East West Furniture XT60 User manual

X-Style36X60inDiningTable
-1-
ASSEMBLYINSTRUCTIONS
SKU: XT60
Description:X-Style 36X60 in DiningTable
Product Dimension:60"W x36"Dx30"H
CubeSize:62.9IN x38.9INx3.5INNW:61.6 LBS
(TOP)GW:70.4LBS
CubeSize:35.3IN x3.9IN x1.5 INNW:4.4LBS
(CROSSBAR)GW:5.5 LBS
CubeSize:36INx32 INx5.3 IN NW:19.8 LBS
(LEG)GW:25.3LBS
BEFOREASSEMBLY
Thankyouforpurchasingthisqualityproduct. Thisproducthasbeendesignedforeasyassembly and constructedfordurability.Pleasetakethetimetoreadand
followthe assembly instructionscarefully.
Be suretocheck allpackingmaterialcarefully forsmallpartswhichmayhave comelooseinsidethecartonduringshipment. Pleaseseparate,identify,and count
allpartsandmetalhardware.Compare with partlistto be sure allpartsare present.
If hardwareismissingoryouhave difficultyassemblingthisproduct,pleasecallforus.
175SouthbeltIndustrialDr,
Houston,TX77047
Email:[e-mail]

X-Style36X60inDiningTable
-2-
IMPORTANT NOTE:
-Place all woodenpartsona cleanandsmooth surface suchasarugorcarpetto avoidthe partsfrombeingscratched.
-Remove all wrappingmaterial,includingstaples&packingstrapsbefore youstartto assemble.
-DONOTtightenall screwsand boltsuntilcompletelyassembled.
-Keepallhardware partsoutof reach of children.
PARTLIST
Whenunpacking, please be carefulnotto discardanypartswith the packaging.Before continuing,please make sureyouhave thefollowingparts:
NO Description Qty Sketch NO Description Qty Sketch
A Top 1 B Table Leg 2
C Cross bar 1 D Snapleg 2
HARDWARELIST
Whenunpacking, please be carefulnotto discardanypartswith the packaging.Before continuing, please make sureyouhave all ofthefollowinghardware:
NO Description Qty Sketch NO Description Qty Sketch
1 Bolt
(M6x50) 16 2 Lockwasher
(Φ6.5xΦ9mm) 12
3 FlatWasher
(Φ6.5xΦ19mm) 12
4 Allenkey
(M4mm) 1
STEP1
Attach legs (B)tothe Cross bar(C) withBolts (1).Tighten withthe Allen Key(4).
Note:DONOTtightenanyof the bolts,until thetable isassembled.

X-Style36X60inDiningTable
-3-
STEP2
Attach legs (onthe Step1)totheTop (A)with Bolts (1)and washers(2), (3). Tighten withtheAllenKey(4).
Note:Tightenthe all boltsontheStep 1.Then Attach Snaplegs (D)tothe Legs.