E.C. Woods Acadia User manual

Assembly Instructions E.C. Woods, Inc. Outdoor Furniture
PARTS INCLUDED: 2 –Side Assemblies, 1 –Seat, 1 –Back Stretcher (1 3/4”x15 7/8”), 2 –Seat Skirts w/pocket holes (2 5/8”x15 3/4”), 1 - Front
Stretcher (2 5/8”x15 3/4”), 3 –Back Supports (2 5/8”x14 5/8”), (Opt) 2 –Arm Assemblies
HARDWARE INCLUDED: 10 –1 ½” Pan Head and 10 –2” Countersunk Head Stainless Steel Screws
STEP 1: Lay all pieces on smooth, soft surface, such as cardboard, to avoid scratching.
SIDE ASSEMBLY SEAT ASSEMBLY 14 5/8” LONG BACK SUPPORTS
15 3/4” LONG BACK AND FRONT STRETCHERS, AND (2) SEAT SKIRTS OPTIONAL ARMS
STEP 2: (a) Use a soft hammer (if necessary) to insert Back Supports and Stretchers in to Side Assembly. (b) Place the other Side Assembly on
top of the Back Supports and Stretchers, starting at the top, use a soft hammer (if necessary) to seat the Side Assembly onto the Back Supports
and Stretchers making sure that it is tight. (c) Secure the Side Assembly to the Stretchers using (3) –2” screws. Flip chair over and secure the
other side using (3) –2” screws.
(a) (b) (c)

STEP 3: (OPT ARMS) (a) Fasten the Arm Assembly to the back leg thru the pocket hole in the Arm Assembly into the predrilled hole in the leg
using 1 –1 ½” screw. (b) Line the top of the arm support up with the top of the side seat skirt and (c) secure with 2 –2” screws thru the
predrilled holes. (x2)
(a) (b) (c)
STEP 4: (a) Place the seat onto the chair base being sure to have the pocket holed side down. Push the seat all of the way up against the back
legs. (b) Center the front of the seat and then secure it to the seat skirts with 8 –1 ½” screws thru the pocket holes in the seat skirts (DO NOT
OVER TIGHTEN).
(a) (b)
STEP 5: Enjoy your new Acadia Chair
Arm Chair ecwoutdoorfurniture.com Side Chair