Duratool PSG08700 User manual

Page <1> V1.012/06/23
Newark.com/exclusive-brands
Farnell.com/exclusive-brands
Element14.com/exclusive-brands
Handheld Digital Hygro-Thermometer
Part Number: PSG08700
User Manual

Page <2> V1.012/06/23
Newark.com/exclusive-brands
Farnell.com/exclusive-brands
Element14.com/exclusive-brands
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for
the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness,
any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make
any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or
where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its
negligence. DURATOOL is the registered trademark of Premier Farnell Limited 2019.
Features
• Displays face icons that change with the temperature/humidity
• °C/°F Selectable, Temperature and humidity alerts
• Custom alarm setting function and High temperature alert setting
• Belt clip on reverse
• Can be wall mounted and require 3x AAA batteries
• Measuring range: Temp.: -30°C to +99°C (-22°F to 210°F), humidity: 10-99% (RH)
• Resolution of 0.1°C (0.2°F) temp, 1% humidity and accuracy of ±0.5°C at 0°C to 50°C
Specication
Humidity Range : 10% to 99% Relative Humidity
Accuracy : 1%
Resolution : 0.1°C
How to use
ON/OFF : press ON/OFF button ,to enter product to start, Press the ON/OFF key again to start the machine
Back light : press any button, activate back light 5 seconds , press backlight key, activate back light 30 seconds .
HOLD / MAX/ MIN :press “M” , LCD display Max temperature , press “M” again LCD display Min. temperature , press “M”
again hold current temperature.
CLR : press CLR to clear Max or Min temperature .
DEW POINT :press DEW LCD display dew point temperature and humidity .
C/F :If the display is C degree, press the c/f key, switch to F degree display
*Temperature and humidity alarm setting:
1) Press the SET key to start the high temperature alarm setting. The temperature display is 25.0C and the high and low digit
symbol ashes.
2) Press the C/F key, add 0.1C/0.1F upward, and display the alarm symbol. (Press and hold for 3s and then quickly add.)
Add to the maximum and start with the minimum
3) Press the ON/OFF button to close the alarm symbol, close the high alarm setting, and then press ON/OFF to open the alarm
4) Press the CLEAR key to reset the value set for the high position
5) Press the MODE key, the low symbol ashes, the temperature display is 24.9 degrees C and the low symbol ashes, Alarm
30 seconds
After the temperature setting is conrmed, press the “set” key again, save and enter the high humidity alarm setting. The
operation of humidity alarm setting and temperature setting is the same
Note: The high setting point must be larger than the low setting point for the setting to be e󰀨ective
*Support comfort display function,
When the temperature is 14 degrees or less, regardless of the humidity, the LCD displays. WET face
When the temperature is 14.1 to 26.9 degrees and the humidity is 40 to 60 percent, the LCD displays COMFORT, smiling
face. Humidity in Other points show DRY at face
When the temperature is greater than or equal to 27 degrees, regardless of the humidity, the LCD shows WET face