EAW CAZ1400 User manual

Part No. SW0177 Rev. C 05/07
DESCRIPTION
The CAZ1400 is designed for continuous duty in speech, music,
paging, and sound reinforcement applications demanding high
performance, exible features, and rugged dependability.
The CAZ1400 is rated at a continuous output of 310 watts per
channel into 8 ohms, 450 watts per channel into 4 ohms, and 800
watts per channel into 2 ohms. In bridge mode, the CAZ1400 is
rated at 900 watts into 8 ohms and 1400 watts into 4 ohms.
A switchable low-cut lter eliminates low-frequency energy below
30 Hz for tighter bass response, and a switchable limiter protects
loudspeakers from spurious transients and hard clipping.
Inputs are balanced/unbalanced 1/4" TRS and XLR line input jacks
for each channel, as well as screw terminal connections for the two
discrete, actively balanced inputs.
Speaker connections are made with screw-terminals for Channel A,
Channel B, and Bridged Mono. Front panel detented gain controls
provide independent level-setting for each channel. Signal present
and overload LEDs, located above each gain control, provide visual
feedback for monitoring the output signal level.
The CAZ1400 has two variable speed fans, one in the front and one
in the back, to keep it cool no matter how hard it is driven. As the
power output increases, the fan speed increases to move more cool
air through the chassis and away from the internal heatsink and
power transistors, increasing the life span of the amplier.
Five year warranty.
CAZ1400
STEREO POWER AMPLIFIER
• 1400 watts continuous at 4 ohms bridged
• Ultra low-noise/low-distortion design
• Switchable low-cut lter @ 30 Hz on both channels
• Switchable limiter on both channels
• Balanced/unbalanced 1/4" TRS and XLR line input jacks
• Screw terminal input connectors (balanced)
• Screw terminal output connectors
(Ch. A, B, and Bridged Mono)
• Detented rotary gain controls calibrated in dB
• Signal present and OL (overload) LEDs
• Variable speed fans and large-nned heatsinks
for superior cooling
• Robust chassis, proven design
• Discrete component power ampliers
• Double-sided, quality circuit boards
• Power LED indicator
Features
• Paging Systems • Houses of Worship
• Hotel and Ballrooms • Meeting Rooms
• Schools • Oces
• Foreground/Background
Music Systems
Applications
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404
TEL outside US 425.892.6503 | FAX [phone] | Page 1 of 4
BREAKER
CLIPLIMIT
ON
OFF
STEREO
SUBSONIC
FILTER AT30Hz
ON
OFF
PUSH
PUSH
AMPMODE
MONO
BRIDGE
CAUTION
TOREDUCETHERISKOFFIREORELECTRICSHOCK,
DONOTEXPOSETHISAPPARATUSTO RAINOR
MOISTURE.SEEINSTRUCTIONSBEFOREUSING.
INPUT
B
LINE
(BALANCED)
B (+)
B (+) B (-)
CHANNELB BRIDGED CHANNEL A
(+) (-) A (+) A (-)
B (--)
GND
A (--)
A (+)
INPUT
A
LINE
(BALANCED)
SERIAL/DATECODE
INPUT
CONNECTION
MANUFACTURED IN CHINA
2004 LOUD TECHNOLOGIES INC.
"EAW" IS A REGISTERED TRADEMARK
OF LOUD TECHNOLOGIES INC.
CAZ1400-AMPLIFIER
SIGOLSIGOL
30
-30 -
ON
OFF
POWER
A B
dB dB
OO
OO
CAZ1400-AMPLIFIER
19.0 in/483 mm
17.0 in/432 mm
14.5 in/368 mm
3.5 in/
89 mm
2U
15.7 in/400 mm
SIGOLSIGOL
30
-30 -
ON
OFF
POWER
A B
dB dB
OO
OO
CAZ1400-AMPLIFIER
CAZ1400 DIMENSIONS

Part No. SW0177 Rev. C 05/07
CAZ1400
STEREO POWER AMPLIFIER
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404
TEL outside US 425.892.6503 | FAX [phone] | Page 2 of 4
PERFORMANCE
Inputs (balanced)
Sensitivity 1.15 V (+3.4 dBu)
Impedance 20k ohm
Maximum Input Level9.75 V rms (+22 dBu)
Output
(Continuous sine wave average output power per channel with both channels driven)
310 watts per channel into 8 ohms, 20 Hz to 20 kHz
450 watts per channel into 4 ohms, 20 Hz to 20 kHz
800 watts per channel into 2 ohms, 20 Hz to 20 kHz
(Bridged Mono operation)
900 watts into 8 ohms, 20 Hz to 20 kHz
1400 watts into 4 ohms, 20 Hz to 20 kHz
Note: Power ratings are specified at 120 VAC line voltage.
Power Bandwidth
Main In to Amp Out 5 Hz to 50 kHz (+0, –3 dB)
Frequency Response
Main In to Amp Out 25 Hz to 25 kHz (+0, –1 dB)
Noise
Main In to Amp Out >100 dB (below rated power into 4 ohms)
Distortion (THD, SMPTE IMD)
<0.03% @ 8 ohms
Channel Separation
>90 dB @ 1 kHz
Damping Factor
>300 @ 1 kHz and below
Voltage Gain
32 dB (39.8 V/V)
Turn On Delay
2.5 seconds
Subsonic Filter
–9 dB @ 30 Hz, switchable
Protection Circuitry
DC offset
Over-temperature
Short circuit
Current limit
Topology
Class AB
Cooling
Dual variable-speed fans with back to front airflow
Indicators
Channels A and B
SIG (Signal Present), OL (Overload)
POWER
Current Consumption
Idle 0.5 A
Musical Program @ 8Ω5.1 A
Musical Program @ 4Ω6.7 A
Musical Program @ 2Ω10.6 A
AC Power Requirements
U.S. 120 VAC, 60 Hz
Europe 240 VAC, 50 Hz
Korea 220 VAC, 60 Hz
Physical
Height 3.5 in/89 mm
Width 19.0 in/483 mm
Depth 15.7 in/400 mm
Weight 48.5 lb/22.0 kg

