Dudek Light 90/110 User manual

USER’S MANUAL FRONTCONTAINER LIGHT 90/110 EDITION 1_01/2020

Congratu ations!
Thank you for choosing the Light 90/110 frontcontainer. We have done our best to present you with a highest qua ity product,
fu fi ing a safety requirements. P ease read this manua carefu y, as this wi et you safe y uti ize a features provided by this
frontcontainer.
We wish you a ot of safe and enjoyab e airtime!
Contents
1. Safety......................................................................................................... 4
2. Description................................................................................................ 4
3. Rescue chute insta ation ......................................................................... 5
4. Frontcontainer insta ation …................................................................... 11
5. Before f ight.............................................................................................. 12
6. Operation and repairs …........................................................................ 12
7. Technica data........................................................................................... 14
3

1. Safety
Parag iding is a potentia y hazardous sport. When f ying a parag ider you have to accept risks of injury and even death. Improper
and/or incompetent use of the harness may increase those risks. In case of any doubts p ease ask your dea er or manufacturer.
!
Dudek Paragliders company does not bear any responsibility for damages or injuries resulting from paragliding activities.
2. Description
Frontcontainer Light 90/110 has been designed for use with any parag iding harness. It is manufactured in two sizes: 90 and 110,
fitting the G obe Light 90 and G obe Light 110 rescue chutes respective y.
4

3. Rescue chute insta ation
Connect the re ease hand e to the point in the midd e
of the bag.
Connect the v-strap to the rescue chute riser.
with a C6 quick ink.
Fix the V-riser with an o-ring
(see picture on the right) and tighten the nut with a wrench.
5

P ace the rescue chute in the frontcontainer as shown on the
right picture.
Lead the assist ines through the oops of the #1 f aps.
Then ead the assist ines through the oops of
# 2 f ap and ock them with temporary pins.
6

Lead the assist ines through the meta oops of the
# 3 f ap and ock them with temporary pins.
Remove the temporary pins and rep ace them with those
of the re ease hand e. P ace their ends in proper
pouches of the #3 f ap.
7

P ace the ends of the re ease hand e in dedicated pouches
on the #2 f ap.
C ose the pins cover with a ve cro strap.
8

Push the remaining parts if the #1 f aps inside and
form the frontcontainer.
9

!
To avoid accidental opening of the rescue system, pins closing the container must be checked before each flight!
The rescue chute must be periodica y aired and repacked according to its manua . The frontcontainer is designed to house the Dudek
Parag iders G obe Light 90 and G obe Light 110 rescue chutes. However, use of rescue parachutes by other manufacturers is possib e
too, as ong as their dimensions when packed do not exceed those of the container.
Vo ume of the Light 90 frontcontainer (right size for the G obe Light 90)
Max 4000 cm3
Min 3700 cm3
Vo ume of the Light 110 frontcontainer (right size for the G obe Light 110)
Max 4200 cm3
Min 3900 cm3
!
After each installation of a rescue chute in a frontcontainer a compatibility test is necessary. In order to do that, hang the harness,
e uipped ready for flight. Seat down in the harness and assume your usual position in flight.. Grab the frontcontainer release handle
and pull it to the side in a resolute effort, so that the parachute is completely out of the container. Still, do not throw it away, so that
the bag remains closed. If the trial was successful, put the rescue chute back into the frontcontainer.
10