dyras HM751-G User manual

Kezelési útmutató Kézimixer– HU
Model: HM751-G
220-240V 50/60Hz 200W
5 sebesség
FONTOS UTASÍTÁSOK
A KÉSZÜLÉK ELSŐ HASZNÁLATA ELŐTT
OLVASSA EL A TELJES ÚTMUTATÓT!

2
Megjegyzés:
* Krjk, hasznlatba vtel eltt gondosan tanulmnyozza
t, s kvesse ezt a kezelsi tmutatt. Fontos, hogy
rizze is meg a kezelsi tmutatt, hogy idnknt - vagy
brmely ktelye esetn - jra elvehesse s
feleleventhesse a hasznlati tudnivalkat, ezltal
mindenkor ki tudja majd hasznlni a kszlk sszes
szolgltatst. Amennyiben a kezelsi tmutatban
foglalt elrsok be nem tartsa miatt kvetkezik be a
termk esetleges meghibsodsa, gy az ebbl fakad
krokra a gyrtfelelssget nem vllal. Amennyiben a
termk esetleg meghibsodna a rendeltetsszer
hasznlat sorn, gy krjk, csak a hivatalos
szakszervizzel javttassa!
Fontos biztonsági tudnivalók
* Ha a kszlket felgyelet nlkl hagyja, sszeszerels,
sztszerels vagy tisztts eltt mindig hzza ki a
hlzatbl.
* A kszlket gyermekek nem hasznlhatjk! Tartsa a
kszlket s vezetkt gyermekektl elzrva.
* A kszlket csak azon cskkentett mentlis vagy fizikai
kpessgszemlyek hasznlhatjk, akik megfelel
felgyelet alatt vannak vagy megfelel tmutatst kaptak
a kszlk biztonsgos hasznlathoz.
* Gyermekek nem jtszhatnak a kszlkkel.
* Ha a tpkbel srlt, akkor a veszly elkerlse
rdekben a gyrtt, a szervzzel fel kell vennie a
kapcsolatot, a srlt, vagy nem jl mkdkbelt ki kell
cserlni a veszly megelzse vgett.
* Kapcsolja ki a kszlket majd hzza ki a
hlzatbl, mieltt kicserln a tartozkokat vagy
tiszttan.

3
* Az lelmiszerekkel rintkezsbe kerl felttelek
tiszttsval kapcsolatos tmutatsoknak ksznheten
olvassa el az „Ápols s tisztts” fejezetet.
* Ez a kszlk hztartsi s hasonl clokra
szolgl, pldul:
–Üzletek szemlyzeti konyhjban;
–az gyfelek ltal a szllodkban, motelekben s ms
lakossgi tpus krnyezetekben;
–Sajt hztartsban valhasznlatra.
A kszlk csak az itt lert hztartsi hasznlatra
szolgl, minden egyb (iparszer) felhasznls nem
megengedett.
* A kszlk biztonsgos zemeltetse rdekben
csak a kezelsi tmutatban megadott informcik
szerint szerelje ssze, majd csatlakoztassa s a
hasznlati alapjn hasznlja.
* Tiszttskor ne hasznljon semmilyen ers tiszttszert a
kszlken.
* Hasznlat kzben hagyjon elg lgterletet a kszlk
krnykn. Ne hagyja, hogy a kszlk hozzrjen
fggnykhz, falhoz, rongyokhoz.
* Hzza ki a hlzati kbelt a fali aljzatbl ha:
–Problma lp fel a hasznlat sorn
–Amikor a termk nincsen hasznlatban
–Tiszttsa kzben
* Ne rintse a mozg alkatrszeket mkds kzben.
* A gyrt ltal nem ajnlott vagy nem a gyrt ltal
eladott kiegsztk hasznlata tzet, ramtst vagy
srlst okozhat.
* Ne hzza a csatlakozkbelt les szleken keresztl, a
kbelt ne rintkezzen forrfellettel (belertve a stt) s
ne hasznlja rajta.

