Eaton 5E Assembly instructions

DSD-5E2206 English
Eaton 5E
Advanced User Guide
5E700UI-EA
5E900UI-EA
5E1200UI-EA
5E1600UI-EA
5E2200UI-EA
Copyright © 2023 EATON
All rights reserved.

Contents
1 Special symbols ............................................................................................... 1
2 Introducon .................................................................................................... 2
2.1Environmentalprotecon ......................................................................... 2
2.2Benets ..................................................................................................... 3
3 Presentaon .................................................................................................... 4
3.1Standardinstallaon ................................................................................. 4
3.2 Front panel ........................................................................................... 5
3.3 Rear panel ................................................................................................. 5
4 Installaon....................................................................................................... 6
4.1Inspecngtheequipment ......................................................................... 6
4.2Recommendedposions........................................................................... 7
4.3UPSconnecon ......................................................................................... 7
4.4 USB COM port ........................................................................................... 9
5 Operaon ...................................................................................................... 10
5.1Start-upandnormaloperaon ............................................................... 10
5.2StarngtheUPSonbaery..................................................................... 11
5.3 UPS shutdown......................................................................................... 11
5.4Operangmodes..................................................................................... 12
5.5 Return of AC input power ....................................................................... 12
6 UPS maintenance .......................................................................................... 13
6.1Equipmentcare ....................................................................................... 13
6.2Storingtheequipment ............................................................................ 13
6.3Recyclingtheusedequipment ................................................................ 13
7 Troubleshoong ............................................................................................ 15
7.1 Service and support ................................................................................ 16
8 Specicaonandtechnicalcharacteriscs.................................................... 17
8.1 Electrical input ........................................................................................ 17
8.2 Electrical output...................................................................................... 17
8.3Baery..................................................................................................... 18
8.4 Environmental and safety........................................................................ 18
9 Glossary......................................................................................................... 20

1
1 Specialsymbols
The following are examples of symbols used on the UPS or accessories to alert you
toimportantinformaon:
DANGER: Dangerous voltage levels are present within the UPS. The UPS
has its own internal power source (the baery). Consequently, the pow-
er outlets may be energized even if the UPS is disconnected from the AC
power source.
Important instrucons that must always be followed.
CAUTION: Baeries present a risk of energy or electrical shock or burn
from high short circuit current. Observe proper precauon. Baeries
may contain HIGH VOLTAGE and CORROSIVE, TOXIC and EXPLOSIVE
substances.
Informaon, advice, help.
Read the documentaon provided.
Disconnect input plug.
Before maintenance, rst shut down the UPS then disconnect the AC
power source, internal and external baeries then discharge capacitors
by pressing the ON buon and wait 5 minutes.
This equipment should only be used in a dry indoor environment.
0 ℃Operang range of temperature.
85%
0%
Operang range of humidity.
The UPS and their baeries must be kept in a venlated place.

2
2 Introduction
ThankyouforselecnganEaton5Eproducttoprotectyourelectricalequipment.
The Eaton 5E range has been designed with the utmost care. We recommend that
youtakethemetoreadthisadvanced user guide to take full advantage of the
manyfeaturesofyourUPS(UninterrupblePowerSystem).
Before installing your Eaton 5E, please read the informaon and safety instruc-
onsprovided.Followtheinstruconsin thequickstartguideandifnecessary,
refer to this advance user guide.
TodiscovertheenrerangeofEatonproducts,weinviteyoutovisitourwebsite
at eaton.com or contactyourEatonlocalrepresentave.
2.1 Environmentalprotecon
Eatonhasimplementedanenvironmental-proteconpolicy.Productsaredevel-
oped according to an eco-design approach.
2.1.1 Substances
This product does not contain CFC and HCFC. This product does not contain as-
bestos.Thisproductiscompliantwithregulaonsontherestriconoftheuse
ofsubstancesinelectricalandelectronicequipment.
2.1.2 Packaging
To improve waste treatment and facilitate recycling, separate the various packing
components.
• The cardboard we use comprises over 50% of recycled cardboard.
• Plascbagsaremadeofpolyethylene.
• Packingmaterialsarerecyclableandbeartheappropriateidencaonsymbol
01
.
Materials Abbreviaons Number in the symbols
01
Polyethylene terephthalate PET 01
High-density polyethylene HDPE 02
Polyvinyl chloride PVC 03
Low-density polyethylene LDPE 04
Polypropylene PP 05
Polystyrene PS 06

