DSI PD72 User manual

4/4
STEP-BY-STEP ASSEMBLY (continued):
STEP 5: Insert the boundary rails into the holes on the top of the
platform. The longer rails go on the outside (longer side) of the
podium and the smaller rails go on the ends (smaller side) of the
podium (see the image below for placement).
5
STEP 6: Attach the adhesive tread tape to the ladder steps of the
podium.
6
For assistance with assembly, please contact
Director’s Showcase International Customer Care Center
1-800-893-8171
DSHOWCASE.COM
ITEM NAME: 6’ Command Center Podium
ITEM SKU: PD72 / PD72B
For assistance with assembly, please contact
Director’s Showcase International Customer Care Center
1-800-893-8171
1/4

2/4
aximum load: 550 lb
aximum load: 550 lb
aximum load: 550 lbaximum load: 550 lbaximum load: 550 lb
aximum o
aximum o
aximum oaximum oaximum o
THIS PACKAGE MAY CONTAIN SMALL ITEMS WHICH SHOULD BE KEPT AWAY FROM CHILDREN
T
T
w
w
TwT
TwT
o 1/2
o 1/2
”
w
w
”w”
r
r
enches/sockets (
enches/sockets (
f
f
or 5/16
or 5/16
for 5/16f
for 5/16f
”
nuts and bolts)
nuts and bolts)
”nuts and bolts)”
TOOLS NEEDED:
The following additional tools are required for assembly (not included):
• Two 1/2” wrenches/sockets (for 5/16”nuts and bolts)
IMPORTANT PRODUCT INFORMATION:
Maximum load: 550 lbs.
Maximum occupancy: 3 people
NOTE: The podium may be moved while in the upright position for distances of less than 50 feet.
However, it should be pulled, not pushed, at a normal walking pace. If the podium needs to be
moved more than 50 feet, it should be done in the collapsed position.
• 6’ Command Center Podium [ qty: 1 ]
• Boundary Rail - Large [ qty: 2 ]
• Boundary Rail - Small [ qty: 2 ]
• Wheel bracket assembly - Left [ qty: 1 ]
• Wheel bracket assembly - Right [ qty: 1 ]
• 5/16” x 3” Hex Head Bolt [ qty: 4 ]
• 7/8” O.D. Flat Washer [ qty: 4 ]
• 5/16” Nylon Insert Lock Nut [ qty: 4 ]
• Adhesive Tread Tape [ qty: 10 ]
B
ounda
ounda
R
ail - La
ail - La
ge [ q
: 2 ]
ITEMS INCLUDED IN THE BOX:
DSHOWCASE.COM
3/4
DSHOWCASE.COM
1
1
STEP-BY-STEP ASSEMBLY:
STEP 1: With the podium in the collapsed position, tip the podium
onto its side by lifting one of the longer sides of the platform up 90
degrees so the podium legs can swing out from under the platform.
1
STEP 2: Pull the podium legs out until the
hinges are completely straight and insert the
steel pins into the holes in the hinge. Repeat
this process for all four hinges (see photo on
the right).
2
STEP 3: Stand the podium upright (two adults
are recommended for this step).
4
4
4
4
3
STEP 4: Attach the wheel bracket assembly to the podium using
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
r
r
ig
ig
ig
ig
h
h
h
h
h
h
t be
t be
t be
t be
t be
t be
t be
t be
t be
t be
t be
f
f
f
o
r
r
r
r
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
r
r
e put on.
e put on.
e put on.
e put on.
e put on.
e put on.
e put on.
e put on.
e put on.
e put on.
e put on.
e put on.
e put on.
e put on.
e put on.
e put on.
T
T
ig
ig
h
h
t
t
en
en
en
en
en
en
nylon insert lock nuts. The bolts should be inserted though the
against the inside of the upright before the nuts are put on. Tighten
the entire assembly securely (see photos below).
4
DSHOWCASE.COM

