Dvico FusionHDTV User manual

usio
1. Before Getting Started
2. Software Installation
3. Hardware Installation
4. Using DigiREC-HD

2
DigiREC-HD USER License
DATOptic Inc. isgranting you (an individual or an entity, either of which is referred to herein
as “License”) a license to use DATOptic DigiREC-HD computersoftware, hardware, associated media and
printed materials only upon the conditionthat Licenseeaccepts all of the terms and conditions contained in
this User License Agreement (the “Agreement”). If Licensee does not agree to he terms of this Agreement,
Licensee should not install or use the Products rather, promptly return the Products to the place of purchase.
1. Grant ofLicense. ThisAgreement grants Licensee a personal, limited, non-transferable, non-exclusive
right to install and use one copy of the Products on a single computer. No other usesand/or distribution of
the Products are permitted without DATOptic prior written consent. DATOptic Inc reserves all rights not expressly
grantedto Licensee.
2. Limitations or Restrictions. Licensee may not: (i) modify or translate the Products; (ii) reverse engineer
or disassemble the Products, except and only to the extent this restriction is expressly permitted by
applicable law; (iii) separate the Products component parts to transfer to a third party.
3. Intellectual PropertyRights. Licensee acknowledges that no title to the intellectual propertyin the
Products and any components thereof is transferred to Licensee. All rights, titles and copyrights in and to the
productsare owned by DATOptic Inc. The Productsare protected by copyright laws and international copyright
conventions and treaties.
4. Disclaimer of Warranty. The Products are deemed accepted by Licensee. The PRODUCTS are provided
to Licensee “AS IS” and without warranty of any kind. To the maximum extent permitted by applicable law,
DViCO further disclaims all warranties including without limitation any implied warranties of merchantability,
fitness for a particular purpose, and non-infringement. Any and all risk arising out of the use or performance
of the PRODUCTS remains with Licensee. In no event shall DViCO or its suppliers be liable for any
consequential, incidental, direct, indirect, special, punitive, or other damages whatsoever (including, without
limitation, damages for loss of business profits, business interruption, loss of business information, or other
pecuniary loss) arising out of this Agreement or the use of or inability to use the Products, even if DViCO has
been advised of the possibility of such damages. Because some states/jurisdictions do not allow the
exclusion or limitation of liability for consequential or incidental damages, the above limitation applies only to
the extent permitted by applicable law.
5. Limitation of Liability. DViCO’s total liability and Licensee’s exclusive remedy under this Agreement shall
not exceed the replacement cost of a single copy of the Products.
6. Indemnification. Licensee shall hold harmless, indemnify and defend DViCO, its officers, directors and
employees, from and against any claim, suit or proceeding and any losses, damages, fines and expenses

3
(including attorneys’ fees and costs) arising out of or relating to any claims that Licensee’s use of the
Products in conjunction with any Licensee Application infringes the patent,
copyright, trademark, trade secret, or other proprietary rights of any third party, or resulting from any breach
of this Agreement by Licensee.
7. Termination. Without prejudice to any other rights, DATOptic Inc. may terminate this Agreement if Licensee fails
to comply with any term or condition of this Agreement. Upon termination of this Agreement, Licensee shall
immediately discontinue the use of the Products and certify destruction of all full or partial copies of the
Products and related materials provided by DATOptic Inc. Licenseemay also terminate this Agreement at any time
by destroying the Products and all copies thereof.
8. General. Licensee acknowledges that he or she has read this Agreement, understands it, and that by
using the Products Licensee agrees to be bound by the terms and conditions set forth in this Agreement.
Licensee further agrees that the Agreement is the complete and exclusive statement of the understanding
between DATOptic Inc. and Licensee which supersedes any proposal or prior agreement, oral or written, and any
other communication between DATOptic Inc. and Licensee relating to the subject matter of this Agreement. This
Agreement may not be modified except in a writing duly signed by an authorizedrepresentative of DATOptic Inc.
and Licensee. If any provision of this Agreement is held to be unenforceable for any reason, such provision
shall be reformed only to the extent necessary to make it enforceable, and such decision shall not affect the
enforceability of such provision under other circumstances, or of the remaining provisions hereof under all
circumstances.

4
1Before Getting Started ..................................................................................5
1.1 FusionHDTV Specification......................................................................................5
1.2 FusionHDTV System Requirements.......................................................................7
1.3 Package contents ...................................................................................................8
2Software Installation ................................................................................... 11
2.1 Installing FusionHDTV Applications...................................................................... 11
2.2 Driver installation under Windows ME..................................................................21
2.3 Driver installation under Windows 2000 Professional ..........................................32
2.4 Driver installation under Windows XP ..................................................................55
3Hardware Installation..................................................................................68
3.1 About the Board.................................................................................................... 68
3.2 Before Installation.................................................................................................74
3.3 Board Installation..................................................................................................74
3.4 Remote Installation...............................................................................................77
4Using FusionHDTV.....................................................................................79
4.1 Starting and Quitting .............................................................................................79
4.2 Display setup ........................................................................................................79
4.3 Configuration ........................................................................................................83
4.4 Record ..................................................................................................................93
4.5 Playing Files .........................................................................................................95
4.6 SnapShot Capturing .............................................................................................96
4.7 Using EPG............................................................................................................ 97
4.8 Cut Editing ..........................................................................................................102
4.9 Using FusionRemote ..........................................................................................104
4.10 Using Signal Checker ......................................................................................... 116
4.11 Using FusionConverter....................................................................................... 117
4.12 FusionHDTV ShortKey ....................................................................................... 119

