East West Furniture AMS030 User manual

AMHERST SWIVEL BACKLESS BARSTOOL 30” SEAT HEIGHT
- 1 -
ASSEMBLY INSTRUCTIONS
SKU: AMS030
Description: AMHERST SWIVEL BACKLESS BARSTOOL 30” SEAT HEIGHT
Product Dimension: 1”Wx 1"Dx30”H
Cube Size : 27.3” x17.7”x12.5”
NW : 19. LBS
GW : 3.1 LBS
175 Southbelt Industrial Dr,
Houston, TX 77047
Email:[e-mail]

AMHERST SWIVEL BACKLESS BARSTOOL 30” SEAT HEIGHT
- 2 -
BEFORE ASSEMBLY
Thank you for purchasing our product. This product has been designed for easy assembly and long
lasting use. Please take the time to read and follow the assembly instructions carefully
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment.
Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being
scratched.
-Remove all wrapping material, including staples & packing straps before you start to assemble.
-DO NOT tighten all screws and bolts until completely assembled.
-Keep all hardware parts out of reach of children.
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have the following parts:
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have all of the following hardware:
NO Description ty Sketch NO Description ty Sketch
A
Seat Cushion 1
B
Footrest 1
C Leg 4
HARDWARE LIST
NO Description ty Sketch NO Description ty Sketch
1
Bolt
(M6x40mm)
2
Lock Washer
(
∅
6.5x9)
3
Flat Washer
(
∅
6.5x19)
4
Allen Key
(4mm)
1
ASSEMBLY TOOLS RE UIRED
NOT INCLUDED

AMHERST SWIVEL BACKLESS BARSTOOL 30” SEAT HEIGHT
- 3 -
Attach Two Legs (B) to the Seat cushion (A) by using bolts (1) and washers (1), (2). Tighten with Allen
Key (4).
Note: DO NOT tighten any of the bolts, until the chair is assembled.
STEP 2
Attach Footrest (B) to the Legs. Use bolts (1), washers (2) and (3).Tighten with Allen Key (4).
STEP 1

AMHERST SWIVEL BACKLESS BARSTOOL 30” SEAT HEIGHT
- 4 -
Attach the other two legs (D) to Footrest (B) and Seat cushion (A) Use bolts (1), washers (2) and
(3).Tighten with Allen Key (4).
Put the chair on a flat level surface to make sure the chair is level and then tighten the all bolts.
STEP 3
STEP 4
CAUTION: Do
not put fingers