EAW CAM60 User manual

Part No. SW0139 Rev. B 05/07
DESCRIPTION
The CAM60 is designed for continuous duty in speech, music,
paging, and sound reinforcement applications demanding high
performance, exible features, and rugged dependability. Each of
the four, actively balanced, mic/line inputs have combination XLR-
1/4 in input jacks and a sensitivity switch for line level, mic level, or
mic-level with 24 V DC phantom power. Aux stereo and telephone
paging inputs are also provided as well as a signal processing loop.
Input 1 has voice-activated priority over Inputs 2 to 4 and the Aux
Input. Inputs 1 to 4 have switch-activated priority over the Aux input.
The Telephone Paging input has voice-activated priority over all
inputs. The front panel includes Mic/Line input, Aux, and Master level
controls, as well as bass and treble. An LED meter indicates signal
strength and output overload. An internal 1 watt amplier with level
control allows monitoring the Aux input.
The CAM60 provides outputs for 4 ohm loads and for 25 V, 70 V, and
100 V distributed systems. The output stage has smart circuitry to
protect against permanent damage caused by overloading, shorts,
and extreme temperatures. The CAM60 operates on 115 V or 230 V
AC mains determined by a voltage select switch. A 24 V DC power
input allows connecting backup battery power with automatic AC to
DC switchover. Five year warranty.
CAM60
5 INPUT x 1 OUTPUT 60 W MIXER-AMPLIFIER
• Discrete component 60 W power amplier
• Signal processing loop
• Multiple priority override circuits
• 2 rack unit mounting kit included
Features
• Paging Systems • Houses of Worship
• Hotel and Ballrooms • Meeting Rooms
• Schools • Oces
• Foreground/Background Music Systems
Applications
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404
TEL outside US 425.892.6503 | FAX [phone] | Page 1 of 2
CAM60-MIXER AMPLIFIER
1 2 3 4
CAUTION:
ELECTRIC SHOCK HAZARD
DO NOT REMOVE COVER.
REFER SERVICING TO
QUALIFIED PERSONNEL.
SEE INSTRUCTION MANUAL.
INPUT 1INPUT 2INPUT 3INPUT 4
MONITOR
VOL
TEL
VOL
PRE
OUT
MAIN
IN
R
L
BALANCED
-
+TEL PAGING
8
TR
G
PRIORITY
1W
+ 100V70V25V
4
COM
DC 24V
-
OFF
DC SW
GND
115VAC/230VAC ~ 60Hz/50Hz
ON
PHANTOM
24V
LINE MIC PHANTOM
24V
LINE MIC PHANTOM
24V
LINE MIC PHANTOM
24V
LINE MIC
1: for CD
2: for Tuner
3: for Tape
4: for AUX IN
© 2004 LOUD TECHNOLOGIES INC.
"EAW" IS A REGISTERED TRADEMARK
OF LOUD TECHNOLOGIES INC.
CAM60-MIXER AMPLIFIER

Part No. SW0139 Rev. B 05/07
PERFORMANCE
Input 1-4 (balanced / unbalanced)
Sensitivity Impedance
Mic 0.5 mV / 1 mV 600 ohm
Line 50 mV / 200 mV 47k ohm
Aux In (unbalanced)
Aux 100 mV 20k ohm
Tuner 180 mV 30k ohm
Tape 320 mV 50k ohm
CD 570 mV 80k ohm
Tel/Paging (balanced / unbalanced)
Variable 600 ohm
Main In (unbalanced)
1 V 10k ohm
Output
Maximum Load Impedance
Preamp 1 V (nominal) 600 ohm
Monitor 1 W 8 ohm
Low Z 60 W 4 ohm
High Z 25 V / 70 V / 100 V 4 ohm / 33 ohm / 67
ohm
Operating Range (+/-3 dB)
Mic In to Amp Out 50 Hz to 15 kHz
Noise
>60 dB (below maximum output)
Distortion (THD, 60 W @1 kHz)
<0.5%
CAM60
5 INPUT x 1 OUTPUT 60 W MIXER-AMPLIFIER
PHYSICAL
Front Controls
Type Range
Input 1-4 Level 0 to 10
Aux Level 0 to 10
Equalization Lo +/-10 dB @ 100 Hz
Hi +/-10 dB @ 10 kHz
Volume Level 0 to 10
Power AC mains On / Off
Rear Controls
Input 1-4 Select Line/Mic/Phantom 24V
Power Switch 24 V DC On / Off
Aux Select CD/Tuner/Tape/Aux
Tel & Mon Vol Level
Mains Power
Rating Fuse
AC (50/60 Hz) 115 V / 230 V (+/-5%) 2.5 A fuse
DC 24 V 15 A fuse
Power Input 345 W
Environmental
Maximum Ambient 131° F / 55° C
Humidity Non-precipitating
Dimensions (inches / mm)
H x W x D 3.9 x 17.1 x 13.2 100 x 435 x 335
Weight (approximate net lb / kg)
25.6 11.6
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404
TEL outside US 425.892.6503 | FAX [phone] | Page 2 of 2