Dualit XL1500 Technical specifications

XL1500 Food Processor
Instruction anual & Guarantee
DON’T FORGET TO REGISTER
YOUR FOOD PROCESSOR
WWW.DUALIT.COM/REGISTER
OR BY POST

32
SAFETY PRECAUTIONS









Always follow these safety precautions
when using your food processor, for your
own safety and to avoid damaging the
processor.
• ##$$!!
Do not leave appliance unattended during
use. Always disconnect the appliance from
the supply if it is left unattended and
before assembling, disassembling or
cleaning.
• This appliance must  $ be used by
children and people with very extensive
and complex disabilities. People with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge shall  $ use this appliance,
unless they are supervised and have been
given instruction concerning the use of
the appliance in a safe way and
understand the hazards involved. Children
shall  $ play with the appliance. Cleaning
and user maintenance shall  $ be made
by children.
• Keep the appliance and its cord out of
reach of children.
• This appliance is intended for indoor
household use only. If the appliance is used
improperly or for professional or semi-
professional purposes or if it is not used
according to these instructions the
guarantee becomes invalid and Dualit
refuses any liability for damage caused.
$"#$%
• ake sure the electrical outlet is rated at
the same voltage as that stated on the
bottom of the power base.
• Use this product with rated voltage A.C.
outlet only.
• Unplug the unit when not in use, before
fitting or removing parts and before
cleaning. To unplug it, hold the plug and
pull it out of the socket. Never pull it out
by the power cord.
• If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
• NOTE: Any plug cut from its power
supply cord should be disposed of
immediately. Inserting any cut-off plug into
an electrical socket is dangerous.
• For model DFP2 only: This appliance
must be earthed.
• NOTE: any plug cut from the power
supply cord should be disposed of
immediately. Inserting any cut off plug into
a 13A socket-outlet is hazardous.
CONTENTS
Safety precautions
Know your food processor
Processing bowls & lid
Blades & spindle
Grating & shredding disc
Variable slicing & julienne disc
E-disc & dough blade
Spatula
Continuous processing
Pulse & Auto Pulsing
Processing tips
Cleaning & maintenance
Storing your food processer
Troubleshooting
aximum loading chart
Guarantee
3
6
8
9
10
11
12
13
14
15
16
18
19
20
21
22
Unpack the box with care, keeping all the packaging materials until you are satisfied
everything is present and in working order. Once satisfied remove any tags from the
appliance and recycle the packaging appropriately. Do not remove tags from the cord
where appropriate. You may wish to keep the box to store your appliance.
All illustrations are for representation only, your model may have a different appearance from illustrations shown.

54

When you turn the blender on for the first
time, a “new” smell may be given off, this
will dissipate after a few uses.
Clean all parts in contact with food before
using for the first time.