4
* A csatlakozkbel ne legyen nylt tz vagy
fttt fzlapok kzelben.
* A kszlk javtst bzza a gyrt ltal
kijellt szakszervzre.
* A termket motorjt soha ne rje vz,
kszlket maximum enyhn nedves
ronggyal tiszttsa.
* Soha ne rjen a keverkhz amg be van dugva a
hlzatba a kszlk.
* Ne hasznlja a termket olyan hosszabbtval, amit nem
ellenrztt egy hivatalos szakember.
* Ne hasznlja a kszlket semmilyen ms fajta
hasznlatra, mint amire gyrtva lett.
* Tartsa tisztn a krnyezett! Az elhasznldott kszlk
szilrd lakossgi hulladkkal egytt nem helyezhet el.
Krjk a termket lettartama vgn adja le a
lakhelyn illetkes elektromos kszlkek begyjtsre
szakosodott szervezetnl.
* A kszlket maximum 5 percig hasznlja
folyamatosan, utna hagyja a motort pr percig hlni.
Alkatrészek azonosítása
Leírás:
1. Motoregysg
2. Kiold gomb
3. Sebessg llt s kikapcsol gomb
4. Tpegysg bemenet
5. Habver bett
6. Dagaszt bett

5
Útmutatás a kézimixerhez
Sebesség
Leírás
1
WHIP
Tejsznhabhoz
2-3
CREAM
Krm, vaj s cukor tejsznestshez
4
BLEND
Folykony sszetevk sszekevershez, pldul:
saltantetekhez
5
FOLD / MIX
Ez a sebessg mlesztett vagy szraz telekhez,
pldul: liszthez (legfeljebb 1376g, 800g liszt s 576g
vz megosztsban), vajhoz s burgonyhoz, valamint
stemnykehez s tojs versre
Megjegyzs: Hasznlja a habver betteket a vastag ragacsos
sszetevk kevershez. Hasznlja a villkat a tojs felvershez.
A KÉZI KEVERŐ HASZNÁLATA
1. Helyezze be a habver vagy
dagaszt
betteket a keverk
bemeneti nylsba
2. Dugja be a kszlket a hlzatba
3. Fogja meg a kszlk fogantyjt s
engedje bele a keverket az
alapanyagokba
4. Kapcsolja be a kvnt sebessgi fokozatra
5. Amikor vgzett a keverssel helyezze 0-s sebessgre
6. Vrja meg amg a kever bettek befejezik a forgst, majd a
kiold gomb tudja kiszedni a kever betteket a kszlkbl
7. Hzza ki a termket a hlzatbl amikor vgzett a hasznlatval.
Tiszttsa meg a keverket vzzel, trlje ket szrazra, majd
trolja vztl tvol, szraz helyen

6
Tisztítás
1. A kszlket ne helyezze vz al, csak szraz ronggyal tiszttsa
2. A keverket a kszlkbl kiszerelve moshatja vz alatt.
3. Szrazon trolja ket
Mszaki adatok
Dyras HM-751-G Kzimixer
Nvleges feszltsg: 220-240V
Nvleges frekvencia: 50/60Hz
Nvleges fogyaszts: 200W
Érintsvdelmi osztly (ramts ellen): II
Gyrt: Vrsk Kft.
A CE SZIMBÓLUM
A biztonsg s az elektromgneses sszefrhetsg (EMC)
szempontjbl a kszlk megfelel az elrsoknak.Az erre utal
jells „CE” a kszlk adattbljn, a csomagoldobozon s a
kezelsi tmutatban tallhat.
Hasznlt elektromos s elektronikus
berendezsek megsemmistse
Ez a jelzs a termken s a csomagolson azt jelzi,
hogy tilos hztartsi hulladk kz dobni a mr nem
hasznlt termket mivel kifejezetten krnyezet
szennyez. Tovbbi rszletekkel kapcsolatban
rdekldjn a helyi hatsgnl.
Ez a jelzs az Eurpai Uniteljes terletre rvnyes.
Amennyiben az Eurpai Unin kvl szeretn
megsemmisteni a termket rdekldjn az ezzel
kapcsolatos szablyzsokrl a helyi hatsgnl.

7
TISZTELT VÁSÁRLÓ
* Felhvjuk figyelmt, hogy a kszlk lettartamra,
hasznlhatgra az albbi zemeltetsi, illetve trolsi,
krnyezeti behatsok, krlmnyek kihathatnak, s krosan
befolysolhatjk, lervidthetik azt, amennyiben tartsan
fennlnak s nem csak tmeneti jellegek. Mindig vja meg a
kszlket a felsoroltaktl:
* A nedves, prs, dohos krnyezetben val hasznlat vagy
trols okozhatja:
−a kszlk burkolatnak, elektromos szigetelsnek
meggyenglst, id eltti regedst,
−manyag s gumi szerkezeti komponenseinek id eltti
elhasznldst, elregedst,
−illetve elsegtheti, felgyorsthatja elektromos egysgeinek,
vezetkeinek oxidcijnak, fm alkatrszeinek korrzijt.
* A poros lgter, vagy konyhai hasznlat (ahol a lgtrben
(pl. tolaj vagy fzzsr prja terjeng) okozhatja:
−Zsros porbevonat lelepedst a kszlk szerkezeti
mechanikus s elektromos egysgein, valamint burkolatn,
mely elektromos rintkezsi hibt, akr teljes
mkdskptelensget is okozhat, illetve a plasztik s gumi
alkatrszeket krosthatja.
* A kszlket r kzvetlen napfny okozhatja:
−A kszlk burkolatnak, illetve plasztik s gumi alkatrszek
ideltti elregedst, szilrdsgnak s egyb szerkezeti
jellemzinek krosodst, felletk porzuss, trkenny
vlst, mely a rendeltetsszer, biztonsgos hasznlatot
veszlyeztetheti.
* Folyamatos, ipari jelleg hasznlat okozhatja:
−A kszlk forszrozott zemeltetsbl ered, id eltti
szerkezeti kopsait, a motor id eltti elhasznldst,
krosodst a folyamatos zemeltetsbl eredkopsok s
tlhevls miatt.