Part No. SW0177 Rev. C 05/07
CAZ1400
STEREO POWER AMPLIFIER
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404
TEL outside US 425.892.6503 | FAX [phone] | Page 3 of 4
INPUT A
TRS
SCREW
TERMINALS
SCREW
TERMINALS
INPUT A
XLR
INPUT B
TRS
INPUT B
XLR
AMP
MODE
SWITCH
STEREO
MONO
A(+)
A(-)
GND
B(+)
B(-)
BRIDGE
STEREO
MONO
BRIDGE
STEREO
MONO
BRIDGE
1
2 3
1
2 3
CHANNEL A
LEVEL
CHANNEL B
LEVEL
SUBSONIC
FILTER
ON
OFF
ON
OFF
ON
OFF
ON
PROTECTION
DC OFFSET
OVER TEMP
SHORT CIRCUIT
CURRENT LIMIT
OFF
CLIP
LIMITER
OL
POWER
AMPLIFIER
–VDC
+VDC
CHANNEL
A
SPEAKER
OUT
BRIDGED
SPEAKER
OUT
POWER
AMPLIFIER
–VDC
+VDC
CHANNEL B
SPEAKER
OUT
OL
SIG SIG
+
–
+
–
+
–
+
–
VDC (CHANNEL A)
TOROIDAL POWER
TRANSFORMER
BREAKER
FUSE
FUSE
TEMP
SENSOR
(ON HEATSINK) FAN
SPEED
CONTROL
HI DCV
HI DCV
LO DCV
LO DCV
POWER
SWITCH
POWER
+
–
VDC (CHANNEL B)
+
–
FAN FAN
CAZ1400 BLOCK DIAGRAM

Part No. SW0177 Rev. C 05/07
CAZ1400
STEREO POWER AMPLIFIER
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404
TEL outside US 425.892.6503 | FAX [phone] | Page 4 of 4
CSI PRODUCT SPECIFICATIONS FOR DESIGNERS, SPECIFIERS, AND CONSULTANTS
(Also known as “A&E Specifications”)
The following are “Part 2 Products” CSI-type specifications. It is assumed that “Part 1 General – Administrative and Procedures”
and “Part 3 Execution – Installation and Maintenance” are part of an overall audio system or project specification.
PART 2 PRODUCTS
2.01 Approved Manufacturer/Product
A. EAW Commercial, One Main Street, Whitinsville, MA 01588
B. Model number: CAZ1400
2.02 Design
A. Configuration: 2-channel power amplifier
1. Inputs:
a. Two balanced mono line inputs (two XLR/1/4" TRS combo line-level input jacks)
b. One screw terminal input strip (Channel A balanced, Channel B balanced)
2. Outputs:
a. One screw terminal output strip (Channel A, Channel B, Bridged Mono)
B. Powering Mode:
a. Internal AC power supply, 120 VAC, 60 Hz or 230 VAC, 50/60 Hz.
2.03 Electrical Properties
A. Frequency Response (+0, –1 dB):
25 Hz to 25 kHz
B. Total Harmonic Distortion (20 Hz to 20 kHz @ rated output into 8 ohms):
< 0.03%
C. Signal-to-Noise Ratio:
>100 dB below rated power into 4 ohms
D. Channel Separation (@ 1 kHz):
> 90 dB
E. Input Gain Control Range:
Off to +30 dB
F. Maximum Input Level:
9.75 V rms (+22 dBu)
G. Rated Output:
1. Continuous sine wave average output power per channel, both channels driven:
a. 310 watts rms into 8 ohms
b. 450 watts rms into 4 ohms
c. 800 watts rms into 2 ohms
2. Continuous sine wave average output power, bridged mono operation:
a. 900 watts rms into 8 ohms
b. 1400 watts rms into 4 ohms
2.04 Physical Properties
A. Dimensions
1. Height: 3.5 in/89 mm
2. Width: 19.0 in/483 mm
3. Depth: 15.7 in/400 mm
B. Weight
1. Net Weight: 48.5 lb/22.0 kg