In the interest of improving products,
Dualit Ltd. reserves the right to change the
product specification without prior notice.
INSTRUCTIONS ON ENVIRON ENT
PROTECTION
Do not dispose this product in the
usual household garbage at the end
of its life cycle. Please hand it over
to a collection point for the
recycling of electrical and electronic
appliances. The symbol on the product, the
instruction of use or the packaging will
inform you about the methods of disposal.
The materials are recyclable as mentioned
on its marking. By recycling, material
recycling or other forms of re-utilization of
old appliances you are making an important
contribution to protect our environment.
Please enquire at the community
administration for the authorised disposal
location.
• Ensure that the processor, the toolbox,
blades, discs and all accessories are always
kept in a safe location.
• When moving the processor, use both
hands and lift holding the base unit. Never
lift the processor using the bowl handle.
• Do not misuse the processor; it is
designed for use with food items only.
• Do not add boiling liquids or foods to
the bowls. Always cool liquids or food
items to below 60°C before adding to
the bowls.
• Bowls and attachments are not suitable
for microwave use.
• Do not overfill the bowls; ingredients
need room to move around. Use the
maximum loading chart on page 21 for
reference.
• Turn the power off via the control knob
and unplug before opening the lid.
• Switch off the appliance and disconnect
from supply before changing accessories
or approaching moving parts while in use.
• Never remove the bowl or lid until the
blades or discs have come to a complete
stop.
• Do not submerge the motor housing,
cord or plug in water or any other liquids.
• Clean all parts after each use; please
refer to the cleaning instructions on page
18.
• If your ingredients include raw meat,
make sure the bowls and attachments are
cleaned thoroughly, immediately after use.
• When using a dishwasher, always set it
to the lowest setting (max 40ºC) and
keep bowls and accessories well away
from the heating elements. Avoid the
drying cycle.
• Never use the plug without the fuse
cover fitted. Ensure replacement fuse is
the same current value as the original.
Replacement fuses are available and
should be ASTA approved to BS1362.
• Do not operate the appliance with a
damaged cord or plug or after appliance
malfunctions, or is dropped o r damaged
in any manner. Return appliance to the
nearest Authorized Service Centre for
examination, repair or ele ctrical or
mechanical adjustment.
• To protect against risk of electrical shock,
do not submerge the motor housing,
cord or plug in water or any other liquids.
• Do not let cord hang over edge of table
or counter.
• ake sure the cord or plug isn’t in
contact with anything hot or wet.
• This appliance features an overheat
cut-out that cuts the power if it becomes
too hot for any reason. If this occurs turn
the control knob to the OFF position.
Once it cools down, the safety cut-out
will automatically reset itself within one
hour and the power will be restored.
"#$%
• This appliance should only be operated
in a dry well ventilated area.
• Never tamper with the safety systems.
They are included for your personal
safety.
• Do not operate the appliance empty.
• For safety reasons keep hands and
utensils out of bowl while processing to
reduce the risk of severe injury to persons
or damage to the appliance. A spatula
may be used but must be used only when
the appliance is not running and the bowl
is detached from the base.
• The blades and discs are extremely
sharp; take extra care when handling these
parts, especially when removing from the
bowl, emptying the bowl and during
cleaning. Avoid touching the sharp edges.
• Avoid contact with moving parts, never
reach into the bowl with your fingers or
an object (e.g. a spatula) while the
appliance is running.
• Ensure the bowl(s), accessory(s), lid and
food pusher are all securely in place
before turning the processor on. It will
not work without the large bowl and lid
in place and locked.
• Only use the food pusher supplied to
insert and push ingredients down the
feeder tube. Never use your fingers or
utensils; this could cause severe injury and
also damage the appliance.
• The use of attachments not
recommended or sold by Dualit may
cause fire, electric shock or injury to the
user or the appliance.
• Use the spatula only when the unit is
turned off, the blade or discs are
removed and the processor is unplugged.
• Be certain the bowl is firmly located on
the base and the lid and blade/disc
assembly are correctly in position before
operating appliance.
• If the blade is jammed, switch off and
unplug the appliance before removing the
lid.
• Always operate appliance with lid in
place, spillage may occur if the lid is
damaged or incorrectly fitted.
• Caution, after extended periods of use
the metal drive coupling on the blade
assembly may become hot.
• Do not use the processor on a sloping
surface.

76
LID WITH
FEED TUBE
Easy to assemble and clean.
FOOD PUSHER
Features easy to read
measurement markings.
'%&%$
A precision sharp slicing
blade, height adjustable for
different thickness slicing.
%
Will emulsify liquids and
whisk egg whites in
seconds.
WORK BOWL
WITH SEALED DRIVE
Features the largest working
capacity.
$&!%(!%
Ideal for grating hard cheeses
and shaving chocolate.
$!%
Can shred most vegetables
into fine food.
#&'
For quick and easy removal of
ingredients.
'!!%
Quick preparation for
stir-fry’s and salads.
"##!%
Chops, minces, blends and
mixes in a matter of seconds.
' ")
Use this as a secondary
bowl. This is also the best
bowl when using slightly
smaller quantities.
$")
Use this bowl for all liquids
(it has a sealed drive). It
offers the maximum
working capacity.
 ")
Perfect for everyday
processing tasks like chopping
herbs or puréeing baby food.
The small bowl must sit inside
the medium bowl.
CONTROLS
ain On/Off, Start/Stop, Pulse
and Auto Pulse
HANDLE
GRIPS
SUCKER FEET
"'
Perfect for making bread
dough and pastries.
#!
Use on the bowl drive to
attach accessories.
KNOW YOUR FOOD PROCESSOR
%&&"""*"$%&"$! "%&"&%%"$%
POWER
INDICATOR LIGHT
STAY FRESH LID
CORD
STORAGE
DON’T FORGET TO REGISTER
YOUR FOOD PROCESSOR
WWW.DUALIT. COM/REGISTER
OR BY POST

