Ecler eWAMPBT+ User manual

eWAMPBT+
COMPACT AMPLIFIERS
Stereo wall amplifier with media player and BT connection
USER MANUAL

2
TABLE OF CONTENTS
1. IMPORTANT SAFETY INSTRUCTIONS...........................................3
2. KEY FEATURES............................................................................6
3. FRONT PANEL ............................................................................7
4. STARTUP....................................................................................8
4.1. FM ............................................................................................. 8
4.2. SD .............................................................................................. 8
4.3. USB............................................................................................ 9
4.4. BT CONNECTION ....................................................................... 9
4.5. AUX INPUT & AUX OUTPUT .................................................... 10
5. MECHANICAL DIAGRAMS .........................................................10
6. REMOTE CONTROL...................................................................11
7. TECHNICAL SPECIFICATIONS .....................................................12
8. REAR PANEL.............................................................................13
9. INSTALLATION .........................................................................14
10. PACKING LIST...........................................................................15

3
1. IMPORTANT SAFETY INSTRUCTIONS
•Read this instructions manual careful and follow all the
indications and safety warnings.
•Keep the instructions manual in an easily accessible place
for consulting at any time when needed.
•Do not handle the device or alter any of its parts, including
the electrical connection, mechanical fastening and external
structure.
•Keep the equipment away from sources of heat such as
radiators, stoves or heaters.
•Do not install or store the equipment in damp environments
or in places near to water.
•Do not insert any object of any kind through the ventilation
grilles on the device housing nor through any opening that
may contain the same. Failure to comply with these
guidelines may lead to a high risk of electrocution.
•Make sure not to cover the openings for heat dissipation
located in the metal body of the equipment. Also, avoid
build up of dust on the same.
•Prior to connecting the equipment, check that the power
supply input is in accordance with the voltage shown on the
label.
•This device needs to be earthed. At all times, make sure to
use the power supply cable supplied with the equipment
and to always connect the jack into an earthed plug.
•Do not pull on the power supply cable to unplug it.
•Do not use, connect or disconnect the equipment with wet
hands or feet.

4
•Immediately disconnect the equipment from the power
supply in the event of noting any kind of breakdown or
damage to the same that may be hazardous. Then contact
the authorized technical service.
•Clean the equipment with a dry cloth or with neutral soap
and a slightly damp cloth. Avoid using detergents, solvents
or any other type of abrasive substance.
•Make sure that the equipment is disconnected from the
power supply, or put the power in the off position before
handling any of the inputs or outputs on the equipment.

5
WARNING: This symbol indicates risk of electric shock
inside the device. Under no circumstance should the device
be opened while powered up.
WARNING: This symbol indicates that precautions should
be taken when handling and connecting the device.
Observing certain indications in the instructions manual is
required..
WARNING: This product must not be discarded, under any
circumstance, as unsorted urban waste. Take to the nearest
electrical and electronic waste treatment centre.
NEEC AUDIO BARCELONA, S.L. accepts no liability for any damage
that may be caused to people, animal or objects due to failure to
comply with the warnings above.

6
2. KEY FEATURES
Built-in 2x10 WRMS high efficient amplifier @ 8 ohm (min.
load)
LED screen
Multiple music connection modes, including FM, micro SD, USB,
Bluetooth, AUX input and AUX output
Supports MP3, WMA, WAV and FLAC
Adjustable sensitivity of auxiliary input
Stereo AUX output
Can store up to 20 FM radio channels. Support automatic and
manual search
Wide voltage input, suitable for 100~240VAC, 50/60Hz
Remote control included
Surface-mount installation box included

7
Play/pause
Volume down
Previous
Mode (source selection)
Volume up
Next
Infrared receiver
Display
Micro SD
USB
Power ON
3. FRONT PANEL
WARNING: connect the AC terminals to electrical mains
supply before powering ON the device.

8
4. STARTUP
4.1. FM
Press Mkey to choose FM mode.
Automatic Search: long press to start the automatic channel search
and the system will automatically save the available radio stations.
Manual tuning mode: long press or to enter the manual tuning
mode; and then short press or to adjust the current channel.
After no key operation within 5 seconds, it will save the current
channel and leave manual tuning mode.
Mute: short press to mute FM playback.
Channel selection: short press or to navigate through saved
channels.
Volume control: short press +or -to increase or reduce the
current volume.
4.2. SD
Press Mkey to choose SD mode. If there is no SD card, the display will
show “NO” and flicker. If files are not supported or there are no files,
the display will show “----“.
Play control: to play/pause. Short press or to navigate
through songs. Long press to fast forward or fast reverse.
Volume control: short press +or -to increase or reduce the
current volume.

9
4.3. USB
Press Mkey to choose USB mode. If there is no USB device, the display
will show “NO” and flicker. If files are not supported or there are no
files, the display will show “----“.
Play control: to play/pause. Short press or to navigate
through songs. Long press to fast forward or fast reverse.
Volume control: short press +or -to increase or reduce the
current volume.
4.4. BT CONNECTION
Press Mkey to choose Bluetooth mode. If there is no connection, the
display will show “BT” and flicker. When the device is connected
successfully, “BT” will be always on. eWAMPBT+ is displayed in other
devices as ECLERXXXXXXXXX, where the last 9 digit numbers is the
device’s serial number. The password can be found in the rear side
label.
Play control: to play/pause. Short press or to navigate
through songs. Long press to fast forward or fast reverse.
Volume control: short press +or -to increase or reduce the
current volume.

10
86mm
86mm
38mm
10mm
4.5. AUX INPUT & AUX OUTPUT
Press Mkey to choose AUX1 input mode.
Play control: to play/mute. When it is muted, the display will
flicker.
Sensitivity adjustment: long press or to select S1 or S2
sensitivity adjustment. S1: input and output 500mV; S2: input
1000mV, output 500mV)
Volume control: short press +or -to increase or reduce the
current volume.
In addition, eWAMPBT+ features an aux audio output (AUX OUTPUT).
This stereo audio signal is identical to the powered signal, but with
LINE level (0dBV). Perfect to connecting an additional audio system
like a self-powered sub-woofer for bass reinforcement.
5. MECHANICAL DIAGRAMS