dynarex 10363 User manual

Manufactured for:
Dynarex Corporation
10 Glenshaw Street
Orangeburg, NY 10962
USA • www.dynarex.com
Made in China
Reorder No. 10363
Elongated Raised
Toilet Seat
with Detachable Arms
WEIGHT CAPACITY: 300 Ib.

SYMBOL GLOSSARY
For an explanation of symbols
used in Dynarex packaging, visit
dynarex.com/symbols.php R190122
1. Turn the Elongated Raised Toilet Seat upside
down. Locate the receiving brackets and find the
“R” and “L” markings denoting the Right and Left
sides.
2. Inspect the arms. Find the “R” and “L” markings
denoting the Right and Left sides.
3. Align the Right side arm with the Right side of
the Elongated Raised Toilet Seat. Insert both
ends of the arm into the receiving brackets.
Depress the brass push pin and slide the arm
into the brackets. Ensure brass push-pin “snap”
through the holes in the opposite fame.
4. Repeat step 3 for the left side.
ASSEMBLY
INCLUDED IN BOX
INSTALLATION
Elongated Raised
Toilet Seat
Washer (A)
x2
Washer (B)
x2
Wing Nut
x2
Screw
x2
Arm
x2
Tubing from Arms
Receiving
Brackets
WARNING:
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
1. Remove your toilet seat. (Figure 1)
2. Place your Elongated Raised Toilet Seat on the
toilet, place your toilet seat on top of the riser,
lining up the holes of the riser and the seat with
the holes on the toilet frame. (Figure 2)
3. Put the enclosed bolts thru the holes, attaching
the Elongated Raised Toilet Seat to the toilet
frame with the nuts provided. (Figure 3)
WARNING! Before using your Elongated Raised
Toilet Seat, push on the unit firmly to ensure that it
is securely attached.
Figure 1
Figure 2Figure 3
Washer (A)
Washer (B)
Wing Nut