blasé Road, New
Germany, South Africa, 3620
full body harness
(ii)
(iii)
(i)
(iv)
(v)
(vi)
(vii)
(viii)
(x)
(i) (x)
(ii)
(iii)
(iv) (v)
(vi)(vii)
(viii)
Marking on Product
The Energy Absorbing Lanyard is marked with:
(i) The CE mark showing that the product meets the requirement of the European PPE
Regulation (EU) 2016/425
(ii) Identification of the manufacture and address
(iii) Type of product code
(iv) Month & Year of Manufacture
(v) Batch/Lot Number
(vi) Serial Number
(vii) Material
(viii) Length
(x) Norm
Disposal
Industrial harnesses should be disposed of considering the hazardous substance they were
used for, if damaged and once the shock absorber has been deployed.
Please consider recycling.
Steps for safe Disposal:
•Segregate the equipment in three different crates for placing components
in them respectively such as - Textile, Metal and Plastic.
•Inspect the wear and tear present on the harness and lanyard by holding
the harness on the D ring
•Using a sharp pair of scissors to cut the Textile and dismantle the harness
& lanyard.
•Thereafter remove the metal & plastic components separately from the
harness & lanyard.
•Put the Textile, Plastic & Metal components in their respective plastic crates.
•Once segregation done, arrange to send them for recycling or
disposal (as appropriate) through authorized agencies as per local or
national.
Marking
Energy absorber
Lanyard
keepers
Adjustable leg
straps with
buckles
Dorsal D ring
Steel scaffold
hook
Yellow
webbing
harness
Sit strap
Impact
distribution
plate
Adjustable
shoulder straps
with buckles
Waist belt
NOTE: Chest, shoulder, leg straps and waist belt are all feature metal parachute buckles and
plastic keepers.
Adjustable
chest straps
with buckles
NOTE: After putting on the harness, user should carry out a comfort and adjustability test in a
safe place by sitting & bending forward to ensure that the harness is in the correct size and
and has sufficient adjustment and is of an acceptable comfort level for the intended use.
To locate the anchor point on the harness, check for the “A” marking near them.
Periodic Examination
• This product needs to be periodically examined because the safety of the user depends
upon the continued efficiency and durability of the lanyard.
• It is important to examine it at least once in every 12 months.
• Periodic examination is to be conducted by a competent person and strictly in accordance
with the manufacturer's periodic examination procedures.
• Periodic examination also requires checking the legibility of the product markings
• Always retain a copy of the Harness Equipment Perodic Examination and Repair History
checklists.
Step 1 Step 2 Step 3 Step 4
Step 5 Step 6 Step 7 Step 8
Untangle the
harness by
holding it from
the dorsal D-ring.
Insert your arms one by one into the shoulder
straps.
Close the buckle
on the chest strap.
Pull the leg straps
one by one around
your thigh outwards
to your front.
To check & adjust all the straps of the harness to your body adjustment, refer
to Step 6 to Step 8.