5
1 Before Getting Started
1.1 FusionHDTV Specification
A Highly cost effective ATSC/ NTSC TV reception card
You can enjoyHDTV at quite a low pricedue to DATOptic Inc.’s innovative HDTV software decoding engine.
Unrivaled crystal-clear picture quality
FusionHDTV provides up to 5 times higher resolution when compared to analog TV, and provides
crisp and crystal-clear picture quality to a PC screen.
Good picture quality on LCD or low-resolution monitor
FusionHDTV shows excellent and super-clear on HDTV screens and even on LCD TV’s and low
resolution CRTdue to DATOptic’s proprietary decoding engine.
Great system compatibility
FusionHDTV is compatible with most video cards and motherboards. FusionHDTV works on any
recent VGA cards including Nvidia MX series or later chipsets, as well as ATI Radeon chipsets. It
works quite well on Intel, VIA, SIS, and other motherboard chipsets. Minimum system requirements
are Pentium 4 1.6G and DDR266 memory (or RDRAM memory), or AMD’s Athlon™ XP 1600+ or
faster processor, if you don’t have the ATI Radeon VGA card. Pentium 3 800Mhz or faster will be
enough if you have an ATI Radeon card.
Recording and playback of the HDTV stream
You can record live HDTV broadcasting streams to a PC and play them back anytime you want.
Using most recent VSB tuner – Best DTV reception rate
FusionHDTV uses the most recent VSB tuner to get the best reception rate, so you can get the un-
interrupted and stable HDTV screen.
69 terrestrial digital(8VSB)/analog channels
FusionHDTV supports 69 terrestrial digital (8VSB) and all analog channels, so you will have the ability
to receive all the channels available to you at your location.
All 18 ATSC formats compliant
FusionHDTV supports all of the 18 formats of ATSC broadcasting, so you can experience the all of the
full ATSC format-rich content available.
AC3 audio output
FusionHDTV provides AC3 audio decoding, which is the standard audio format for ATSC. It can also
bypass the AC3 audio to digital output and connect directly to an AV amplifier.
High resolution still capture
FusionHDTV provides high resolution still screen capturing capability in live playback as well as file
playback mode.
Cut Edit feature – Cut the transport stream files
You can cut out the wanted scenes from the captured file and reconstruct the video clip.
Supports virtual channel
Virtual channel is set on the channel list independent of physical channel.
- OSD for virtual channel and broadcasting station name is shown whenever channel is changed.

6
Supports sub-channel
Sub channel is listed up in sub channel play list and can be selected with channel up/down button or
mouse selection in sub channel play list.
Second language
Supports the second language in digital broadcasting
Supports screen saver off.
Screen saver is off while FusionHDTV runs.
Supports AAC audio decoding
TS file clips and DVHS with AAC audio can be played directly in FusionHDTV.
Direct NATIVE .MPG recording
You can record DTV stream to .MPG format directly.
Add To Favorite List
You can add your favorite programs into favorite list before watching them.
HD-to-DVD or DivX format conversion
HD clips can be converted to MPEG2, DVD files or DivX format using FusionConverter tool.
Supports DVHS record and control ( Windows XP or above only )
Direct DVHS capture/ recording/ playback with OHCI card
Supports Titan EPG
Supports recording and live viewing according to TitanTV EPG.
Embeds the TitanTV EPG on the FusionHDTV application.
Time Shifting
FusionHDTV provides the various file playback functions just like live TV mode. That is, pause/ instant
replay/ time-shifting by scroll bar/ fast-forward/ fast-rewind.
Being interrupted while watching live TV programs (such as pick up phone calls & answer the door), all
you need to do is simply press the Pause button and freeze the picture for a period of time, and then
pick up right where you left off.

7
1.2 FusionHDTV System Requirements
System requirements for FusionHDTV are as follows
<Input/Output>
One TV antenna
One CABLE antenna
One inside stereo connection jack to sound card for analog TV
S-Video IN, Composite IN
External Sound card Connection cable
< DVB-T USB>
One TV antenna reception port
One Thru Pass Port
One USB Port ( USB 2.0 only )
<DxVA VGAs>
Pentium3 800MHz or faster with 128M memory
Celeron 900Mhz or faster with 128M memory
GeForce4 MX420,440,Fx5200,5600 Series, Ti Series
All ATI Radeon series VGAs
WinME/2000/XP or later
Ultra-DMA66 enabled main board and HDD for recording
<nonDxVA VGAs>
Pentium4 1.6GHz or faster with 128M memory
All Nvidia MX series VGAs and ATI Radeon series VGAs
DDR266 or faster memory
WinME/ 2000/ XP or later
Ultra-DMA66 enabled main board and HDD for recording
<DVHS>
Windows XP or above only.
OHCI compatible 1394 card

