DStv Drifta USB User manual

Fold
Fold
Fold
Fold
Fold
Page 1
Quick Guide v1.1
Mobile Decoder
4
5
3
2
1
USB Cable
Quick Guide Application CD
Front Back
Quick Guide v1.0
Mobile Decoder
The Drifta USB Mobile Decoder
Included with the Drifta USB device are a USB cable,
application CD and this quick guide.
1. Antenna for receiving the DVB-H signal. This can be
extended and positioned vertically to improve
signal reception.
2. DVB-H signal light indicates the status of DVB-H
reception:
3. Device Serial Number
4. CAS Number is used in conjunction with the Device
Serial Number when activating the device.
5. The USB cable allows you to extend the USB
connection.
Introduction
Welcome to the exciting world of DStv Mobile. With
your Drifta USB Mobile Decoder, you will be able to
connect to DVB-H broadcast mobile TV and have
access to DStv Mobile content live on your PC or
Mac.
This guide will help you connect the Drifta USB to
your PC or Mac so you can start watching right
away.
Connecting to a Windows PC
Requirements
• Operating System: Windows XP, Vista, 7, or 8 Desktop
• Processor: 32 or 64 Bit
• Minimum Memory: 512MB
• Minimum Disk Space: 100 MB
• Ports: USB Port
Installing the Application
Important: Do not connect the Drifta to the computer
before installing the application.
1. Insert the Drifta application CD and run the Windows
setup application.
2. Follow the steps and complete the installation.
Connecting to an Apple Mac
Requirements
• Mac OS X 10.6.8 or higher
• Minimum Processor: Intel Core 2 Duo
• Minimum Memory: 1 GB
• Minimum Disk Space: 100 MB
• Ports: USB Port
Installing the Application
Download the application from the Mac App store by
doing the following:
1. Using the App Store application on the Mac, search
for “Drifta”.
2. A free application from MultiChoice called“Drifta”
will appear in the search results.
3. Install this application.
Signal Light Indications
STATUS
GREEN FAST FLICKERING
GREEN SLOW FLICKERING
GREEN STEADY
ORANGE STEADY
RED STEADY
DESCRIPTION
BOOTING UP
SEARCHING FOR SIGNAL
READY TO CONNECT
FAILED TO FIND SIGNAL
ERROR NEEDS RESETTING

Fold Fold
Fold
Fold
Fold
Fold
Page 2
Windows is a registered trademark of Microsoft Corporation.
Apple Macintosh is registered trademark of Apple Inc.
* South Africa only. Term & conditions apply
The Drifta USB Mobile Decoder
Included with the Drifta USB device are a USB cable,
application CD and this quick guide.
1. Antenna for receiving the DVB-H signal. This can be
extended and positioned vertically to improve
signal reception.
2. DVB-H signal light indicates the status of DVB-H
reception:
3. Device Serial Number
4. CAS Number is used in conjunction with the Device
Serial Number when activating the device.
5. The USB cable allows you to extend the USB
connection.
Introduction
Welcome to the exciting world of DStv Mobile. With
your Drifta USB Mobile Decoder, you will be able to
connect to DVB-H broadcast mobile TV and have
access to DStv Mobile content live on your PC or
Mac.
This guide will help you connect the Drifta USB to
your PC or Mac so you can start watching right
away.
Activating on DStv Mobile
STEP 1. Turn the device on, by pressing and
holding the Power Button.
STEP 2. With the device powered on call
the relevant MultiChoice customer
care number:
South Africa: [phone]
Ghana: [phone]
Kenya: [phone]
Namibia: [phone]
Nigeria: [phone]
STEP 3. Provide the customer service
representative with your serial
and CAS numbers found on the
bottom of your drta.
Activating on GOtv Mobile
Activate your Walka on the Gotv Mobile service by
SMSing 'ACTM', the device CAS number (found on
the bottom of the device) and your mobile phone
number to the number specic to your country.
Nigeria: 4688
Ghana: 4688
Kenya: 4688
Namibia: 44688
For example,
ACTM 4111111111 0831112223
(CAS No.) (Mobile No.)
Using the Application
1. Press and hold the power button on the Drifta
until it turns on. Wait for the DVB-H light to go
steady green. This may take up to 3 minutes
when using the Drifta for the rst time.
2. Connect the Drifta to your computer with a
USB cable or via Wi-Fi.
3. Launch the Drifta application on
your computer.
4. If required, the application will perform a
rmware upgrade or scan for available
channels.
5. Click a channel logo to watch the channel.
6. Click a channel line-up to view the channel
schedule.
More Information
For more information, updated applications and
additional Drifta USB client software, please visit
www.dstvmobile.com or www.gotvafrica.com
To participate in our DStv Mobile
audience measurement program
visit www.panel.dstvmobile.com
or scan this QR code on
your Smartphone.