1st
2nd
3rd
1st
2nd
1st
2nd
1st
2nd
3rd
1st
2nd
3rd
1st
2nd
1st
2nd
1st
2nd
3rd
CLICK
LOCK
CLICK
LOCK
98
BLADES & SPINDLE
Allow
processer to cool if you go over the max run time. 
PROCESSING BOWLS & LID
You will always need to use the large bowl first, no matter what other bowls and
attachments you wish to use.
Before you assemble the food
processor, ensure that the
power cord is unplugged, and
placed facing you on a dry,
level surface. Push down on
the body to secure firmly.
CLICK
LOCK
Place the large bowl onto
the main body, with the
handle pointing to the right
(four o’clock).
Hold the handle and turn it
clockwise until you hear and
feel it lock in to place.
123
POSITION BODY LARGE BOWL LOCK LARGE BOWL
CLICK
LOCK
1ADDITIONAL
BOWLS
When using the medium
bowl, insert this into the
large bowl. When using the
small bowl insert this into
the medium bowl.
Small bowl must be used
with the medium bowl.
CLICK
LOCK
2ALIGN BOWLS
The medium bowl will
self-locate into the large
bowl. The groove on the
small bowl must allign with
the pip on the medium
bowl.
CLICK
LOCK
3ATTACH LID &
LOCK INTO PLACE
To attach the lid, place it on
the large bowl aligning to
the slots on the bowl rim. To
lock, hold the large bowl
handle, and with your other
hand, hold the base of the feed
tube and rotate clockwise.
Handle blades and attachment
using only the central plastic
section. The large chopping
blade locates directly onto
the bowl drive, once the large
bowl is locked in place.
1st
2nd
3rd
1st
2nd
1st
2nd
1st
2nd
3rd
The medium chopping blade
also locates directly onto the
bowl drive, once both large
and medium bowls are in
place.
The small chopping blade
needs to be used with the
spindle. This must be
attached to the bowl drive
once the large and medium
bowls are in place, and before
locating the small bowl.
123
LARGE BLADE EDIU BLADE S ALL BLADE
1st
2nd
3rd
1st
2nd
1st
2nd
1st
2nd
3rd
1SPINDLE IN
LARGE BOWL
The spindle locates on to
the bowl drive on the large
processing bowl.
1st
2nd
3rd
1st
2nd
1st
2nd
1st
2nd
3rd
2SPINDLE IN
EDIU BOWL
When using the medium
bowl, place it in the large
bowl then the spindle on the
bowl drive.
1st
2nd
3rd
1st
2nd
1st
2nd
1st
2nd
3rd
3SPINDLE IN
S ALL BOWL
When using the small bowl
with blade, place in the large
bowl with medium bowl,
spindle in position, then place
the small bowl and small blade
on the spindle.

11
OR
OR
10
GRATING & SHREDDING DISC
Allow
processer to cool if you go over the max run time. 
Select the fine or coarse side
of the grating/shaving disc to
suit your requirement.
NOTE: Very sharp. Hold
plastic hub to avoid injury.
OR
Place the reversible grating
disc on the spindle and push
down firmly to locate.
Place the spindle and grating
disc assembly onto the bowl
drive of large processing
bowl.
123
SELECT GRATE LOCK ON SPINDLE LOCATE ON BOWL
OR
3LOCATE ON BOWL
Place the spindle and
shredding disc assembly onto
the bowl drive of large
processing bowl.
OR
1SELECT SHRED
Select the fine or coarse side
of the shredding disc to suit
your requirement.
NOTE: Very sharp. Hold
plastic hub to avoid injury.
OR
2LOCK ON SPINDLE
Place the reversible
shredding disc on the spindle
and push down firmly to
locate.
VARIABLE SLICING & JULIENNE DISC
 
To adjust the slicing thickness,
rotate the outer spindle
anti-clockwise to make slices
thicker, or clockwise to make
thinner slices. NOTE: Very sharp.
Hold plastic to avoid injury.
OR
Fit the slicing disc over the
spindle and press firmly into
place.
The adjustable slicing disc
can only be used with the
large and medium bowls.
It creates any slice thickness
between 0.5mm and 7.5mm.
123
SLICE THICKNESS LOCK ON SPINDLE FOR LARGE &
EDIU BOWLS
3FOR LARGE &
EDIU BOWLS
The julienne disc can only be
used with the large and
medium bowls.
1CORRECT WAY UP
The julienne disc must be
inserted with the cutting face
upwards.
NOTE: Very sharp. Hold
plastic hub to avoid injury.
2LOCK ON SPINDLE
Fit the julienne disc over the
spindle and press firmly into
place.