3
Followalllocalregulaonsforthedisposalofpackingmaterials.
2.1.3 End of life
Eaton will process products at the end of their service life in compliance with
localregulaons.Eatonworkswith
companiesinchargeofcollecngandeliminangourproductsattheendoftheir
service life.
2.1.4 Product
Theproductismadeupofrecyclablematerials.Dismantlinganddestrucon
musttakeplaceincompliancewithalllocalregulaonsconcerningwaste.At
the end of its service life, the product must be transported to a processing cen-
ter for electrical and electronic waste. eaton.com/recycling
2.1.5 Baery
Theproductcontainslead-acidbaeriesthatmustbeprocessedaccordingto
applicablelocalregulaonsconcerningbaeries.Thebaerymayberemoved
tocomplywithregulaonsandinviewofcorrectdisposal.
2.2 Benets
TheEaton5Euninterrupblepowersystem(UPS)protectsyoursensiveelectron-
icequipmentfromthemostcommonpowerproblems,includingpoweroutages,
voltage sags, impulsive transients, line noise, and long-term under and over volt-
agecondions.
Poweroutagescanoccurwhenyouleastexpectitandpowerqualitycanbeerrat-
ic. These power problems have the potenaltocorruptcricaldata,destroyun-
saved work sessions, and damage hardware -causinghoursoflostproducvity
and expensive repairs.
WiththeEaton5E,youcansafelyeliminatetheeectsofpowerdisturbancesand
guard the integrity of your equipment. Providing outstanding performance and
reliability,the Eaton 5E’suniquebenets include:
• Standard communicaon:one USB communicaonport.
• Backed by worldwide agency approvals.

4
3 Presentation
3.1 Standardinstallaon
3.1.1 Weights and dimensions
D
D
H
H
W
W
Descripon (UPS) Weights (kg / lbs) Dimenons (mm / inch) D x W x H
5E700UI-EA 4.2 / 9.3 288 x 100 x 148 / 11.5 x 3.9 x 5.8
5E900UI-EA 5.2 / 11.4 288 x 100 x 148 / 11.5 x 3.9 x 5.8
5E1200UI-EA 8.2 / 18.2 330 x 133 x 180 / 13.0 x 5.2 x 7.1
5E1600UI-EA 8.9 / 19.6 330 x 133 x 180 / 13.0 x 5.2 x 7.1
5E2200UI-EA 10.0 / 22.0 330x 133 x 180 /13.0 x 5.2 x 7.1

5
3.2 Front panel
1 2 3
3.3 Rear panel
5E700UI-EA / 5E900UI-EA
1
3
1
3
1
32
22
4
5E1200UI-EA 5E1600UI-EA / 5E2200UI-EA
1AC Input 3Breaker
2AC Output 4Fan
1. USBcommunicaonport
2. ON/OFFBuon
3. UPS status LED

6
4 Installation
4.1 Inspecngtheequipment
Ifanyequipmenthasbeendamagedduringshipment,keeptheshippingcartons
andpackingmaterialsforthecarrierorplaceofpurchaseandleaclaimforship-
pingdamage.Ifyoudiscoverdamageaeracceptance,leaclaimforconcealed
damage.
Toleaclaimforshippingdamageorconcealeddamage:
1. Filewiththecarrierwithin15daysofreceiptoftheequipment;
2. Sendacopyofthedamageclaimwithin15daystoyourservicerepresentave.
Checkthebaeryrechargedateontheshippingcartonlabel.Ifthedatehas
passedandthebaerieswereneverrecharged,donotusetheUPS.Contact
yourservicerepresentave.
4.1.1 Package content
1
700
900
1200
1600
2200
Quick Start
5E
IEC model only
23 4
Verify that the following addi-
onal items are included with
theUPS:
1. UPS
2. Conneconcables
3. Instrucons and Safety Infor-
maon
4. Quick start

