Dukane 6640W User manual

Quick Setup Guide
Quick Setup Guide
Connect the supplied power cord.
Connect your computer to the projector.
.
COMPUTER IN
COMPUTER IN
Supplied computer cable (VGA)
Projector Models
6640W 6645 6645W 6650

Slide the lens cover to the left to uncover the lens.
Select a source.
Turn on the projector.

Fn F1 F 12
(→page 26, 145, 208 of the User’s Manual)
TIP:
Press the AUTO ADJ. button to optimize an RGB
image automatically.

Adjust the tilt foot
Rotate the lens shift dial (Lens shift)
Rear foot
Up Down
Adjust the picture size and position.
Adjustable Tilt FootAdjustable Tilt Foot Lever
Ventilation (outlet)
Downward
Upward

Automatic Keystone Correction function is turned
on at the time of shipment.
You can also use the ▲or ▼button to perform
Keystone correction manually with no menu
displayed.
Zoom Focus
(→page 22 of the User’s Manual) (→page 21 of the User’s Manual)
(→page 24 of the User’s Manual)

1. Press the POWER OFF button twice.
The lamp will go off. The POWER indicator
will change color to orange and the STATUS
indicator will light green. This indicates the
projector is in the standby mode.
2. Slide the lens cover to the right to cover the
lens.
3. Disconnect all the cables.
Doc 430-1406003
(→page 27 of the User’s Manual)