Dyson lightcycle morph User manual

Take full control with the Dyson Link app.
Get step-by-step set up and support.
Control how and when your Dyson Light
operates.
Download the Dyson Link app
Download the Dyson Link app from the App store
or Google Play.
Open the app and follow the on-screen instructions
to create a new account.
For further information and support:
https://www.dyson.com.sg/support/contact-us
1800 3976674
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S.
and other countries. App Store is a service mark of Apple Inc., registered in the
U.S. and other countries.
Google Play and the Google Play logo are trademarks of Google Inc.
The Bluetooth® word mark and logos are registered trade marks owned by
the Bluetooth SIG, Inc. and any use of such marks by Dyson is under license.
Thank you for choosing
to buy a Dyson Light
Activating your guarantee
We don’t stop caring about our
machines once they’re yours.
Even after your guarantee has
ended, we’ll still be on hand to help.
Your serial number can be found
on the rating plate located on the
bottom of your light.
Note your serial number for future
reference.
This illustration is for example purposes only.
2

3
Assembling your light
We’ve engineered the box to
help you assemble your light.
Lift the base and place
vertically in the slot in the box.
Insert the main body into the
hole in the top of the base,
making sure it’s level.
Insert the locking nut into the
bottom of the base. Turn it
clockwise until tight.
Insert the power cable into the
base, making sure it sits in the
cable guide.
Remove any protective
wrapping from your light.
Plug in and switch on.
Download the Dyson link app
and add your light.
Power Brightness
Settings
Colour
temperature
Positioning your light
You can easily change the position of your light by independently
rotating the optical head, arm and stem up to 360°.

4
Swipe to change the colour
temperature of the light
from warm through to cool.
The light will adjust to
background light conditions and
keep the workspace at a constant
brightness.
Automatically changes
the brightness and colour,
according to your geographical
location, throughout the day
when connected by Bluetooth®
wireless technology to the
Dyson Link app.
Colour temperature
and brightness
Settings
Swipe to change the
brightness of the light.
Tap to change quickly
between brightness levels.
The light will turn off after five
minutes if no movement is detected.
Tap to change quickly between
colour temperatures.
For more information about using your light
without connecting to the Dyson Link app:
http://dyson.com/mylcm
To find out more about colour temperature
and brightness levels, and to get the best
from your light, go to the Dyson Link app or
online at: http://dyson.com/mylcm

5
Disabling/Enabling Bluetooth®
wireless technology
USB-C charging point
Your light has Bluetooth® wireless
technology enabled by default.
Press and hold the middle button until
the LED lights on the three buttons blink.
The main light source will turn off and
then on again to show that Bluetooth
has been disabled.
To re-enable Bluetooth, repeat the
instructions above. The main light
will blink twice to show that Bluetooth
has been re-enabled.
Plug in your mobile devices
to charge up to 1.5A at 5V.