7
4.2 Recommendedposions
PlacetheEaton5Eonaat,stablesurfaceinitsnallocaon.Alwayskeep6”or
150mmoffreespacenearUPSopeningsforvenlaon.
!
Installaonintowerposion
4.3 UPSconnecon
4.3.1 Power supply connecon
CheckthattheindicaonsonthenameplatelocatedonthebackoftheUPS
correspondtotheAC-powersourceandthetrueelectricalconsumponof
the total load.
ConnecttheUPStotheAC-powersourcewithcablethroughawalloutletequipped
withanearthconnector,usingyourequipmentcord.
1. Disconnecttheprotectedequipment,keepthepowercable
2. ConnectIECcableonprotectedequipmentside.
3. Connect IEC cable provided on UPS AC output side
4. Connect the power cable to UPS AC inlet
5. Connect the power cable to wall outlet

8
15
2
3
4
IEC
4.3.2 Protected outlets / Backup & Protected outlets
Plugcricalequipment(computer,monitor,modem,etc.)tothe backup&pro-
tectedoutletsprovidingbaerybackuppower,takingcarenottoexceedtherated
current indicated in amperes.
EquipmentconnectedtotheseoutletsissuppliedassoonastheACcordisplugged
in.ThesearenotaectedbyON/OFFbuon.

9
4.4 USB COM port
Connect the UPS to the computer using the USB cable.
Enhanceyourpurchasebydownloadingthemonitoringsoware“EatonUPSCom-
panion”usingURL:eaton.com/downloads

10
5 Operation
5.1 Start-upandnormaloperaon
CheckthattheindicaonsonthenameplatelocatedonthebackoftheUPS
meetstotheACpowersourceandthetrueelectricalconsumponofthe
total load.
5.1.1 Baery charge
TheUPSchargesthebaeryassoonasitisconnectedtotheACoutlet,whether
theON/OFFbuonispressedornot.ItisrecommendedthattheUPSbeperma-
nently connected to the AC power supply to ensure the best possible autonomy.
Buon funcon:
1. Buzzermute:
Pushthebuonfor<2stomutethebuzzertemporarilywhenthereisafaultoccur
orbaerytestfail.
2. UPSon/o:
Pushthebuonfor>2s,thentopoweron/otheUPS.
3. Silencemode:
LetUPSworkinginthestandbymode,thentopushthebuonfor>11stoenter
theconguraonmode.
To start the UPS:
1. Verify that the UPS power cord is plugged in.
2. Thereisasinglebuzzerindicaon.
3. Press the buonontheUPSfrontpanelforfewseconds.
ChecktheUPSfrontpaneldisplayforacvealarmsornoces.Resolveanyacve
alarms before connuing; if the indicator illuminates in red, do not proceed
unl all alarms are clear (see “Troubleshoong” secon). Check the UPS status
fromthefrontpaneltoviewtheacvealarms.Correctthealarmsandrestartif
necessary.

11
4. Verify that the indicatorilluminatesingreen,indicangthattheUPSisop-
erangnormallyandanyloadsarepoweredandprotected.TheUPSshouldbe
in Normal mode.
5. TheUPSwillmakearst baerytest, the will blink for few seconds, this
behavior is normal
> 2 s
ON
5.2 StarngtheUPSonbaery
To start the UPS on baery:
1. When the UPS is disconnected from the AC power source, press the buon
ontheUPSfrontpanel.TheUPStransfersfromStandbymodetoBaerymode.
The indicator blinking and the buzzer snooze.
TheUPSsuppliespowertoyourequipment.
2. ChecktheUPSfrontpaneldisplayforacvealarmsornocesbesidesthe“Bat-
tery mode” and related nocaons that indicates missing ulity power. Re-
solveanyacvealarmsbeforeconnuing.See“Troubleshoong”.
ChecktheUPSstatusfromthefrontpaneltoviewtheacvealarms.Correctthe
alarms and restart if necessary.
5.3 UPS shutdown
ToshutdowntheUPS:
Press the buononthefrontpanelfortwoseconds.UPSstartstobeepand
indicator is blinking. The UPS then transfers to Standby mode, and the indicator
turnso.