12
Attach the spindle onto the
centre of the E-disc. Push
down until you hear and feel
it lock into place.
Place the E-disc assembly
directly onto the bowl drive
in the large bowl.
To emulsify liquids
successfully, add additional
liquids slowly through the
feeder tube.
123
SETUP THE E-DISC LOCATE E-DISC ADDING LIQUIDS
1LOCATE DOUGH
BLADE
The dough blade can only
be used with the large bowl.
Place the dough blade
directly onto the bowl drive
in the large bowl.
2ADDING DRY
INGREDIENTS
Liquids can be added slowly
through the feeder tube.
3ADDING LIQUIDS
Add dry ingredients before
adding any liquids.
NOTE: DO NOT USE DISCS
FOR LONGER THAN 45
SECONDS AT A TI E.
Allow processer to cool if you
go over the max run time.
E-DISC & DOUGH BLADE
The E-disc can only be used with the large bowl,
and only with liquids (including cream, egg whites and dressing).
13
SPATULA
Always turn off the power
by pressing START/STOP
button  the AIN
POWER button, finally,
unplug the processor before
using the spatula.
123
TURN OFF RE OVE BLADES USE SPATULA
Use the spatula to
redistribute ingredients that
have built up around the
sides of the bowls, or to
help decant ingredients from
bowls to other containers.
Be careful not to touch the
cutting blades with your
hands when you use the
spatula to scrape the inside
of the bowl.

1514
PULSE & AUTO PULSING
ONLY USE THESE FEATURES WITH THE CHOPPING BLADES AND DOUGH BLADE.
The Pulse and Auto Pulse feature is perfect for mixing in foods without puréeing the mixture.
Turn the main power ‘ON’.
Press the ‘PULSE’ button to
start processing. The blade
will only rotate when the
PULSE button is pressed.
12
SET UP PROCESSOR PUSH TO PULSE
1TURN ON
For auto pulsing, prepare
the food processor as if
continuous processing.
Turn the main power ‘ON’.
2AUTO PULSE
Press the ‘AUTO PULSE’
button to start processing.
The blade will automaticaly
pulse 10 times. To stop mid
cycle press ‘START/STOP’
button.
3TO CANCEL
To stop mid cycle press
‘START/STOP’ button.
Set up the processor with the
appropriate attachments.
NOTE: DO NOT USE
BLADES FOR LONGER
THAN 45 SECONDS AT A
TI E.Allow processer to cool if
you go over the max run time.
Cut large items in to evenly
sized 2cm chunks. Add food
items to be chopped and
lock the lid.
Plug in the power cord and
turn the main power 'ON'.
The power light will
illuminate.
123
SETUP PROCESSOR ADD PRE CUT FOOD AIN POWER ON
4START PROCESSING
Using the START/STOP
button on the control panel,
press once to start
processing.
5FEEDING TUBE
Feed items gently through
the feed tube using the food
pusher. Let the disc do the
work. Exerting too much
pressure will damage your
machine. 

6TURNING OFF
Press the START/STOP
button to stop processing.
Turn the main power ‘OFF’
before removing bowl,
attachments or processed
foods.
CONTINUOUS PROCESSING
IF THE PROCESSING BOWL AND LID ARE NOT CORRECTLY
ASSE BLED, THE FOOD PROCESSOR WILL NOT FUNCTION.

