Earlywood Fruit Presser User manual

Instruction Manual - Fruit Presser
Congratulations on your purchase from
Primrose! Now, let’s set it up ready to press
your favourite fruit!
Parts List：
A (Stand and juice collecting bowl) B (Nut for handle) C (Connecting rod)
D (Pressure Plate) EX2 (Hoop) F (Pressing Cage)
Gx2 (Wooden Plate) H (Wooden Plate) Ix2 (Wooden Cross Bar)

J (Plastic Ring) K (Juice Bag) L (Stainless Steel Screw)
M (Centre Rod) N (Centre Rod)
Assembly：
1. Part E and Part F, before being assembled, all pressing cages with bevel edge
should be set in one direction whilst the smooth edge must be in-line on the opposite
side
When assembly is finished, all pressing cages with smooth edge should be placed upon
flat platform to make sure all blocks are kept in lineand with the same height, to make
sure it’s smooth and steady when placed in the round base.

2. Part D and Part H assembly
3. Part M and Part N should be assembled first, then to be screwed to A
4. When pressing fruit, put the assembled pressing cage with bevel edge upwards on the
assembled Part A and cover with Part K.
5. Put the chopped fruit into the barrel, then place Part G & Part I in sequence, after that,
place assembled Part D & Part H in it.

6. Part J should be placed in the pressure plate first, then screw on Part B, after that, insert
Part C into the hole of Part B. Fruit can be pressed when rotating Part C in clockwise
direction.