Dynascan DK651DR5 User manual

USER MANUAL
DK651DR5
67201 | V2.04

0
Contents
Material Contents Declaration................................................................................................................1
Recycling and Energy Information .........................................................................................................1
Declaration of Conformity.......................................................................................................................2
Safety Precautions .................................................................................................................................3
Important Safety Information..................................................................................................................4
Getting Started ....................................................................................................................................... 5
Contents ............................................................................................................................................. 5
Installing and Replacing Remote Control Batteries............................................................................5
Installation............................................................................................................................................... 6
Connecting to a Power Source........................................................................................................... 9
Connecting an External Video Source .............................................................................................10
Input / Output Terminals...................................................................................................................11
Operating Instructions .......................................................................................................................... 11
Powering On/Off the Display............................................................................................................12
Using the Remote Control................................................................................................................13
Navigating the On Screen Display (OSD) Menu ..................................................................................15
Specifications ....................................................................................................................................... 21
Input Mode............................................................................................................................................22
Pin Assignments...................................................................................................................................23
RS-232 Input ....................................................................................................................................23
Troubleshooting....................................................................................................................................24
About DSM365 ..................................................................................................................................... 25

DK651DR5 User Manual 1
Material Contents Declaration
Part Name
Hazardous Substances
Lead
Mercury
Cadmium
Hexavalent
Chromium
Polybrominated
Biphenyls
Polybromodiphenyl
Ethers
Pb
Hg
Cd
Cr6+
PBB
PBDE
PCBA
O
O
O
O
O
O
CHASSIS
O
O
O
O
O
O
ACCESSORY
O
O
O
O
O
O
PACKAGE
O
O
O
O
O
O
“O” indicates that the level of the specified chemical substance is less than the threshold level
specified in the standards of SJ/T-11363-2006 and EU 2011/65/EC.
“” indicates that the level of the specified chemical substance exceeds the threshold level specified
in the standards of SJ/T-11363-2006 and EU 2011/65/EC.
Recycling and Energy Information
DynaScan is firmly committed to its environmental protection efforts and we believe that reducing our
products’ impact on the environment is of the utmost importance. We are dedicated to meet the
latest environmental protection regulations.
Energy usage
Mode
Energy Consumption
Power On Mode
Typ. 1000W / Max. 1600W
Standby
< 50W
Disposal
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
Contact your local government for information regarding the collection systems available. If electrical
appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater
and get into the food chain, damaging your health and well-being. When replacing old appliances
with new one, the retailer is legally obligated to take back your old appliances for disposal at least for
free of charge.

DK651DR5 User Manual 2
Declaration of Conformity
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the
user's authority to operate the equipment.
Manufacturer Name
DynaScan Technology Corp.
Manufacturer Address
6F, No. 88 Wenmao Rd., Guishan Dist, Taoyuan City 333001,Taiwan
This device complies with Directive 2014/53/EU issued by the Commission of the European
Community.
Article (a)
Article (b)

DK651DR5 User Manual 3
Safety Precautions
CAUTION
Do not install the display in a wet environment or place anything filled with liquid
such as a vase or beverage on top of it.
Do not install the display near flammable objects such as gasoline or other
volatile liquids.
Do not install the display near any heat sources such as radiators or other
heating devices.
Do not install the display in the dusty environment.
Do not damage the power cord or plug.
Do not disassemble the screen to avoid electric shock.
The product can normally be operated at an altitude under 2000m. Abnormalities
may occur when installing the device at an altitude above 2000m.
Please affix the stand to the ground steadily before mounting the display onto the
stand.
WARNING
Please power off the LCD and the video source before plugging in the DVI, DP or
HDMI cable.
Please installed the display in well-ventilated place, do not install in a confined
space.
Suitable for mounting on concrete or other non-combustible surface only.
If it gives off smoke, strange smell, or unusual noise, or when it gets too hot to
touch, immediately unplug the display and contact the dealer.
Clean only with soft, dry cloth but not use chemical liquids, and unplug while
cleaning.
Do not use extreme force or any sharp or pointed objects to touch the display.
Do not drop or allow any object to fall to the display.
Do not operate the display with wet hands to avoid electric shock.
Do not discard this product with general household waste. Please be sure to
comply with the local waste regulations.
This device uses, generates and radiated radio frequency energy. The radio
frequency energy produced by this device is well below the maximum exposure
allows by Federal Communications Commission (FCC).
When a stationary or fixed image is displayed on the screen for a long time, the
image may be permanently imprinted on the screen. This phenomenon is
known as image burn-in and is not covered by the manufacturer's warranty.
In order to avoid burn-in, avoid prolonged display of static or fixed images on the
screen.
Power supply cord must not be attached to the building surface, nor run through
walls, ceilings, floors and similar openings in the building structure.
Power cord shall be connected to a socket-outlet with earthing connection.