1716
ADDING INGREDIENTS
When various recipes require dry ingredients such as flour, add them directly into the
bowl before processing. There is no need to sift ingredients when using your food
processor. Liquid ingredients may be added while the processor is operating
by pouring through the feed tube in the processor cover. NOTE: When processing sauces or
semi-liquid ingredients, stop the food processor and scrape down the container sides with
the spatula provided.
USING THE FEED TUBE
For best results when slicing, the feed tube should always be packed firmly to allow each
piece of food to support the others. The most important factor for successful slicing and
shredding is the way in which the food is packed into the feed tube. NOTE: Never use
fingers to push food down the feed tube. Always use the food pusher. There will always be
a small portion of food left unprocessed between the food pusher and the blade. When
preparing longer slices, pack food items horizontally.
E ULSIFYING EGG WHITES
Use the E-disc and a minimum of two/three egg whites for best results.
PREPARING SHORTER SLICES
Pack the food items vertically in the feed tube, for best results when shredding and grating.
Remember that softer foods such as cheese (cheddar, mozzarella or Swiss) should be well
chilled before processing. Harder foods such as Parmesan or Romano cheese should be at
room temperature before processing. NOTE: When grating Parmesan cheese do not apply a
lot of pressure to the food pusher.
LIQUIDS
To maximise the capacity of the largest bowl when making soups use the Auto Pulse
feature rather than START/STOP button when processing. To start, add the food chunks
and use Auto Pulse, gradually adding the liquid through the feed tube. If mixture overflows or
fails to blend, stop processing, remove some of the ingredients and process in smaller
amounts.
DISASSE BLY
When processing is completed. Turn off and dismantle the processor, clean and dry all parts.
Store the bowls, medium blade and lid with food pusher assembled on the processor body.
Do not lock the bowl lid whilst in storage. This can damage the safety mechanism built into
the bowl. NOTE: Always wait for the processing blade to stop moving completely before
removing the lid. )&#&!*  .+) % ,+#'&*$ *) *")($-/*
"&$ +" "'((#&!$ /#+* &+)$($*+#* +#'&
PROCESSING TIPS
WHEN RUNNING THE PROCESSOR
Do not run for more than 45 seconds at a time. Allow the processor to cool to room
temperature if you go over the max run time.
USING THE BOWLS
Always try and start with the tasks that require the smallest bowl first, so that you are
removing the used bowls instead of putting clean bowls inside dirty ones. To insert the
small bowl the groove must align with the pip on the m edium bowl.
AUTO PULSE
Use this feature to achieve greater control for delicate foods or for a more even chop. The
Auto Pulse feature is perfect for mixing in foods without puréeing the mixture. It also
allows you to prepare ingredients for frying or casseroles gently whilst preserving their
integrity. When selected the power light flashes, Press again to stop (or press PULSE) If you
press START/STOP you will move to constant processing.
CHOPPING
TIP: Use Auto Pulse for this process.
Try to process pieces of food that are approximately equal in size. When you break, cut or
tear food into uniform pieces before you begin processing, the finished results will be more
uniform. ore consistent processing results are achieved if the bowl is not overloaded.
INCING
Pre-cut meat into cubes approximately 2cm square and use the chopping blade.
VEGETABLES
When processing vegetables such as onions, peel and quarter or cut large vegetables into
smaller evenly sized chunks.
IXING
TIP: We recommend using Auto Pulse when adding hole ingredients to a mixture e.g.
sultanas into a scone mix.
The quantities that can be processed within the processing bowls will vary with the density
of the mixture.
WHEN SLICING, SHREDDING AND GRATING
Cut all ingredients to a size that fits comfortably into the feed tube. Pack the feed tube and,
while holding food steady and upright with the food pusher, press down evenly until all
ingredients are sliced or shredded. The more firmly you push, the thicker the slices or
shreds. Do not use excessive force or you may damage the food processor.

1918
STORING YOUR PROCESSER


ENSURE THE PROCESSOR
IS UNPLUGGED WHILST
IN STORAGE, WITH THE
LID UNLOCKED.
THOROUGHLY CLEAN
AND DRY.
Dismantle the processor,
clean and dry all parts.
Store the bowls and lid with
food pusher assembled on the
processor body. Do not lock
the bowl lid whilst in storage.
This can damage the safety
mechanism built into the bowl.
1UNPLUG
4USE TOOL TRAY
The chopping blades, dough
blade, spindle, spatula and all
discs should be stored in the
toolbox provided.
5CORD TIDY
Excess power cord can be
stored in the cord tidy on
the underside of the
processor.
6STORE IN A
SAFE PLACE
Remember to store all
accessories in the same
mannor you would store
sharp knives, away from
children and away from
the edge of a shelf.
23
CLEAN & DRY UNLOCK LID
CLEANING & AINTENANCE


ALWAYS SWITCH OFF
AND UNPLUG BEFORE
ANY CLEANING. NEVER
USE ABRASIVE CLEANERS
ON ANY OF THE PARTS.
TAKE EXTRA CARE WHEN
WASHING BLADES.
Dismantle the attachments
and bowls from the main
unit before you start
cleaning.
Wipe the main body with a
damp cloth. Dry immediately.
Do not immerse base in
water.
1TURN OFF &
UNPLUG
TOP RACK
ONLY
40oC
4CLEAN
I EDIATELY
Wash the bowl, lid, blades
and discs immediately after
each use with warm soapy
water. Use a small brush to
get to hard-to-reach areas.
TOP RACK
ONLY
40oC
TOP RACK
ONLY
40oC
TOP RACK
ONLY
40oC
5DISHWASHER
All attachments and bowls
excluding the main body are
suitable for dishwasher use .
Use a wash cycle below
40°C. Remove prior to
drying cycle.
TOP RACK
ONLY
40oC
6POSITIONING
Only put the food processor
parts on the top rack of
your dishwasher and keep
them well away from the
heating elements.
DIS ANTLE WIPE CLEAN
23