12
5.4 Operangmodes
The Eaton 5E front panel indicates the UPS status through the UPS LED indicator.
5.4.1 Normal mode
When the symbol is illuminated in green, the UPS is providing protected AC
poweroutput. TheUPSchargesthe baeriesand providespowerproteconto
yourequipment.
5.4.2 Baery mode
WhentheUPSisoperangduringapoweroutage,thealarmbeepsonceevery
vesecondsandtheindicatorilluminatesblinking.
Thenecessaryenergyisprovidedbythebaery.
Whentheulitypowerreturns,theUPStransferstoNormalmodeoperaonwhile
thebaeryrecharges.IfbaerycapacitybecomeslowwhileinBaerymode,the
audible alarm beeps faster.
Thiswarningisapproximate,and theactualmetoshutdownmayvarysigni-
cantly;gracefullyshutdownallapplicaonsonconnectedequipmentduetoimmi-
nent UPS shutdown.
WhenulitypowerisrestoredaertheUPSshutsdown,theUPSautomacally
restarts.
5.4.3 Low-baery warning
• The indicatorblinkingquickly.
• The audio alarm beeps every 1.5 seconds.
Theremainingbaerypowerislow.Shutdownallapplicaonsontheconnected
equipmentbecauseautomacUPS
shutdown is imminent.
5.4.4 End of baery backup me
• All the LEDs go OFF.
• The audible alarm stops.
5.5 Return of AC input power
Followinganoutage,theUPSrestartsautomacallywhenACinputpowerreturns
(unlesstheUPSisnotshut-downbybackupend)andtheloadissuppliedagain.

13
6 UPSmaintenance
6.1 Equipmentcare
Forthebestprevenvemaintenance,keeptheareaaroundtheequipmentclean
and dust free. If the atmosphere is very dusty, clean the outside of the system with
a vacuum cleaner.
Forfullbaerylife,keeptheequipmentatanambienttemperatureof25°C(77°F).
Thebaeriesareratedfora3-5yearservicelife.Thelengthofservicelifevaries,
dependingonthefrequencyofusageandambienttemperature(lifedividedby2
each10°Cabove25°C).
IftheUPSrequiresanytypeoftransportaon,verifythattheUPSisturnedo.
Baeriesusedbeyondexpectedservicelifewilloenhaveseverelyreducedrun-
mes.Replacebaeriesatleastevery4yearstokeepunitsrunningatpeakper-
formance.
Baeriesrunmewillbereducedatlowtemperature(below10°C).
6.2 Storingtheequipment
Ifyoustoretheequipmentforalongperiod,rechargethebaeryevery6months
byconnecngtheUPStoulitypower.Theinternalbaerieschargeto90%capac-
ityinlessthan3hours.However,Eatonrecommendsthatthebaerieschargefor
48hoursaerlong-termstorage.
Check the baery recharge date on the shipping carton label. If the date has
passedandthebaerieswerenever
recharged,donotusethem.Contactyourservicerepresentave.
6.3 Recyclingtheusedequipment
Contactyourlocalrecyclingorhazardouswastecenterforinformaononproper
disposaloftheusedequipment.eaton.com/recycling
Donotdisposethebaeryorbaeriesinare.Baeriesmayexplode.
Properdisposalofbaeriesisrequired.Refertoyourlocalcodesfor
disposalrequirements.
Donotopenormulatethebaeryorbaeries.Releasedelectrolyteis
harmful to the skin and eyes. It may be toxic. Do not discard the UPS or

14
theUPSbaeriesinthetrash.Thisproductcontainssealed,leadacid
baeriesandmustbedisposedofproperly.Formoreinformaon,con
tact your local recycling/reuse or hazardous waste center.
Donotdiscardwasteelectricalorelectronicequipment(WEEE)inthe
trash. For proper disposal, contact your local recycling/reuse or hazard
ous waste center.

