Dynex DX-FANT12-A User manual

DX-FANT12-B / DX-FANT12-G /
DX-FANT12-O / DX-FANT12-A
9" Personal Fan
Thank you for purchasing this Dynex Personal Fan.
Package contents
• 9" personal fan
• Quick Setup Guide
Important safety instructions:
PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS
To ensure the best performance from your fan, please read and save the
following instructions.
WHEN USING ELECTRICAL APPLIANCES, BASIC PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND
INJURY TO PERSONS, INCLUDING THE FOLLOWING:
• Read all instructions before using this product.
• Use this fan only as described in this Quick Setup Guide. Any other use not
recommended by the manufacturer may cause re, electrical shock, or
injury to person, and may void the warranty.
• Always unplug the unit before assembling, disassembling, or cleaning.
• Always unplug unit when not in use, when moving from one location to
another, and before cleaning.
• To disconnect, grip the plug and pull it from the wall outlet. Never yank
the cord.
• The use of attachments not recommended or sold by the appliance
manufacturer may cause hazards.
• Avoid contact with moving parts.
• DO NOT operate this fan with a damaged cord or plug, after a malfunction,
or is dropped or damaged in any manner. Discard fan or return the unit to
Best Buy, Inc. for examination, electrical or mechanical adjustment, or
repair.
• Do not operate this fan in the presence of explosive and/or ammable
fumes.
QUICK SETUP GUIDE
• Do not place the fan or any parts near an open ame, or cooking or other
heating appliance.
• Extreme caution is necessary when the fan is used by or near children or
invalids and whenever the fan is left operating and unattended.
• This product is intended for household use only and not for commercial
or industrial use. Do not use outdoors.
• Always use on a dry level surface.
• Do not operate if the fan housing is removed or damaged.
• A loose t between the AC outlet and plug may cause overheating of the
plug. Have a qualied electrician replace the outlet.
• This product employs overload protection (fuse). A blown fuse indicates
an overload or short-circuit situation. If the fuse blows, unplug the
product from the outlet. Replace the fuse as per the user servicing
instructions (follow product marking for proper fuse rating) and check
the product. If the replacement fuse blows, a short-circuit may be present
and the product should be discarded or returned to an authorized
service facility for examination and/or repair.
• DO NOT run cord under carpeting. Do not cover cord with throw rugs,
runners or the like. Do not route cord under furniture or appliances.
Arrange cord away from trac area and where it will not be tripped over.
• This fan is equipped with a polarized alternating current line plug (a plug
having one blade wider than the other). To reduce the risk of electric
shock, this plug ts into the polarized power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to t, contact a qualied
electrician to replace the obsolete outlet. Do not attempt to defeat the
safety feature.
• NEVER connect the fan to any power sources other than a 120 volt
alternating current polarized outlet.
• Warning: To reduce the risk of electric shock. DO NOT use this fan with
any solid-state speed control and DO NOT insert a nger or any object
into grill.

Operating instructions
1Carefully remove your fan from the box (save the carton for o-season
storage).
2Make sure that the switch is in the OFF position before plugging the fan
into the outlet.
3Place the fan on a rm level surface.
4Plug the power cord into any standard 120V,AC, 60Hz outlet.
5Turn on the switch located on the back of the fan. Slide the switch to set
the speed you desire.
Cleaning/maintenance instructions
During season care:
• Before cleaning, be sure to turn o and unplug the fan.
• Keep the fan clean. Carefully wipe the fan with a soft, damp cloth. Be very
cautious near the motor.
• DO NOT immerse the fan in water and never allow water to drip into the
motor housing.
• Never use gasoline, benzene, or thinner to clean the fan. This will damage
the surface of the fan.
• After cleaning, be sure to completely dry the fan with a cloth or towel.
After season care:
• Your fan can be stored in the o-season.
• Before putting the fan in storage, clean it thoroughly, cover it with a vinyl
bag, and store it in a cool and dry place. We recommend using the original
(or appropriately sized) box.
User servicing instructions
1Grasp the plug and remove from the outlet.
Do not unplug by pulling on cord.
2Open the fuse cover by using your nger
and thumb to slide the fuse access cover
away from the cord.
3Remove the fuse by carefully prying it out.
Warning: Risk of re. Replace fuse only with
5 Amp, 125 Volt fuse.
4Close the fuse access cover on top of
attachment plug by sliding it toward the cord.
Warning: Risk of re. Do not replace the
attachment plug. It contains a safety device
(fuse) that should not be removed. Discard the
product if the attachment plug is damaged.
One-year limited warranty
For complete warranty, visit www.dynexproducts.com.
Contact Dynex
For customer service call 1-800-305-2204
www.dynexproducts.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richeld, MN USA 55423-3645
© 2012 BBY Solutions, Inc., All Rights Reserved.
DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and
brand names are trademarks of their respective owners.
OPEN
CLOSE
ENGLISH 12-0232