PAR EverServ 600 User manual

PAR Everserv 600 User Manual
www.partech.com
Thank You!
Thank you for purchasing the EverServ

designed for your environment, your
success is our passion.
1Examine The Shipment
Please ensure all
equipment is
present.
Report any missing
or damaged equip-
ment to your PAR
Salesperson or PAR
Channel Partner.
2Inventory Components
3pre-installation overview
Ensure you have the items
listed below in your order.
Power Supply
VESA Adapter Plate
(M6150-10 Model Only)
EverServ 600
Power Cord
(Packaged Seperately)


Inventory the equipment in your order.


Before installing your new EverServ
600 system, ensure certain pre-

to protect the equipment, the store,
and the employees. If you have any

guidelines, contact a PAR sales


network cabling, you may need to
contact an electrical contractor to
perform this work.
770506502

This material has been created in order to accommodate a wide range of
-

While ParTech, Inc. (“PAR”) takes great care to ensure the accuracy of these
materials, all material is provided “as is” without warranty of any kind,
-
-




-


-

form or by any means, electronic or mechanical, including photocopying,




table of contents


I/O Board


Maintenance & Support

Page 5
Page 6
Page 7
Page 10
Page 11

EverServ 600 Series Models
Model 6150
4GB Memory
Intel® Celeron processor
64GB SSD
15” Projec�ve Capaci�ve
Pedestal (Counter)
Model 6150-10
4GB Memory
Intel® Celeron processor
64GB SSD
15” Projec�ve Capaci�ve
VESA Bracket (Wall Mount)
I/O Ports Cover
Cable Well Cover

Power Indicator

removing terminal from box
Remove the terminal from the box by grasping the sides of the air cushioned

DO NOT 


Accessing the i/o well & Connecting Cables
connecting the power cable
Page 5
Remove the stand cover by
holding the terminal with
one hand and pulling the
bottom of the stand cover
by the cover hooks.
1
Connect your cables in the designat-
ed I/O ports and then route through
the terminal stand.
3
Remove the I/O cover by pressing the the two
tabs and pulling the cover straight up away
from the terminal.
2
Replace the I/O cover then the stand cover.
The stand cover should be replaced by rst
connecting the top tabs then pressing on the
bottom.
4
In order to power up the terminal you will
be required to connect the power the
cable.

Service & support


Page 6
123456810
7 9 11
1Cash Drawer
2USB 2.0
COM Ports 2x20 Display Power Connector LAN MSR, Biometric
Main i/o Board
Additional i/o
1 2
1SSD LAN
2COM1 (DB9)
3COM 2 (RJ45)
4COM 3 (RJ45)
52x20 Display
Only
6Power Input
7
8USB 2.0
9VGA
10 MSR
11 Audio
CAUTION BATTERY WARNING: 



•  

• The service related to human safety is not allowed because this device may have the possibility of the radio
interference.
•  

• The EverServ 600 series terminals are EMC compliant for Class “A” digital device business purposes. The

harmful interference in a commercial environment. Equipment is not intended for home use.
Safety

Everserv 600 MSR & Biometrics Reader

Remove the I/O cover by
pressing the two tabs and
pulling the cover straight
up away from the terminal.
Replace the I/O cover.
1Attach the MSR/Biometric Unit to the terminal
using the included screws.
2
Connect the MSR cable to the MSR
port on the I/O Board. Once
connected route the cable through
the cable clips.
3
Inventory Components
MSR Unit 
Philips Screws

Phillips head screwdriver
SOLD sepArately
NOTE: There are several op�ons for the MSR.
Your product may look different than the
image below.
Page 7

SOLD sepArately

Everserv 600 Customer Display

Customer Display 
Philips Screws
Inventory Components

Phillips head screwdriver
Remove the I/O cover by
pressing the two tabs and
pulling the cover straight
up away from the terminal.
1Attach the Customer Display to the terminal
stand using the included screws.
2
Depending on Customer Display use the
VGA, USB or COM 4 (2x20 Display) ports to
connect display to terminal.
3
Replace the I/O cover.
Before installing your new EverServ 600
customer display you may need to enable the
VGA 12v power. If you are installing the K6622,



Customer Display 12v Power Setup

Begin by powering up the terminal. When you see the
pineapple touch the screen.
1
When the PAR BIOS Extensions screen appears, press
“Setup” button.
2
When the PAR BIOS Setup screen appears, press the“Next
Item”button until the VGA Port +12v is selected.
3When the VGA Port +12v is selected, press the“+”to
Enable the 12v power.
4
Once you have enabled the 12v power, press the “Save”
button then press the“Ok” button that appears below.
5
Once you have Saved, press the “Exit” button then press
the “Yes” button that appears below. The terminal will
reboot and the display will be ready to use. 2nd screen
functionality will automatically be congured.
6

Everserv 600 VESA Adapter plate
K6150
VESA Adapter Plate
Inventory Components

Phillips head screwdriver
Remove the four screws connecting the stand
to the touch screen.
KEEP THESE SCREWS FOR RE-USE.
2
Using the four screws from the stand (Step
2) connect the VESA Adapter Plate to the
touch screen.
3
Remove the stand cover by
holding the terminal with
one hand and pull the
bottom of the stand cover
by the cover hooks.
1
The terminal is now ready to be wall or pole
mounted to customer provided mount.
Page 10

Routine maintenance

• Do Not use equipment in direct sunlight or outdoors where exposed to weather and other natural elements.
• Never allow a unit to drop
• Never allow napkins, boxes, or other objects to block air vents on the printers, videos, PCs, or registers. These

• Make sure nylon or rubber grommet (washer) protects each hole punched through the
counter top and other metal surfaces. Metal edges may cut through cables.
• Never break open a roll of coins by striking it against the cash drawer.
• Never switch a cash drawer with any other housing (case). The cash drawer and its housing are a matched
set.


• Never unplug a unit when the power switch is on.
Care of equipment
Care of equipment


2. Dampen a clean towel with carbonated water. Make sure the towel is damp, not saturated. Do not use
ammonia based cleaning products.


Cleaning Equipment
WARNING: Never use abrasive materials to clean the touch screen on a register.
A scratch on the surface could disable the register, and result in costly repairs.
For Service:


Parts:


Support Information
Driver Support:
support.partech.com
 770506502