15
7 Troubleshooting
TheEaton5Eisdesignedforreliable,autonomousoperaonwhileprovidingyou
withnocaonsandalertswhenevera
potenaloperaonalorperformanceissueoccurs.
Usually the alarms shown by the control panel do not mean that the output power
isaected.Instead,theyareprevenvealarmsintendedtoalerttheuser.
• EventsaresilentstatusinformaonthatarerecordedintotheEventlog.Exam-
ple=“ACfreqinrange”.
• Alarms are recorded into the Event log and displayed on the LCD status screen
with the logo blinking. Some alarms may be announced by a beep every 3 sec-
onds.Example=“Baerylow”.
• FaultsareannouncedbyaconnuousbeepandredLED,recordedintotheFault
loganddisplayedontheLCDwithaspecicmessagebox.Example=Out.short
circuit.
UsethefollowingtroubleshoongcharttodeterminetheUPSalarmcondion.
Condions Possible cause Acon
The UPS outlets are
not supplied with
power or the UPS
cannot be turn on
aer pressing the
buon
The ON/OFF Buon is not
pressed or the ON/OFF but-
ton is pressed too briey.
Press the buon connuously for
more than 2 seconds and check
that LED turns to green.
The connected devic-
es are not supplied
when AC power fails.
The devices are not connect-
ed good to the UPS outlets .
Check the cables and reconnect
the devices to the UPS outlets.
Green LED ashes
every 1 second and
audio alarm beeps
every 5 seconds.
The UPS frequently operates
on baery power because
the AC power source is of
poor quality.
Have the electrical installaon
checked by a professional or use
another wall outlet.
Green LED ashes
every 1 second and
audio alarm beeps
every 1.5 second.
UPS operates on baery
power with a low baery
The actual me to shutdown may
vary signicantly, prepare your
equipment for shutdown.
Baery discharging
me diminishes
Baery not yet been fully
charged or overloaded
Keep UPS connected to ulity
power persistently for more than
6 hours to recharge the baeries.
Or remove some noncrical loads.

16
Green/Red LED alter-
nave ashes every
0.5 second and audio
alarm beeps every 1.5
second.
The connected loads are
exceed the UPS capacity or
Baery fault
The connected loads are exceed
the UPS capacity, remove some
noncrical loads or check if some
loads are failed.
Red LED is on and the
audio alarm beeps
connuous.
A fan fault has occurred on
the UPS. The UPS outlets are
no longer supplied.
Check if the fan is stopped, if
no, please contact your service
representave.
Red LED is on and the
audio alarm beeps
connuous.
An internal fault has occurred
on the UPS. The UPS outlets
are no longer supplied.
Contact your service represen-
tave.
USB communicaon
fails.
Cable connecon may be
defecve.
Re-connect the USB cable, if sll
not available. Contact your service
representave.
7.1 Service and support
Ifyouhaveany quesonorproblemwiththeUPS,call Eaton oryourlocal ser-
vicerepresentaveinyourcountry/region.Pleasehavethefollowinginformaon
readywhenyoucallforservice:
• Model number
• Serial number
• Firmware version number
• Date of failure or problem
• Symptoms of failure or problem
• Customerreturnaddressandcontactinformaon
Ifrepairisrequired,youwillbegivenaReturnedMaterialAuthorizaon(RMA)
number. This number must appear on the outside of the package and on the Bill
OfLading(ifapplicable).Usetheoriginalpackagingorrequestpackagingfromthe
Help Desk or distributor. Units damaged in shipment as a result of improper pack-
aging are not covered under warranty. A replacement or repair unit will be shipped
freightprepaidforallwarranedunits.
Forcricalapplicaons,immediatereplacementmaybeavailable.Callthe
Help Desk for the dealer or distributor nearest you.