DW Smart II 100 User manual

!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!!!!
User!Manual!
!
&Please read this user manual before using this product！
Keep it for further reference!

!
!
!
!
INDEX
!
Ⅰ
PRODUCT MAIN FEATURES............................................ 01
Ⅱ
OVERVIEW AND DIMENSIONS ........................................ 02
Ⅲ
SAFETY INFORMATION .................................................. 02
Ⅳ
POWER CONNECTION .................................................... 03
Ⅴ
CONTROL PANNEL ......................................................... 06
Ⅵ
DMX PROTOCOL............................................................. 09
Ⅶ
COMMON INSTRUCTION ................................................ 10
Ⅷ
TECHNICAL SPECIFICATION .......................................... 10
Ⅸ
APPENDIX ....................................................................... 11
Thank you for using our product! Please read this manual carefully and completely. For
technical reference in future, please keep this user manual well. This user manual
contains all installation and operation information of this LED Studio Focalize Light, it’s
very useful for user to install and operate the light. Please strictly abide by the relevant
instruction for the installation and operation.
This light has very beautiful appearance. Based on the LED Film and Television Flat Light
Technology, using high brightness COB LED chips beads matrix arrangement of large
area, through the whole aluminum shell to realize heat dissipation naturally, we have
designed this light. This light has high brightness, good head dissipation, ultra-quiet and
other features. It can satisfy the requirement of indoor movie filming for the lighting
layout. It is a good substitute of the traditional Fresnel spot light, which is very suitable
for the studio room, TV station, Meeting room, stage, show and other entertainment
places.
This light meets the following criteria:
GB7000.1-2007/IEC60598-1:2003
GB7000.217-2008/IEC60598-2-17:1984+A2:1990
Ⅰ
!PRODUCT!MAIN!FEATURES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The light’s lighting function is controlled by DMX-512, very convenient;
Using international standard (1990) DMX single, digital control panel display;
With 1 DMX channel as dimmer; (Strobe channel closed)
Dimmer range: 0~100%, 0~15% dimmer smoothly;
CRI more than 92, 3000~5600K color temperature optional, light effective distance is

!
!
3~15 meters;Cast aluminum radiator, equips copper tube radiator, no need fan cooling,
realize the silent,
intelligent temperature control system, improve the quality of our products stable
performance, apply to indoor installation.
Using brand LED chips, integrated encapsulation, improve reliability and long lifespan.
Using the advanced optical reflective material, make the light on the projection distance
and brightness is higher than traditional film soft light.
!
Ⅱ
!OVERVIEW!AND!DIMENSIONS! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
All dimensions are in millimeters
Ⅲ
!SAFETY!INFORMATION!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
※Important
Every person involved with the installation, operation and maintenance of this device has
to be qualified and follow the instructions of this manual. Manufacturer will not with
responsibility for those operations which are not according to this Instruction.
Verify that the voltage matches the rated voltage.
When the voltage is 110V, Do not connect more than 10 lightings in total to AC mains
power in one interconnected daisy chain
When the voltage is 220V, Do not connect more than 20 lightings in total to AC mains
power in one interconnected daisy chain
Before using the fixture, check that all power distribution equipment and cables are in
perfect condition and rated for the current requirements of all connected devices.
Always ground (earth) the fixture electrically.
Avoiding hit the Light when you are move or install the light.
The minimum distance between light-output and the illuminated surface must be more
than 0.5 meters. Keep all combustible materials (for example fabric, wood, paper) at least
0.2 meters away from the fixture.
Do not expose the fixture to rain or moisture.
Avoid looking directly into the light source (especially those who suffer from epileptic fits)
Maximum ambient temperature (Ta) is 40°C. Do not operate fixture at temperatures
higher than this.
The Maximum surface temperature is 50°C
When suspending the fixture above ground level, verify that the structure can hold at
least 10 times the weight of all installed devices.
Verify that all external covers and rigging hardware are securely fastened and use an
approved means of secondary attachment such as a safety cable.
Ⅳ
!POWER!CONNECTION!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
03!