DK651DR5 User Manual 4
Important Safety Information
Disassembling the LCD is strictly prohibited. Opening the cover may expose the user to electric
shock or other hazards. Please contact DynaScan certified service professionals for all
maintenance requirements.
Do not allow any liquid to enter the LCD. Also avoid placing the LCD close to water sources.
Do not place heavy objects on the power cord. A damaged power cord might cause electric
shock or fire.
Do not bend, twist, or damage the power cord.
The power cord must comply with the local safety regulations.
Do not damage or modify the prongs/pins and the ground contact on the power cord plug.
Do not place the LCD on an unleveled surface or an unstable vehicle. The LCD could fall over
and cause substantial damage.
Do not cover the vents and/or the heat sink.
Do not install the LCD beside radiators or other heat sources. The installation site should have
sufficient ventilation so the heat generated by the LCD can be dissipated.
Do not use the Signage in a hot, humid, dusty, or fumy environment.
Handle the LCD with care. Save the packaging materials for transport later.
Clean the LCD backside at least once a month for dust and other particles.
Unplug the LCD immediately and contact a DynaScan certified service professional as soon as
possible when any of the following situations occurs:
Damaged power cord or power plug.
If liquid or foreign object has entered the LCD.
If the LCD has been exposed to rain or water.
If the LCD has been dropped or the casing has become damaged.
If any structural damage such as cracks or unnatural vibration is found.
If the LCD cannot be operated following the steps outlined in this manual.
If the LCD emits smoke or other odors, or generates strange noises.
Operating Suggestions
Avoid displaying a stationary image for a long period of time in order to prevent image sticking.
Cleaning the Panel
Use a soft, lint-free cloth to gently wipe the dust off from the screen panel.
Do not use any hard material to wipe the panel.
Do not poke the panel with your hand or any sharp object (such as a pen or a nail) or exert
excessive pressure on the panel to prevent any damage.
Do not use any cleaning solutions on the panel as it might cause discoloration.
Cleaning the Casing
Unplug the power cord.
Gently wipe the casing with a soft cloth.
Attention
Do not use any of the following solutions to clean the casing as they may damage the paint and
cause it to crack or peel: benzene solution, alkaline solution, alcohol-based cleaning solution,
glass cleaner, wax, polisher, or detergent.

DK651DR5 User Manual 5
Getting Started
Contents
Confirm that the accessories below are shipped along with the display. If any item is missing, please
contact your dealer. The color and shape of the accessories may vary with the products.
DK651DR5 Professional LCD.
Remote Control x 1 pc.
Batteries (1.5V / AAA) x2 pcs.
Installing and Replacing Remote Control Batteries
1. Open the battery compartment cover.
2. Insert 2 new AAA batteries.
3. Close the battery compartment cover.
Warning:
Incorrect usage of batteries may cause leakage or explosion.
Pay attention to the polarity when installing the batteries.
Do not mix different types of batteries or new and used batteries. Doing so may shorten the
battery life or cause leakage.
Remove or replace the batteries when they are empty in order to prevent acid leaking in the
battery compartment.
Do not touch the leaked substance from the batteries in case of a battery leakage. Doing so
may hurt human skin.
Note: If the remote control is not going to be used for a long time, we recommend removing the
batteries from the remote control.

DK651DR5 User Manual 6
Installation
Incorrect installation may cause injury or damage the equipment. Product warranty does not cover the
damage caused by improper installation and DynaScan shall not be held responsible in such incident.
A

DK651DR5 User Manual 7
B

DK651DR5 User Manual 8
C

DK651DR5 User Manual 9
Connecting to a Power Source
Using the power cable, connect it in the power terminal inside the front door of the display shown in the
diagram below. Connect the power cable to a 200-240 volt, 50 / 60Hz 15A AC power outlet.
Insert the plug completely into the socket. A loose power connection may cause damage to the
display and/or lead to a fire hazard.