8
* Fagyos, hideg krnyezetben val kszlktrols okozhatja:
−Plasztik s gumi alkatrszek szerkezeti krosodst,
trkenny vlst, mely a rendeltetsszer, biztonsgos
hasznlatot veszlyezteti,
−pralecsapdsbl ered oxidcit, a kszlk fm
alkatrszeinek korrzijt
* Sugrz vagy kzvetlen hhats okozhatja (mint pldul
nem megfelel tvolsg biztostsa a tzhelytl, fttesttl)
−plasztik s gumi alkatrszek, burkolati elemek szerkezeti
krosodst, alakvltozst, deformcijt, kilgyulst,
megolvadst, elektromos szigetelsek meggyenglst.
* A kszlk lettartamnak megnvelse s a szakszertlen
hasznlata elhrtsa rdekben kerlje el, illetve akadlyozza
meg a fenti krlmnyek kialakulst s tartsa be minden
esetben a termkre vonatkoz zemeltetsi elrsokat, mivel
ellenkez esetben szakszertlen zemeltetst valst meg,
melyre a gyrt felelssget nem vllal. Javasoljuk, hogy
idszakonknt vizsgltassa fell egy meghatalmazott
szakszervzben a kszlkt mg akkor is, ha egybknt
hibajelensget nem tapasztal.
−ezzel idejekorn elhrthat egy kezdeti stdiumban lvhibt
is, s gy a termke lettartamt nvelheti.

9
INSTRUCTION MANUAL for Hand mixer
Model: HM751-G
220-240V 50/60Hz 200W
5 speed setting
INSTRUCTION FOR USE
PLEASE RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.

10
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic safety precautions
should always be followed including the following:
* Read all instructions carefully before you use the
appliance.
* Always disconnect the appliance from the supply if it is
left unattended and before assembling, disassembling or
cleaning
* This appliance shall not be used by children. Keep the
appliance and its cord out of reach of children.
* Appliances can be used by persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the appliance
in a safe way and if they understand the hazards involved.
* Children shall not play with the appliance.
* If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
* Switch off the appliance before changing accessories or
approaching parts which move in use.
* This appliance is intended to be used in household and
similar applications such as:
–staff kitchen areas in shops, offices and other working
environments;
–farm houses;
–by clients in hotels, motels and other residential type
environments;
–bed and breakfast type environments.
* Do not allow children to use the hand mixer without
supervision.
* To protect against risk of electrical shock do not put the

11
hand mixer into water or other liquid.
* Do not operate the hand mixer with wet hands.
* Unplug from outlet when not in use, before putting on or
taking off parts, and before cleaning.
* Keep hands, hair, clothing, as well as spatulas and
other utensils away from the beaters during operation to
reduce the risk of injury to persons, and/or damaged to the
mixer.
* Remove beaters from the hand mixer before washing
them.
* Do not continuously operate the mixer too long. The
motor may overheat. The continuous operating time must
be less than 5 minutes.
* Do not use the appliance to mix too stiff or too sticky
ingredients.
* The use of attachments not recommended or sold by
the manufacturer may cause fire, electric shock or injury.
* Do not let cord contact hot surface, including the stove.
* Do not let cord hang over edge of the table or counter.
* Do not operate the appliance with a damaged cord or
plug or after the appliance malfunctions, or is dropped or
damaged in any manner. Return appliance to the nearest
authorized service facility for examination, repair or
electrical or mechanical adjustment.
* Do not put it in water.
* Do not use outdoors.

