EBN Technology POS70-2EB-370 User manual

1/47 Version1.2
U
Us se er r M Ma an nu ua al l
P
PO OS S 7 70 0 S Se er ri ie es s
*POS70-2EB-370
*POS70-2EB-478
*POS70-5EB-370
*POS70-5EB-478
Mar. 2007

2/47 Version1.2
Copyright Notice
The information in this document is subject to change without prior notice in
order to improve reliability, design and function and does not represent a
commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental,
or consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All
rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic, or other means in any form without prior written
permission of the manufacturer.
Trademarks
Intel is a registered trademark of Intel Corporation. AMI is registered trademarks
of AMI SOFTWARE INTERNATION, INC. Other product names mentioned
herein are used for identification purposes only and may be trademarks and/or
registered trademarks of their respective companies.

3/47 Version1.2
Contents
Chapter 1 – Introduction............................................................................................ 5
1.1 System Overview .......................................................................................... 5
1.1.1 System Outlook.................................................................................. 5
1.1.2 Rotating Angle.................................................................................... 6
1.1.3 System Maintain................................................................................. 6
1.1.4 I/O Ports................................................................................................ 7
1.2 Specifications ................................................................................................ 8
Chapter 2 – Packing List.......................................................................................... 12
Chapter 3 – Getting Started..................................................................................... 17
3.1 System setup ............................................................................................... 17
3.2 Hardware Installation................................................................................. 18
3.2.1 CPU Installation................................................................................ 18
3.2.2 Memory Installation......................................................................... 19
3.2.3 HDD Installation ............................................................................... 20
3.2.4 OS Installation .................................................................................. 21
3.3 Software Installation................................................................................... 22
3.3.1 Driver Installation ............................................................................ 22
3.3.2 Touch Panel Calibration................................................................. 24
3.4 Optional Items Installation........................................................................ 26
3.4.1 MSR / RFID......................................................................................... 26
3.4.2 Pole Display ...................................................................................... 30
3.4.3 2nd Display......................................................................................... 31
Chapter 4 – BIOS setup............................................................................................ 34
4.1 P4 M/B............................................................................................................ 34
4.1.1 Starting Setup................................................................................... 34
4.1.2 Resolution setup.............................................................................. 35
4.2 P3 M/B............................................................................................................ 37
4.2.1 Starting Setup................................................................................... 37
4.2.2 Resolution setup.............................................................................. 38
Chapter 5 – M/B Information................................................................................... 41
5.1 P4 M/B Jumper Setting.............................................................................. 41
5.2 P3 M/B Jumper Setting.............................................................................. 42
5.3 COM & RJ-11 Jumper Settings................................................................ 44
5.4 Cash Drawer Introduction......................................................................... 44
Chapter 6 – Reversion History............................................................................... 47

4/47 Version1.2
Introduction
Chapter 1
CHAPTER

5/47 Version1.2
Chapter 1 – Introduction
1.1 System Overview
1.1.1 System Outlook
zPower LED
HDD LED
LAN LED
zTFT LCD
zSpeakers
zHDD Case
zCustomer Display (Options)
zMSR (Options)
zMaintaining screws
zMounting hole for Pole Display or
2nd Display
zCOM RI/5V/12V selection
zSystem Fan

6/47 Version1.2
1.1.2 Rotating Angle
1.1.3 System Maintain
Remove 2 screws for
system maintain

1.1.4 I/O Ports
Number Description
1 AC Power Connector
2 VGA (For 2nd display only)
3 LAN
4 Printer Port (LPT)
6 Cash Drawer 2
7 Cash Drawer 1
8 PS/2 Mouse
9 PS/2 Keyboard
10 Audio
11 DC 24V (For Receipt Printer Power)
12 Power USB (24V)
13 Power USB (12V)
14 USB x 2
15 COM 1
16 COM 2
17 COM 3
5 COM 4

8/47 Version1.2
1.2 Specifications
System
Model SolidPOS 72 SolidPOS 75
P3 POS70-2EB-370 POS70-5EB-370
P4 POS70-5EB-478 POS70-5EB-478
Main Board
CPU P3: Intel Celeron / PIII 1.2GHz
P4: Intel Mobile Celeron 1.2GHz , Celeron 2.0GHz , P4
2.0GHz
Core Logic P3: VIA CLE 266 (VT8623+VT8235)
P4: Intel 852GM + ICH4
System Memory DIMM, DDR266/333, 128MB up to 1GB
OS Support Win2000, NT, Win XP, Embedded XP(XPe), WinCE,
WEPOS
Display
TFT LCD 12.1” 15”
Brightness 300 nits 250 nits
Resolution 800 x 600 1024 x 768
Touch Screen 7 Wire Resistive Type
Tilt Angle 0 ~ 90 Degree
Swivel Angle -20 ~20 Degree
Storage Device
HDD 1 x EIDE 3.5” Type
Compact Flash 1 x Slot Type II, Non-removable
I/O Ports
Serial 6 x RS-232
COM 1/ 2/ 3/ 4: DB-9, male, (Pin1 W/ DCD or 5V or 12V
Selectable, Pin 9 W/ RI or 5V or 12V Selectable )
COM 5/ 6: Internal for MSR and Touch Panel

