EAW JFX88 User manual

1 Main Street • Whitinsville, MA 01588 • Phone [phone] • FAX [phone]
0004703 (C)
Installation Instructions
JFX88 BRACKET
1. Inventory
Before beginning installation, inventory kit to items listed.
Item EAW P/N Qty Descri tion
1 0004702 1 Bracket/Wallmount/HDJF88WM
2 102017 2 Screw, 1/4-20 x 1 SHCS, Black
3 105061 2 Washer, Neo rene, 3/8 I.D. X 2 O.D.
4 105007 2 1/4 Washer, Flat, Black
5 105008 2 1/4 Washer, Lock, Black
Warning:
Installation should only be done by an experienced technician. Improper
installation may cause serious injury. The surface where the bracket/cabinet
is to be fastened must have enough structural integrity to support 00 pounds.
2. Mounting the Bracket
Due to various construction methods and materials used today, the hardware for securing the bracket to
the mounting surface is not su lied. It is recommended that you consult a building rofessional for the
ro er mounting hardware before mounting the bracket.
3. Removing the Shipping Hardware
Remove the flat head screws from the
to of the cabinet and the front of the
to hat flange on the bottom of the
cabinet using a 5/32 Allen wrench.
4. Choo ing which Slot to U e There are
two slots in each bracket arm. Use the
forward slot (as shown) when the
cabinet is facing er endicular to the
bracket mounting surface.
5. Hanging the Cabinet
A. Place a neo rene gasket on the
bracket’s lower arm. Center it on
the a ro riate slot.
B. Position the cabinet between the
bracket arms.
C. Align the bracket’s to slot to the
cabinet’s 1/4-20 threaded hole.
D. Holding the cabinet in osition,
insert the screw with its lock washer
and flat washer through the bracket
slot and into the cabinet’s to
threaded hole and hand tighten.
E. Re eat ste D through the bottom
bracket hole.
F. Position cabinet and tighten both
screws with a 3/16 Allen wrench.
(2) NEOPRENE WASHER EAW P/N 105061
3.00
(2) SCREW 1/4-20 X 1 LG
SHCS 18-8 BLK EAW P/N 102017
(2) LOCK WASHER 1/4 EAW P/N 105008
(2) FLAT WASHER 1/4
EAW P/N 105007
BRACKET/WALLMOUNT
/JFX88 EAW P/N 0004702
L
C
L
C
(4) Ø .323
THRU HOLE
6.00
16.00
17.75
2
3
4
3
13.25
9.80