12
Description:
1. Main Body
2. Ejector Knob
3. Speed Control
4. Power Cord Assembly
5. Muddler (optional)
6. Fork (optional)
MIXING GUIDE
SPEED
DESCRIPTION
1
WHIP
For cooked icings, whipping cream. etc
2-3
CREAM
For creaming butter and sugar. Beating uncooked candy.
desserts. etc.
4
BLEND
Best speed to start liquid ingredients for mixing salad
dressings.
5
FOLD or MIX
This is a good starting speed for bulk and dry foods such
as flour (Maximum 1376g, proportion: 800g flour per 576g
water), butter and potatoes, and for mixing cakes, cookies
and quick breads, and for beating eggs.
Note: Use the muddlers to mix thick sticky ingredients. Use the forks
to beat eggs.

13
USING YOUR HAND MIXER
1. Fit the Forks (6) or Muddlers (5) to the beater hole
Beater Holes.
2. Plug in the appliance.
3. Hold the mixer handle. Lower the
Forks or Muddlers into ingredients.
4. Switch on (3) and select the speed desired. The mixer begins to
mix the ingredients in the bowl.
5. When you have finished mixing, stop the mixer by pushing the
speed button to “0” immediately.
6. Wait until the Forks or Muddlers have stopped revolving; press
the Ejector Knob (2) to remove the Forks or Muddlers. “Switch
off the appliance before changing accessories or approaching
which move in use.”
7. Unplug the appliance when you have finished mixing. Clean the
Forks and the Muddlers with water. Make them dry, store in the
box together with the main body.
CLEANING
1. Do not put the main body into water, only clean it by dry cloth.
2. Wash the Forks and the Muddlers with water after using.
3. Make them dry with cloth, store in the box.
WARNING:
Any other servicing should be performed by an authorized service
representative.

14
TECHNICAL SPECIFICATIONS
Model: HM751-G
Rated voltage: 220-240V
Rated frequency: 50 / 60Hz
Rated power consumption: 200W
Protection class (against electric shock): CLASS II
Manufacturer: Vrsk Kft.
Correct Disposal of this product
This marking indicates that this product should not be
disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of
material resources. To return your used device, please
use the return and collection systems or contact the
retailer where the product was purchased. They can take
this product for environmental safe recycling.

15
DEAR CUSTOMER
* Please note that the following operating, storage,
environmental, and environmental conditions may affect
the lifetime and usability of the device, and may adversely
affect, shorten, or prolong its life if not permanently or
temporarily.Always protect your device from the following:
* Use or storage in a humid, damp environment may
cause:
−premature aging of the device’s enclosure, electrical
insulation,
−premature wear and aging of the structural components
of plastics and rubber
−Improve, accelerate the corrosion of electrical units,
wires oxidation, metal parts.
* Use in dusty environments or in kitchens (where the
atmosphere is exposed to, for example, cooking oil or
cooking fat) may cause:
−Deposition of greasy powder coating on the mechanical
and electrical components and casing of the unit, which can
cause electrical contact failure, even total malfunction,and
damage to plastic and rubber components.
* Direct sunlight can cause:
−Premature aging of the device casing, plastic and rubber
parts, deterioration of strength and other structural
features, porosity and brittleness of their surface, which
may endanger proper, safe use.
* Continuous industrial use may cause:
−Premature structural wear due to forced operation of the

16
device, premature engine wear, damage due to continuous
wear and overheating.
* Device storage in freezing cold conditions may cause:
−Structural damage or breakage of plastics and rubberparts
which endangers the intended safe use,
−Oxidation due to condensation, corrosion of metal parts
of the device.
* Can be caused by radiation or direct heat (such as
providing an inappropriate distance from the stove,
radiator):
−structural damage, deformation, deformation, softening,
melting, weakening of electrical insulation of plastic and
rubber parts, coverings.
* To prolong the life of the device and prevent improper
use, avoid or prevent the above conditions and always
follow the product operating instructions, otherwise you
will be responsible for improper operation for which the
manufacturer assumes no responsibility. We recommend
that you have your appliance periodically inspected by an
authorized service center, even if you do not experience
any malfunctions, as this may help you troubleshoot an
early stage problem and increase the life of your product.

Copyright ©2021 The dyras wwe.factory LLC U.S.A.
No parts of the content (including logos, design,
photos, text, colour scheem arrangements, etc.) may
be reproduced, resued or redistrubuted for any purpose
whatsoever, or distributed to a thirdparty for such
purposes, without the written permission of The dyras
wwe.factory LLC.
®= registered trademark of Dyras Europe Kft.
Table of contents
Languages:
Other dyras Hand Mixer manuals