9/47 Version1.2
Parallel 1 x DB-25, female, supports SPP/EPP/ECP
USB 4 x USB 2.0
2 x USB2.0
1 x USB2.0 W/ 12V
1 x USB2.0 W/ 24V
PS/2 Mouse 1 x 6-pin mini DIN
PS/2 KB 1 x 6-pin mini DIN
LAN 1 x RJ45, 10/100 Base-T, supports wake on LAN
VGA 1 x DB-15, female
Cash Drawer 2 x RJ11 (Power Pin 12/24V Selectable)
1x Audio Jack Out
Audio AC97 2.0 Compliant, Speaker 2W x 2
Expansion 1 x Mini PCI
Others
Power Input 220W ATX with 100 - 240 VAC input @ 50 - 60 Hz / 5A
Color Gray
Compliance FCC / CE / WEEE / RoHS
Weight(Kgs) 12 12.5
Dimension(mm) W x D
x H 340 x 275 x 350 370 x 277 x 405
Operating Temperature 5 ℃~ 40 ℃
Storage Temperature -20°C ~ 60°C
Storage Humidity 20% - 85% RH, non-condensing
Main Unit Ordering Information
POS70-2EB-370 12.1” TFT SolidPOS W/ Intel P3 Socket 370
POS70-2EB-478 12.1” TFT SolidPOS W/ Intel P4 Socket 478,
POS70-5EB-370 15” TFT SolidPOS W/ Intel P3 Socket 370,
POS70-5EB-478 15” TFT SolidPOS W/ Intel P4 Socket 478
Optional Accessories Ordering Information
A10400062RH 2nd Display 12.1” TFT LCD
A10400107RH 2nd Display 15” TFT LCD
A10400264RH Customer Display: LCD Pole Display, 20 x 2 characters,
RS-232 Type (Gray)
A10400265RH Customer Display: VFD Pole Display, 20 x 2 characters,
RS-232 Type (Gray)
A10400010RH MSR: 2 Tracks, KB Type
A10400009RH MSR: 3 Tracks, KB Type
A10400023RH MSR: 2 Tracks, RS-232 Type
A10400024RH MSR: 3 Tracks, RS-232 Type
A10400019RH I Button: PS/2 Type

10/47 Version1.2
A10400121RH MSR+ I Button: 2 Tracks, KB Type and I Button PS/2 Type
A10400120RH MSR+ I Button: 3 Tracks, KB Type and I Button PS/2 Type
A10400104RH MSR+ Smart Card: 3 Tracks, RS-232 Type and Smart
Card USB Type
A10400005RH RFID : RS-232 Type
A10400266RH WIRELESS LAN 802.11b/g MINI PCI MODULE W/
Antenna
20900001RH OS: Win XP Professional (English Version)
20900008RH OS: WinXP Home (English Version)
20900003RH OS: Win 2000 Professional (English Version)
20900002RH OS: WEPOS (English Version)

11/47 Version1.2
Packing List
Chapter 2
CHAPTER

12/47 Version1.2
Chapter 2 – Packing List
The unit comes securely packaged in a shipping carton. Please contact your dealer if you find that
anything is missing or damaged after examining the contents. The shipping carton should contain the
following standard items :
2.1 Standard Items
zMain Unit
zDriver CD (Include manual)
zPrinter power extension cable
(24V)

13/47 Version1.2
zIDE extension cable
zHDD & CD-ROM power
extension cable
zPower Cord (The picture varies
from the area you locate)

14/47 Version1.2
2.2 Optional Items
2nd Display
Customer Display (LED, VFD, LCD)
3-in-1 Card Reader (MSR, Smart
Card, i-Button)
RFID

15/47 Version1.2
MSR

16/47 Version1.2
Getting Started
Chapter 3
CHAPTER

17/47 Version1.2
Chapter 3 – Getting Started
3.1 System setup
Item Photo Description
1
Plug-in power cord
and connect with AC
power
2 Push “Start Button”

18/47 Version1.2
3.2 Hardware Installation
3.2.1 CPU Installation
Item Photo Description
1 Remove 2 screws
2
Install CPU and apply the
thermal adhesive
3 Install thermal module
P3 P4
P4P3

19/47 Version1.2
3.2.2 Memory Installation
The POS system supports memory up to 1 GHz with frequency of DDR266 and
DDR333.
Please follow the below procedures for installation.
1. Remove 2 screws from the system
2. Insert the memory module
Item Photo Description
1 Remove 2 screws
2
Install Memory module
P4P3

20/47 Version1.2
3.2.3 HDD Installation
Item Photo Description
1
Remove 2 screws from
HDD cover and pull out
the metal case.
2
Install HDD in the metal
case.
3
Slide the HDD into the
POS system and connect
IDE & Power Cable.
4
Screw 2 screws on the
HDD cover