2/4
aximum load: 550 lb
aximum load: 550 lb
aximum load: 550 lbaximum load: 550 lbaximum load: 550 lb
aximum o
aximum o
aximum oaximum oaximum o
THIS PACKAGE MAY CONTAIN SMALL ITEMS WHICH SHOULD BE KEPT AWAY FROM CHILDREN
T
T
w
w
TwT
TwT
o 1/2
o 1/2
”
w
w
”w”
r
r
enches/sockets (
enches/sockets (
f
f
or 5/16
or 5/16
for 5/16f
for 5/16f
”
nuts and bolts)
nuts and bolts)
”nuts and bolts)”
TOOLS NEEDED:
The following additional tools are required for assembly (not included):
• Two 1/2” wrenches/sockets (for 5/16”nuts and bolts)
IMPORTANT PRODUCT INFORMATION:
Maximum load: 550 lbs.
Maximum occupancy: 3 people
NOTE: The podium may be moved while in the upright position for distances of less than 50 feet.
However, it should be pulled, not pushed, at a normal walking pace. If the podium needs to be
moved more than 50 feet, it should be done in the collapsed position.
• 6’ Command Center Podium [ qty: 1 ]
• Boundary Rail - Large [ qty: 2 ]
• Boundary Rail - Small [ qty: 2 ]
• Wheel bracket assembly - Left [ qty: 1 ]
• Wheel bracket assembly - Right [ qty: 1 ]
• 5/16” x 3” Hex Head Bolt [ qty: 4 ]
• 7/8” O.D. Flat Washer [ qty: 4 ]
• 5/16” Nylon Insert Lock Nut [ qty: 4 ]
• Adhesive Tread Tape [ qty: 10 ]
B
ounda
ounda
R
ail - La
ail - La
ge [ q
: 2 ]
ITEMS INCLUDED IN THE BOX:
DSHOWCASE.COM
3/4
DSHOWCASE.COM
1
1
STEP-BY-STEP ASSEMBLY:
STEP 1: With the podium in the collapsed position, tip the podium
onto its side by lifting one of the longer sides of the platform up 90
degrees so the podium legs can swing out from under the platform.
1
STEP 2: Pull the podium legs out until the
hinges are completely straight and insert the
steel pins into the holes in the hinge. Repeat
this process for all four hinges (see photo on
the right).
2
STEP 3: Stand the podium upright (two adults
are recommended for this step).
4
4
4
4
3
STEP 4: Attach the wheel bracket assembly to the podium using
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
against the inside of the up
r
r
ig
ig
ig
ig
h
h
h
h
h
h
t be
t be
t be
t be
t be
t be
t be
t be
t be
t be
t be
f
f
f
o
r
r
r
r
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
e the nuts a
r
r
e put on.
e put on.
e put on.
e put on.
e put on.
e put on.
e put on.
e put on.
e put on.
e put on.
e put on.
e put on.
e put on.
e put on.
e put on.
e put on.
T
T
ig
ig
h
h
t
t
en
en
en
en
en
en
nylon insert lock nuts. The bolts should be inserted though the
against the inside of the upright before the nuts are put on. Tighten
the entire assembly securely (see photos below).
4
DSHOWCASE.COM

4/4
STEP-BY-STEP ASSEMBLY (continued):
STEP 5: Insert the boundary rails into the holes on the top of the
platform. The longer rails go on the outside (longer side) of the
podium and the smaller rails go on the ends (smaller side) of the
podium (see the image below for placement).
5
STEP 6: Attach the adhesive tread tape to the ladder steps of the
podium.
6
For assistance with assembly, please contact
Director’s Showcase International Customer Care Center
1-800-893-8171
DSHOWCASE.COM
ITEM NAME: 6’ Command Center Podium
ITEM SKU: PD72 / PD72B
For assistance with assembly, please contact
Director’s Showcase International Customer Care Center
1-800-893-8171
1/4