Dynacraft LIGHT-UP DINO GRIP User manual

STEP 1 :
To turn on the light and make sounds,
push the button as shown.
STEP 2 :
Remove the used batteries and insert
3 x 1.5V size AAA batteries as shown
in diagram at right.
Loosen the screw of the battery cover under
the Dino Grip.
STEP 3 :
Reverse above process to secure the
battery cover.
WARNING: Do not let use of the light or
sounds features interfere with safe riding
or distract your child while riding. Never
take you hands off the handlebars while riding.
LIGHT-UP DINO GRIP
PLEASE KEEP THESE INSTRUC-
TIONS FOR FUTURE REFER-
ENCE AS THEY CONTAIN
IMPORTANT INFORMATION.
ASSEMBLY
HOW TO REPLACE BATTERIES
STEP 1 :
STEP 2 :
Unscrew the four screws in grip clamp.
STEP 3 :
Place the clamp on the handlebar and use four 4x12 screws to tighten it to the handlebar as shown.
Locate the Dino Grip that is tied to the bike frame,
and cut zip tie to remove.
Please also refer to the owner’s manual that came with your bicycle.
Due to potential exposure to small parts and sharp edges, attachment, detachment,
Battery removal and any other maintenance should only be done by an adult.
HOW TO USE
Pull the Plastic tag from the battery cover.
STEP 1 :
STEP 2 :
Plastic tag
4x12 srews
WARNING: Make sure that the device is secure on the handlebar before riding or allowing you
child to ride. Failure to do so could result in a loss of control or fall.
DC 1.5V (SIZE AAA) DC 1.5V (SIZE AAA) DC 1.5V (SIZE AAA)
Button

IMPORTANT: BATTERY INFORMATION
CAUTION:
CAUTION: TO AVOID BATTERY LEAKAGE
1. Always follow the instructions carefully. Use only batteries specified and
be sure to insert them correctly by matching + and - polarity markings.
2. Do not mix old batteries and new batteries or standard (carbon-zinc) with
alkaline batteries.
3. Remove exhausted or dead batteries from product.
4. Remove batteries if product is not to be played with for a long time.
5. Do not short-circuit the supply terminals.
6. Should this product cause, or be affected by, local electrical interference,
move it away from other electrical equipment. Reset (switching off and
back on again or removing and re-inserting batteries) if necessary.
7. RECHARGEABLE BATTERIES: This product does not allow use of
rechargeable batteries.
Batteries included. Replace with 3x1.5V “AAA/LR3” size batteries.
1. As with all small batteries, the batteries used with this product
should be kept away from small children who still put things in their mouths.
If they are swallowed, promptly see a doctor and have the doctor phone
[phone] collect. If you reside outside the United States, have the
doctor call your local poison control center.
2. Be sure to insert the batteries correctly and always follow the
product and battery manufacturer’s instructions.
3. Do not mix old and new batteries of alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium) batteries.
4. Always remove weak or dead batteries from the product.