!
!
INSTALLING!A!NENUTRIK!CONNECTOR!ON!A!POWER!CABLE!
Put bushing and chuck onto the cable.
Prepare cable as shown above. The power cable must is a three-conductor 2.5mm2 cable.
Insert the wire into the terminals and fasten the clamping device by a flat screw driver.
Push insert and chuck into housing (pay attention to the guiding keyway).
Fasten bushing.
The color-coding schemes and some possible pin identification schemes; if pins are not
clearly identified, or if you have any doubts about proper installation, consult a qualified
electrician.
RELAYING!POWER!TO!OTHER!DEVICES!
The lightings can be linked in a chain by power cables which installed a blue and a light-
gray connectors on the two ends. The light-gray connector connects to the power out
socket of the first lighting, and the blue connector connects to the power in socket of the
subsequent lighting, and soon.
The power cable must is a three-conductor 2.5mm2 cable.
When the voltage is 110V, Do not connect more than 10 lightings in total to AC mains
power in one interconnected daisy chain.
When the voltage is 220V, Do not connect more than 20 lightings in total to AC mains
power in one interconnected daisy chain.

!
!
!
PHYSICAL!INSTALLATION!
This lighting can be placed on a horizontal surface such as a stage or clamped to a truss or
similar rigging structure in any orientation using a rigging clamp.
When suspending the fixture above ground level, verify that the structure can hold at
least 10 times the weight of all installed devices.
Verify that all external covers and rigging hardware are securely fastened and use an
approved means of secondary attachment such as a safety cable.
Ⅴ
!CONTROL!PANNEL! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
BUTTON
MENU
UP
DOWN
ENTER
Call the main menu, or escape the current menu, (i.e. return to the
upper menu and give up the selected item or parameter).
Browse the menu item forward or increase the parameter.
Browse the menu item backward or decrease the parameter.
Confirm the selected item or parameter, (i.e. enter into the next
menu, or escape the current menu and save the selected item or
parameter).
MAIN MENU
The way into the menu as below:
1. Press ENTER when the display show the title information;
2. Press UP or DOWN button to choose the right menu which you need;
3. Press ENTER into the menu;
4. Press UP and DOWN button to set the parameter or setting;
5. Press ENTER to save the setting;
6. Press MENU/SET button to back.
MENU MAP
LCD SHOW
Function Instruction
Operation of
Buttons
Supplementary
Instruction
T=xxxC
The temperature of LED
bulb radiator in real time
(Celsius)
If there is no this
temperature shows, means
the temperature sensor
failure
If the value over 80,
please check the wind path
is normal or not
No Signal
Couldn't receive the DMX
512 signal
Wire color
Conductor
Symbol
Brown
Live
L
Blue
Neutral
N
Yellow/green
ground