DK651DR5 User Manual 10
Connecting an External Video Source
Turn OFF the power of both LCD , external video device and open the front side door. Using the DP
cable (or HDMI cable), insert one end into the DP-IN (or HDMI 1-IN, HDMI 2-IN) which shown in the
diagram below. Connect the other end of the DP cable (HDMI cable) to the DP output (or HDMI
output) of the video source. Refer to your video device’s manual for additional information.
Front side
Back side

DK651DR5 User Manual 11
Input / Output Terminals
A. RJ-45 1 (IN): RJ45 network input connection.
B. RJ-45 2 (IN): RJ45 network input connection.
C. RS-232 (IN): RS232C network input connection for remote control from PC.
D. HDMI 1 (IN): Connect the HDMI output of a PC or an AV device via a HDMI cable.
E. HDMI 2 (IN): Connect the HDMI output of a PC or an AV device via a HDMI cable.
F. DP (IN): Connect the DP output of a PC or an AV device via a DP cable.
G. USB 3.0 port1: Support for USB flash drive storage, mouse and keyboard.
H. Extension Connector: Extension Connector for optional IR Extension sensor kit (ESK302).
I. Micro SD card: Support for up to 128GB, FAT32 format is supported.
J. Thermal: Extension Connector for optional Extension thermal kit (ETK302).
K. Audio (OUT): Connect the audio signal output from Audio IN jack to an external AV device.
L. AC (IN): Connect the supplied power cord to the wall outlet.
M. Power Switch: Press to switch the main power on/off.
N. HDMI 3 (IN): Connect the HDMI output of a PC or an AV device via a HDMI cable.
*USB 3.0 port: A standardized port to connect a variety of devices like mouse, keyboard, and flash
drive. Support USB storage devices formatted with NTFS, FAT32 (32G) file system.
L
M
A
B
C
E
G
I
K
D
F
H
J
N

DK651DR5 User Manual 12
Operating Instructions
Powering On/Off the Display
To turn on/off the display, press the power switch on the side of the display as shown in the diagram
below.
ON
NOTE: The remote control only works
when the power switch is ON.
OFF

DK651DR5 User Manual 13
Using the Remote Control
When using the remote control, aim the remote at the IR receiver on the display. The IR receiver on
the DK651DR5 model is at the front of the display with a receiving angle of 100 degrees. The IR
receiver configurations of the model are shown in the figure below.
The operating range of the remote control is 2.5 meters (8 feet).
Ambient light may affect the performance of the remote control. Avoid fluorescent or neon lights in the
vicinity.
IR Receiver

DK651DR5 User Manual 14
*Color and shape may vary by model.
ITEM
DESCRIPTION

POWER
Power On / Off

MENU
OSD On / Off

UP
Move the cursor up or change the setting of selected item.

LEFT
Exit the current selection.

RIGHT
Select the highlighted item.

DOWN
Move the cursor down or change the setting of selected item.

OK
Enter (for DSM365 only)

BACK
Return to the last page. (for DSM365 only)









DK651DR5 User Manual 15
Navigating the On Screen Display (OSD) Menu
Press the MENU button on the built-in keypad or remote control to show the OSD. Use the
navigation arrows to select and adjust the menu items.
*The change of each setting can only enable when you press “LEFT” (refer to p.12) to back to the last
menu layer.
1. Input Source
ITEM 1
ITEM 2
DEFAULT
DESCRIPTION
Input Source
Main
HDMI 1
Set the Main input to display.
Failover 1
HDMI 2
Set the Failover 1 input to display.
Failover 2
DP
Set the Failover 2 input to display.
Failover 3
HDMI 3
Set the Failover 3 input to display.
Failover 4
DSM365
Set the Failover 4 input to display.
Failback
OFF
Set the time (hour),when the Input Source is
failover , it will redetection the Main Source
per few hour.
Command
Detection
OFF
Only effective in Main input source.
If the display didn’t get both commend and
the input signal, it will trigger the Failover1
function.
2. Picture

