Table of Contents
Machinery
1. Description of Mechanisms............................. 7
1-1. Feed Plate Up/Down Device mechanism .. 7
1-2. Paper Feed Mechanism............................. 8
1-3. Feed Drive Mechanism.............................. 8
1-4. Conveyance Mechanism............................ 9
1-5. Paper Receiving Mechanism ....................10
1-6. Conveyance Switch Mechanism...............11
2. Adjusting Sections .........................................11
2-1. Adjusting the Switch Solenoid...................11
2-2. Adjusting the Conveyance Cover..............12
2-3. Adjusting the Tension of the Timing Belt ..13
3. Replacing the Parts........................................14
3-1. Replacing the Feed Rubber Ring..............14
3-2. Replacing the Paper Separator.................14
3-3. Replacing the Electromagnetic Clutch......15
3-4. Replacing the magnet Proximity sensor ...16
Electricity
1. Construction Block Layout .............................19
2. Outline of Each Block.....................................20
3. Test Mode and Checking the Motion .............25
3-1. Setting the test Mode................................25
3-2. Checking Motions .....................................25
4. Using the bit Switches....................................28
5. Trouble Shooting............................................31
6. MAIN SHEMATIC DIAGRAM (DC-6).............33
7. OVERALL SHEMATIC DIAGRAM (DC-6) .....34
8. COMPONENT WIRING (DC-6) .....................35