8
1.3 Package contents
The FusionHDTV package contains the following items:
[FusionHDTV I]
①FusionHDTV card
②Setup CD
③Manual
④Internal cable to sound card for Analog TV Audio
[FusionHDTV II]
①FusionHDTV card
Setup CD②
Manual③
④Internal cable to sound card for Analog TV Audio
⑤External Sound card Connection cable
⑥External source audio connection cable
[FusionHDTV III ]
①FusionHDTV card
②Setup CD
③Manual
④Internal cable to sound card for Analog TV Audio
1 2 3 4
1 2 3 4 5

9
⑤External source audio connection cable
[FusionHDTV DVB-T ]
①FusionHDTV card
②Setup CD
③Manual
④Internal cable to sound card for External output Audio
⑤External source audio connection cable
[ DVB-T PLUS]
①FusionHDTV card
②Setup CD
③Manual
④Internal cable to sound card for External output Audio
⑤External connection cable
[ DVB-T Lite ]
①FusionHDTV card
②Setup CD
③Manual
1 2 3 4 5

10
[ DVB-T USB ]
①FusionHDTV USB Board
②Setup CD
③Manual
④FusionHDTV transceiver
* Optional FusionHDTV remote transceiver
①FusionHDTV transceiver
Receiver②
<Important Notice>
First install the software before you plug the FusionHDTV card in your system. It will ease the installation
process. If you plugged the card in already, you can still proceed anyway.
1 2
1 2 3 4

11
2 Software Installation
Most likely there will be an updated version of the files on our web site.
Please check the site (Http://www.DATOptic.com
) before you install the software included in the CD.
2.1 Installing FusionHDTV Applications
Insert FusionHDTV Installation CD into the CD-ROM drive. The setup window will automatically pop up. if
you downloaded the recentversion on DATOptic’s website, please run install.exe or setup.exe.
2.1.1 Uninstall Drivers
1) When you select Uninstall Driver in the menu on the FusionHDTV INSTALLER program, it will
remove all the old drivers previously installed
2) When all the drives are removed, you will see following message:

12
2.1.2 Installing FusionHDTV Software
Important: Installation on Windows 2000 Professional or Windows XP
Before you install FusionHDTV software, be sure that you logged on as an account with
Administrator privileges.
1) Select “Install FusionHDTV”.
2) At the FusionHDTV Installation dialog opens, click on the “Next>” button.
3) The user Information window will show up. Type in the serial number, which is on the jacket of
FusionHDTV installation CD, then click on the “Next” button.

13
4) The “Choose Destination Location” window will appear. Click on “Next” if you want to install the
FusionHDTV in the default directory. Otherwise, you can choose a different directory by clicking on
“Browse”.
5) Press “Next” on the Destination Folder selection window.
6) The “Setup status” window will appear.

14
7) Choose your country, then click “OK”.
8) PC specification selection windows will appear. Please select the appropriate system. You can
change the mode after installation with configuration menu of the application program. You do not
need to reinstall the program with different options.

15
9) Select your FusionHDTV card, and Press ‘Next’ to install latest drivers.
10) You will see the progress window.

16
11) Press “Yes” for the digital signature message.
12) Following message indicates the completion of the setup.
13) By clicking the Finish button, the software installation is done.
14) When you reboot, the system will ask for the 5~6 drivers. Please click “Yes” when the digital
signature window appears.
<Notes>
In certain cases, Windows will ask for the .sys files. You can locate the sys files in the C:\Program
Files\DVico\FusionHDTV\driver folder.

17
2.1.3 Installing Microsoft DirectX 9
Important! Installing on Windows 2000 Professional or Windows XP
Before you install FusionHDTV software, be sure that you logged on as an account with
Administrator privileges.
You can check the version of DirectX by typing “dxdiag” on the command line which appears with
menu selection “start->run”
If you have DirectX 9 or later already, you do not need to install DirectX 9 again.
1) Run ‘Install.exe’ and then select “Install Direct 9”.
2) Read the License Agreement carefully and check “I accept the agreement” and then click on “Next”
if you agree.
3) To start installing of DirectX 9.0 Runtime, click on “Next”.

18
Tip If there is a DirectX already installed in the system, a different window will show up instead of the
one above.
4) Click on “Finish” to restart system and complete installation of the DirectX.

19
2.1.4 Installing the FusionHDTV remote transceiver
Installation Caution
•Remote transceiver is optional and can be purchased separately through FusionHDTV dealers.
•First, install the FusionHDTV application then install the FusionHDTV remote transceiver program.
Important: Installation on Windows 2000 Professional or Windows XP
Before you install FusionRemote software, be sure that you logged on as an account with
Administrator privileges.
1) Select “FusionHDTV Remote transceiver Installation” at the Install.exe window.
2) Click “Next” to start the Remote transceiver installation.
3) The “Choose Destination Location” window will appear. Click on “Next” if you want to install the
FusionRemote in the default directory. Otherwise, you can choose a different directory by clicking on
“Browse”

20
4) Click on the “OK” to restart and finish installation.