DK651DR5 User Manual 16
ITEM 1
ITEM 2
DEFAULT
DESCRIPTION
Picture
Color
Temperature
USER 2
Select the color temperature. (User2, User1,
D93, D65 and D55).
Red
100
Adjust the red light level. Range 0 –100.
Note: The feature is only supported on
User2 mode.
Green
100
Adjust the green light level. Range 0 –100.
Note: The feature is only supported on
User2 mode.
Blue
100
Adjust the blue light level. Range 0 –100.
Note: The feature is only supported on
User2 mode.
Contrast
60
Adjust the contrast level. Range 0 –100.
Gamma
Native
Adjusts the Gamma value. (Native, 2.2, 2.4
and sGamma)
Black Level
Limited
Selects the black level to adjust the screen
gray scale. "Limited" for video source uses
16 to 235 levels for R/G/B, such as HDMI.
"RGB Full" for video source uses all levels
from 0 to 255 levels.
"Auto" is for detecting the video source to
determine its value is applicable for
"Limited" or "RGB Full".
3. Brightness
ITEM 1
ITEM 2
DEFAULT
DESCRIPTION
Brightness
Auto Brightness
Off
A. If the AUTO BRIGHTNESS is “Off”, the
screen brightness will remain at HIGH
LEVEL brightness value.
B. If the AUTO BRIGHTNESS is “Auto”,
the brightness of display will be
adjusted according to the ambient light.
When ambient light is bright, the screen
will adjust to the High Level brightness
value set; when ambient light is dark,
the screen will adjust to the Low Level
brightness value set.
C. When the Timer (“High Level Time” &
“Low Level Time”) mode is set, the

DK651DR5 User Manual 17
display will automatically switch the
brightness according to the time set.
D. When setting “Mix” mode, Timer and
Light sensor will work at this mode.
For example, setting "High Level Time
= 8:00am" and "Low Level Time =
6:00pm", the light sensor will detect
environment brightness and then
display will adjust the value of High
Level during 8:00am and 6:00pm.
High Level
100
Adjusts the highest brightness level.
Range 0 –100.
Low Level
7
Adjusts the lowest brightness level.
Range 0 –100.
High Level Time
06:00
Set high level time.
Low Level Time
20:00
Set low level time.
Local Dimming
Local Dimmong2
Adjusts the contrast. UDR is the highest
contrast. Local Dimming 1 is the lowest
contrast.
(Local Dimming 1/2, UDR)
Auto Power
Control
Unlimited
Adjusts the Power Control(W).
Range 600~2700(300+) or Unlimited
4. Time
ITEM 1
ITEM 2
DEFAULT
DESCRIPTION
Time
Current Date
Set the date.
Current Time
Set the clock.
Note: The internal clock will continue to
function when the power is turned off.
Day of Week
Set the day of week. (Monday to Sunday)
Time Zone
Set the Time Zone.
Power Control
Timer
Off
Automatic power on / off schedule function.
On Time
06:00
Set turn-on time.
Off Time
00:00
Set turn-off time.

DK651DR5 User Manual 18
5. Advanced
ITEM 1
ITEM 2
DEFAULT
DESCRIPTION
Advanced
Display Mode
Auto
Change the Menu orientation. The Menu
can be displayed in either LANDSCAPE or
PORTRAIT mode.
Screen
Protection
Off
Turn on / off image burn-in protection.
Set image burn-in protection interval.
Range 0 –100 minutes.
IR Control
On
Enable/disable the remote control for Menu.
Note: When disabled, the remote control
function can be enabled again from
the control panel on the display or
through the DynaScan “Display
Manager” application.
AC Back Status
Power On
Choose to use the AC back status function.
Power On: Display booting up when the
power back after an outage.
Standby: Display keeps soft-off status when
the power back after an outage.
Memory: Display will back to the last state
when the power back after an
outage.
Volume
50
Set volume.
Range 100 –0.
Schedule Reboot
Off
Enable/disable the Schedule Reboot,
And set the Time.
Export & Import
Settings
Export or Import OSD Setting by USB.
Reset Default
Setting
Restore all settings to default.
Note: It does not modify CURRENT DATE,
CURRENT TIME, DATE OF WEEK,
TIME ZONE, POWER ON TIME and
POWER OFF TIME.
OSD Password
Protection
Off
Turn On:
Create Password > Confirm Password >
Password Protection On
Turn Off:
Enter Password > Password Protection Off