!
!
RX DMX
Received the DMX 512
signal
RX Slave
Slave mode
You only need
set a master
light, the slave
light will be
identified
automatically
You need pull off
the DMX signal from
console under
master/salve mode
Address
Address setting
Press UP,
DOWN button
to set the
address you
need, then
press ENTER
to save.
Mode
Working mode option
Mode
= 04 Channel DMX
Mode
= 05 Channel DMX
Mode
= Alone scene ↓
Set auto mode
Dimmer 1
Dimmer,
dimmer=0-255
= 000
Set auto mode
Dimmer 2
Color Temperature=
3200K
4200K
5600K
= 000
Press UP,
DOWN button
to choose the
menu you
need, then
press ENTER
to save.
Set alone scene
Strobe
Strobe,
Strobe=0-255
= 000
SETTING DMX 512 MODE
1. Press ENTER when the display show the title information;
2. Press UP/DOWN to choose the Mode menu, then press ENTER into;
3. Press UP/DOWN to choose 04 Channel DMX or 05 Chanel DMX menu, then press
ENTER to save;
4. Press MENU/SET back the title mode(the second line will shows 04CH or 05CH
Address=001), the setting is ok.
SETTING POWER ON, LIGHT ON
1. Press ENTER when the display show the title information;
2. Press UP/DOWN to choose the Mode menu, then press ENTER into;
3. Press UP/DOWN to choose Alone scene menu, then press to save;
4. Press UP/DOWN to choose Set auto mode Color Tempe rat ure menu, then press
ENTER into the option of color temperature;
5. Press UP/DOWN to choose Set auto mode Dimmer menu, then press ENTER into the
adjust function of the LED;
6. Press UP/DOWN to adjust the brightness (=000 light off, =255 Max brightness), after
the setting, press ENTER to save;
7. Press twice MENU/SET button to back the title mode(the second line will shows
Master Auto), the setting is ok.
*The!sound!active!mode!based!on!the!light!has!the!sound!active!mode!or!not,!this!is!
a!option!function.!Please!contact!sales!manager!when!you!need!it.! !
08!

!
!
Ⅵ
!DMX!PROTOCOL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
4CH MODE!
CH
Name
Value
Function
CH1
General dimmer
000←→255
0-100% linear dimmer
CH2
Fixed Color-Tem.
000←→099
100←→149
150←→199
200←→255
Close
3200K
4500K
5600K
CH3
Color 1
000←→255
0-100% linear dimmer
CH4
Color 2
000←→255
0-100% linear dimmer
5CH MODE!
CH
Name
Value
Function
CH1
General dimmer
000←→255
0-100% linear dimmer
CH2
Fixed Color-Tem.
000←→099
100←→149
150←→199
200←→255
Close
3200K
4500K
5600K
CH3
Color 1
000←→255
0-100% linear dimmer
CH4
Color 2
000←→255
0-100% linear dimmer
CH5
Strobe
000←→255
Strobe from slow to fast
Ⅶ
!COMMON!INSTRUCTION! ! ! ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The light uses international 3/5 pins DMX signal cannon for DMX in and DMX out;
The light uses blue LCD display to show the parameter. If there is no DMX in, the display
will shows the information which you can check from the menu map.
In fact, the light has 2 DMX channels modes, please refer the DMX channel chart.
This light uses intelligent full aluminium shell for the heat dissipation, through the
electronic temperature detection ensure the stability of the circuit at any time;
This light is only for indoor use, when you install it by hanging, please use the safety
cable to ensure the safety.
If you have any questions, please contact with our sales manager.
Ⅷ
!TECHNICAL!SPECIFICATION!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
·Input power: AC100~240V, 50/60Hz
·Power consumption: 250W
·Light sources: 200W brand bicolor COB LED Lamps
·LED lifespan: 50,000hours
·Dimmer: 0~100%, 0-15% smoothly dimmer
·Beam angle: 15-60degree
·Color rendering index: ≥92Ra
·Color temperature: 3200K-5600K
·Control mode: DMX-512
·DMX channel: 4CH/5CH
·Focus: manual focus adjustable
·Light visor: optional
·IP rating: IP20

!
!
·Housing material: aluminum alloy
·Working temperature: -25~40centigrad degree
Ⅸ
!APPENDIX!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Problem and solution
Problem
Reason
Resolution
Device not work
No power
AC100-240V, 50/60Hz
Check the power connection, and
make sure device connect the
mains in well condition.
Check if the fuse is good.
LED Bulb is off
LED bulb damaged
Replacing LED bulb
LED drive board damaged
Replacing LED drive board
Temperature switch damaged
Replacing temperature switch
Fans not work
Fans damaged
Replacing fans
Caution
l Unqualified person involved with installation, operation and maintenance of this
device is prohibited
l If any above mentioned problem happened, or unknown problem happened, please
contact us.
by
Fuchsweg 14b
51647 Gummersbach
[e-mail]
www.dw-eventtehnik.de