East West Furniture KDF User manual

- 1 -
Kendall Fabric Bed (Full-Queen)
ASSEMBLY INSTRUCTIONS
SKU: KDF
Description : Kendall Fabric Bed (Full-Queen)
Product Dimension : 59”W 83.6”L 47”H
(FULL BED)
Cube Size : 61” 41,7” 6.6” NW: 95.7 LBS
GW: 103.4 LBS
Product Dimension : 65”W 88.7”L 47”H
(QUEEN BED)
Cube Size : 66.8” 41.7” 6.6” NW:105.6 LBS
GW: 114.4 LBS
175 Southbelt Industrial Dr,
Houston, TX 77047
Email:[e-mail]

- 2 -
Kendall Fabric Bed (Full-Queen)
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for
durability. Please take the time to read and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment.
Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being
scratched.
-Remove all wrapping material, including staples & packing straps before you start to assemble.
-DO NOT tighten all screws and bolts until completely assembled.
-Keep all hardware parts out of reach of children.
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have the following parts:
NO Description Qty S etch NO Description Qty S etch
A Side rails 2 B Side rails 2
C Headboard 1 D Footboard 1
E Leg 4 F Slats 2
G Center suport
Leg 2
H Horizontal
support frame 1
K U-bracket 1 L Center
Support Rail 2
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have all of the following hardware:
NO Description Qty S etch NO Description Qty S etch
1 Medium bolt
(M8 20mm) 8
2 Short bolt
(M6 15mm) 16
3 Long bolt
(M6 30mm) 5
4
Large lock
washer
(Φ8.5 Φ13mm)
8
5
Large flat
washer
(Φ8.5 Φ19mm)
8 6 Allen key 1
BEFORE ASSEMBLY
HARDWARE LIST

- 3 -
Kendall Fabric Bed (Full-Queen)
Attach the legs (E) to the bottom of the headboard (C). as shown below.
Attach the legs (E) to the bottom of the footboard (D).as shown below.
Assemble the left side rails by joining the (A) & (B) side rail pieces in the center to the horizontal support rail using
the bolts (2) provided. Assemble the right side rails by joining the (A) & (B) side rail pieces in the center to the
horizontal support rail using the bolts (2).Tighten with Allen key (6).
NOTE: Make sure the pre-assembled woot slat support pieces are toward the top of the side rails so the slats can
rest evenly.
STEP 1
STEP 2
STEP 3

- 4 -
Kendall Fabric Bed (Full-Queen)
Attach the Headboard to the assemble side rails using the bolts (1) and washers (4) and (5) on the both sides.
Repeat for the Footboard. Tighten with Allen key (6).
Attach U-bracket (K) to the Horizontal support frame (H) using the bolts (6) Tighten with Allen key (6)
Attach the Horizontal support frame (on step 4) using the bolts (2) Tighten with Allen key (6)
STEP
4
STEP 5
STEP 6

- 5 -
Kendall Fabric Bed (Full-Queen)
Attach Center Support Rail (L) to Headboard & footboard (on step 6) using the bolts (2) & bolts (3) Tighten with Allen key (6)
Place the straight slats on top, and enjoy your new bed frame!
STEP 7
STEP 8