Eaton JOCKEY Touch Specification sheet

PANEL SETUP
Press the Panel Setup button.
This will will advance the screen to the PANEL SETUP screen 1/2.
Jockey Pump Controllers
Technical Data MN081024EN
Quick Setup Programming Guide
Eective June 2015
QUICK SETUP
The Quick Setup menu allows programming of the Time, Date, Start Pressure, Stop Pressure and
Minimum Run Timer.
NOTE: Before applying power to the controller, ensure the Motor Circuit Protector or Motor Overload Trip Setting are set to match
the motor nameplate full load amps.
START
Press the MENU button on the top right of the Main Display Screen.
This will advance the screen to the MENU 1/3 screen.
QUICK SETUP
Press the Quick Setup button.
This will advance the screen to the Quick Setup screen for setting the Time of Day.
SET TIME
The time of day is set in 24 Hour format.
Using the number buttons, enter the current time of day.
Pressing the Arrow button will delete values one character at a time.
Once the time of day is programmed, press the Next button.
This will advance the screen to the Quick Setup screen for setting the date.
Quick Setup programming instructions are continued
on the back of this page.
*NOTE: If programming is interrupted for longer than one
minute, or the Cancel button is pressed during programming,
all values entered in the Quick Setup program will return to the
previously entered values. If the controller has no values entered
(first time setup), the values will return to the factory default
settings.
(For details, download the JOCKEY Touch™ Operation Manual
from our website: www.chfire.com)

Eaton Industries Canada Company
10725 25th Street NE, #124
Calgary, AB
Canada T3N0A4
www.chfire.com
Technical Data MN081024EN
Quick Setup Programming Guide
Eective June 2015
© 2015 Eaton
All Rights Reserved
Printed in Canada
Publication No. MN081024EN
June 2015
Jockey Pump Controllers
START PRESSURE
The pressure is set in PSI format.
(To set in BAR format, refer to the JOCKEY Touch™ Operation Manual.)
Using the number buttons, enter the start pressure.
Pressing the Arrow button will delete the pressure values one character at a time.
Once the pressure is programmed, press the Next button.
Pressing the Cancel button will return the display to the Panel Setup 1/2 screen.
All Quick Setup values must be re-entered.
STOP PRESSURE
The pressure is set in PSI format.
(To set in BAR format, refer to the JOCKEY Touch™ Operation Manual.)
Using the number buttons, enter the stop pressure.
Pressing the Arrow button will delete the pressure values one character at a time.
Once the pressure is programmed, press the Next button.
Pressing the Cancel button will return the display to the Panel Setup 1/2 screen.
All Quick Setup values must be re-entered.
MINIMUM RUN TIMER
The minimum run time can be set up to 999 seconds.
The timer can be disabled by pressing the button.
To re-enable the timer, press the Arrow button.
(The timer values are erased and must be re-entered).
Using the number buttons, enter the minimum run time.
Pressing the Arrow button will delete the timer values one character at a time.
Once the minimum run time is programmed, press the Next button.
Pressing the Cancel button will return the display to the Panel Setup 1/2 screen.
All Quick Setup values must be re-entered.
SETUP COMPLETE
Once all the functions have been set, press the OK button.
The display will return to the Main Display Screen.
Pressing the Cancel button will return the display to the Panel Setup 1/2 screen.
All Quick Setup values must be re-entered.
SET DATE
The date is set in MM/DD/YY format.
Using the number buttons, enter the current date.
Pressing the Arrow button will delete values one character at a time.
Once the date is programmed, press the Next button.
This will advance the screen to the Quick Setup screen for setting the Start Pressure.
Pressing the Cancel button will return the display to the Panel Setup 1/2 screen.
All Quick Setup values must be re-entered.