EAW AS460e User manual

SPECIFICATIONS AS460e
DESCRIPTION
APPLICATION
PERFORMANCE
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX [phone] [e-mail] www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. AS460e/2 pp October 2001 Printed in USA
A 2-way mid/high system in a trapezoidal enclosure. Includes
a horn-loaded 10-in MF cone with Radial Phase Plug™ and a
1.4-in exit/2.5-in voice coil HF neodymium compression driv-
er on a 60° x 45° constant directivity horn. Powering mode
is selectable: bi-amplified or passive MF/HF crossover.
The AS460e is engineered for use in permanent installations.
It provides the mid/high performance capabilities of the
60°(h) ASe Series systems in a separate mid/high module. It
can be used as a stand-alone system for speech-only applica-
tions or, together with an AS415e, AS422e or AS625e LF mod-
ule, provide full range performance in a flexible, modular,
multi-enclosure format. Includes comprehensive 3/8"-16
mounting/suspension points. Six year warranty.
Applications include:
Stadiums Arenas
Performing Arts Centers Houses of Worship
Frequency Response (Hz)
±3 dB 200 Hz to 15 kHz
-10 dB 180 Hz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
Passive MF/HF 107
MF 109
HF 109
Impedance (Ohms)
Passive MF/HF 8
MF 8
HF 8
Power Handling (Watts, Continuous)
Passive MF/HF 450
MF 400
HF 125
Recommended High-Pass Frequency
24 dB/Octave 200 Hz (speech) 300 Hz (with LF)
Calculated Maximum Output (dB SPL @ 1m)
Passive MF/HF Peak 139
MF Peak 141
HF Peak 136
Passive MF/HF Long term 133
MF Long Term 135
HF Long Term 130
Nominal Coverage Angle/-6 dB points (degrees)
Horizontal 60
Vertical 45
Product Group I
System Configuration 2-way, mid/high
Powering Configuration(s) Bi-amplified or passive MF/HF
crossover
MF Subsystem & Loading 1x 10-in cone, Radial Phase
Plug™ horn-loaded
HF Subsystem & Loading 1x 1.4-in exit/2.5-in voice coil
neodymium compression driver
on constant directivity horn
Cabinet Type (shape) Trapezoidal
Enclosure Materials Exterior grade Baltic birch
plywood
Finish Wear-resistant textured black
paint
Connectors 2x 6-Contact terminal barrier
strip, jumpers used for powering
configuration
Suspension Hardware (18) 3/8"-16 threaded mounting/
suspension points (4 each
top, bottom and sides, 2 on back)
Grille Powder coated perforated steel
Dimensions inches millimeters
Height 22.5 572
Width (Front) 24.6 626
Width (Rear) 12.3 312
Depth 23.0 584
Trapezoid Angle 15 degrees per side
Weights pounds kilograms
Net Weight 95 43.2
Shipping Weight 110 50.1
PHYSICAL

SPECIFICATIONS AS460e
DIMENSIONAL DRAWING A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX [phone] [e-mail] www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. AS460e/2 pp October 2001 Printed in USA
INDICATES MOUNTING POINT,
3/8-1 THREADED HOLE (PI ANGLE)
INDICATES MOUNTING POINT,
3/8-1 THREADED HOLE (NUT PLATE).
INDICATES CENTER OF BALANCE.
FRONT
22.50
GRILLE PARTIALLY SHOWN
24.62
BACK
6.94
ACCESS PANEL
INPUT
5.00
C
L
C
L
19.50
4.00
10.50
1.50)
TOP/BOTTOM
4.00
C
L
A
A
16.0023.00
12.00
30°
10.09
12.29)
18.67
SIDES
DIMENSIONS APPLY
TO BOTH SIDES
C
L
18.60
4.6316.56
30°
509129 (0)
5/10/01
The bi-amplified or passive mid/high loudspeaker system
shall incorporate a horn-loaded 10-in MF cone with Radial
Phase Plug™ and a 1.4-in exit/2.5-in voice coil HF neodymi-
um compression driver.
The MF driver shall be loaded into a midrange horn construct-
ed of 1/8-in birch plywood backed with high density
polyurethane foam. The HF driver shall be loaded on a con-
stant directivity horn with a nominal coverage pattern of 60°
(h) x 45° (v). An internal passive filter network shall provide
fourth order acoustical crossover and system equalization.
System frequency response shall vary no more than ±3 dB
from 200 Hz to 15 kHz measured on axis. The mid/high sec-
tion shall produce a Sound Pressure Level (SPL) of 107 dB SPL
on axis at 1 meter with a power input of 1 Watt and shall be
capable of producing a peak output of 139 dB SPL on axis at
1 meter. The mid frequency section system shall produce a
Sound Pressure Level (SPL) of 109 dB SPL on axis at 1 meter
with a power input of 1 Watt and shall be capable of produc-
ing a peak output of 141 dB SPL on axis at 1 meter. The high
frequency section shall produce a Sound Pressure Level (SPL)
of 109 dB SPL on axis at 1 meter with a power input of 1 Watt
and shall be capable of producing a peak output of 136 dB
SPL on axis at 1 meter. The mid/high section shall handle
450 Watts of amplifier power (continuous) and shall have a
nominal impedance of 8 Ohms. The mid frequency section
shall handle 400 Watts of amplifier power. The high frequency
section shall handle 125 Watts of amplifier power (continuous)
and shall have a nominal impedance of 8 Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of multi-ply, void-free, cross-grain-lami-
nated, exterior grade, Baltic birch plywood and shall employ
extensive internal bracing. It shall be finished in wear-resist-
ant textured black paint . Input connectors shall be 2x 6-con-
tact terminal barrier strips. Eighteen (18) 3/8"-16 threaded
mounting/suspension points (4 each top, bottom and sides,
2 on back) shall be provided. The front of the loudspeaker
shall be covered with a powder coated perforated steel grille.
The mid/high loudspeaker shall be the EAW model AS460e.
Manufacturing tolerances are +/- 0.13 and +/- 1°