21
Medium Bowl Small Bowl
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
0.7Kg
0.8Kg
0.8Kg
NA
NA
Bread Dough
Minced Meat
Soup
Victoria sponge mix
Shortcrust pastry
Sliced food
Egg Whites
Ingredients Large Bowl
1.4Kg
1.45Kg
2.25L
using Auto Pulse
8 eggs
1.4Kg
1.8Kg
3-8
AXI U LOADING CHART
Use the chart below as a guide to determine the maximum amount of ingredients to be
processed at one time in the large bowl.
What do I do if my processor does not
turn on?
• Ensure the bowl and lid are locked in
position.
• Check that the small bowl has properly
located onto the medium bowl. If not
the lid will not locate properly and the
processor will not turn on.
• Check the plug is correctly fitted in the
outlet and the power supply is switched
on.
• Check the fuse in the plug. Ensure the
new fuse is the same current value as
original.
What if it switches itself off while I’m
using it?
• The motor may have overheated. To
prevent damage, the unit will
automatically cut all power. If
this happens, turn switch to ‘OFF’,
unplug and allow the unit to cool for
approximately one hour.
Once cool the overheat safety feature
will reset and you can carry on
using the processor.
• Check the lid or large bowl has not
become loose.
TROUBLESHOOTING
What if it doesn’t chop uniformly?
• Blades or discs may not be attached
properly.
• You may be exerting too much force
on the food while pushing down
the feeder tube.
What if my egg whites won’t
stiffen up?
• You may not be using enough eggs
(we recommend a minimum
of two eggs).
• You may be using the wrong accessory;
for egg whites you need the E-disc and
the large bowl.
• You may not be whisking for long
enough.
• Your bowl must be completely clean
and dry.
What if the drive shaft is sticking or the
motor is struggling to turn the mixture?
• The mixture may be too dense,
remove some of the mixture and
process in batches.
• Run the motor for no more than
15 seconds allowing for a one minute
pause between cycles. This allows the
machine to cool down to room
temperature before next use.
• After five cycles the appliance should
be cooled down to room temperature
before the next use.
20

22
This Guarantee covers both parts and
labour. Carriage is not included.
Your guarantee period is as follows:
• 12 year guarantee on the motor,
• 3 year guarantee on parts.
This Guarantee provides benefits that are
additional to, and do not affect, your
statutory rights. This guarantee does not
cover the cost of returning the product to
the dealer from whom it was purchased or
to ourselves. This guarantee applies only to
products sold and located in mainland
Great Britain. It does not cover liability in
respect of or replacement of plugs, cables
or fuses and also does not cover defects
due to:
• Failure to use or maintain product in
accordance with Dualit's instructions.
• The product being connected to an
unsuitable electricity supply.
• Accidental damage to or abuse or
misuse of the product.
• The product has not been modified
except by Dualit or approved agent.
• Dismantling of or interference with the
product.
• Theft or attempted theft of the
product.
Before returning any product under this
Guarantee, please check that:
• You have followed the product
instructions correctly.
• Your mains electricity supply is
functional.
• The defect is not due to a blown fuse.
If you wish to claim under this Guarantee
you should:
• Send the product, postage or carriage
paid, to the dealer from whom it was
purchased or to Dualit direct.
• Ensure that the product is clean and
packed carefully (preferably in its
original carton).
• Enclose details of your name, address
and telephone number and when and
where the product was purchased,
together with proof of purchase (e.g. a
till receipt).
• Give exact details of the nature of the
defect.
This Guarantee does not cover any other
claims whatsoever, including, without
limitation, any liability for incidental, indirect
or consequential damage, nor does it cover
any claims for conversion or modification or
for the costs of repair carried out by any
third party without the prior consent of
Dualit. If replacement parts are fitted to the
product this will not extend the period of
the Guarantee.
For further advice contact the Dualit
customer helpline on [phone]
(09:00 to 17:00 onday to Friday).
Alternatively, email Dualit at
[email protected] or visit www.dualit.com
GUARANTEE
This appliance is of excellent quality and construction. However, if any defects in materials
or workmanship do appear during the relevant guarantee period, we will, at our discretion,
either repair or replace the defective parts, free of charge, subject to the terms and
conditions of our Guarantee shown below.
DON’T FORGET TO REGISTER
YOUR FOOD PROCESSOR
WWW.DUALIT.COM/REGISTER
OR BY POST