EcoFlow Solar Tracker User manual

EcoFlow Solar Tracker User Manual

2
Read all safety tips, warning messages, terms of use, and disclaimers carefully. Refer to
the terms of use and disclaimer at https://ecoflow.com/pages/terms-of-use and stickers
on the product before use. Users take full responsibility for all usage and operations.
Familiarize yourself with the related regulations in your area. You are solely responsible
for being aware of all relevant regulations and using EcoFlow products in a way that is
compliant.
DISCLAIMER

CONTENTS
1
15
15
16
1
2
2
6
8
11
12
13
13
14
14
14
15
15
16
16
1.1 What's in the box
1.2 Installation
--1.2.1 Solar Tracker Instrallation
--1.2.2 Using foldable solar panels
--1.2.3 Using rigid solar panels
1.3 Disassembly
1.4 Transportation
1.5 Using The Solar Tracker
--1.5.1 Positioning the Solar Tracker
--1.5.2 Turning on and off
--1.5.3 Emergency stop button
--1.5.4 Operation Modes
2.1 Specifications
2.2 Built-in battery
4.1 Power Status Indicator
4.2 Battery Level Indicator
1. Assembly Instructions
2. Specifications
3. Precautions
4. Light Indicators
16
5. Maintenance

1
1.1 What's in the box
1. Assembly Instructions
CONTROL MODULE LIGHT SENSOR MOTORIZED LEVER ARM
L-FEMALE L-MALE B-LEFT B-RIGHT
A1-MIDDLE A1-LEFT A1-RIGHT
A3-LEFT A3-RIGHT
SOLAR CHARGING CABLE FOR SOLAR
PANEL (0.92ft)
SOLAR CHARGING CABLE FOR
ECOFLOW UNITS (9.84ft)
A2
A4 A5

2
1.2.1 Solar Tracker Instrallation
1.2 Installation
1
L-FEMALE L-MALE
L-FEMALE
L-MALE

3
2
CONTROL MODULE
CONTROL MODULE

4
3
MOTORIZED LEVER ARM
A4
A2
A4
A2
MOTORIZED LEVER ARM

5
4
B-LEFT B-RIGHT
B-RIGHT
B-LEFT

6
5
A3-LEFT A3-RIGHT
A1-LEFT A1-RIGHT
1.2.2 Using foldable solar panels
A1-LEFT
A1-RIGHT
A3-RIGHT
A3-LEFT
*If you plan to use foldable solar panels, please continue with step 5 to 7 to finish installation.

7
6
7
Attach the foldable solar panel.
NOTE
Long press the power button. The indicator light will turn on. The solar tracker will begin rotating
according to the lighting conditions.
Solar Charging Port
MC4 Connectors
0.92ft
9.84ft

8
1.2.3 Using rigid solar panels
8
*If you plan to use the rigid solar panels, please continue with step 8 to 11 to detach
the folding bars and finish installation.

9
9
A5

10
10
NOTE
Long press the power button; The indicator light will turn on. The solar tracker will begin rotating
according to the lighting conditions.
MC4 Connectors
Solar Charging Port
0.92ft
9.84ft
11

11
1.3 Disassembly
Detach the control module from the base stand. Fold the legs of the base.
1
2
A3-LEFT
A1-LEFT
A1-RIGHT
A3-RIGHT
NOTE
Please fold A3-LEFT and A3-RIGHT first, and then fold A1-LEFT and A1-RIGHT.

12
1.4 Transportation

13
1.5 Using The Solar Tracker
1.5.1 Positioning the Solar Tracker
The Solar Tracker can rotate 345° therefore it has a 15° blind spot. That means if you're in the
northern hemisphere, you should position the front of the solar tracker to the east with a slight
northern tilt. If you're in the southern hemisphere, you should position the front of the solar tracker
to the east with a slight southern tilt.
NOTE
Please place the compass flat when positioning the Solar Tracker or use the compass on your
phone to guide the direction.
N
Northern hemisphere
S
Southern hemisphere

14
1.5.4 Operation Modes
1.5.2 Turning on and off
1.5.3 Emergency stop button
Mode changes
Turn on the tracker by pressing the power button for 3 seconds. A long beep indicates that it is
powered on.
Turn off the tracker by pressing the power button for 3 seconds. A long beep indicates that it is
powered off. The stand will rotate back to its starting position, and then shut down automatically.
The emergency stop button is the red button located on the top of the control module. Pressing it
will stop the motor immediately and you will hear the beep sound.
NOTE
Please note that the Solar Tracker won't be powered off if the solar panel is still connected and
getting solar power.
1
Sound indicator
Power on: Beeps (increasing speed) for 10 seconds
Return to starting position: Beeps once per second
Sleeping mode: Quiet
Searching for light: Beeps once per second
Standby: Quiet
Low light: Quiet
Strong light: Quiet
Manual: Beeps once per second
Shut down: Long beep, then beeps once per second
Emergency stop: Beeps five times per second
2
Returning to the
starting position
10s after no operation Minimal Weak
Weak
Weak
Over 15 min
Powering on Sleeping Finding
sunlight
Tracking
sunlight
Standby
Strong
Minimal: 0 to 25000 lux
Weak: 25000 to 50000 lux
Strong: 50000 to 80000 lux
Super strong: ≥80000 lux
Degree of Lightness

15
*The built-in battery can be recharged from solar power. If the Solar Tracker is not in use for a long
time, you can recharge the unit from the USB-C port (5 to 20V, 1A) port at the back of the Control
Module.
2. Specifications
2.1 Specifications
2.2 Built-in battery*
Battery chemistry
Shelf life
Lifespan
Operating temperature
NCM
1 year(after full charge)
500 cycles to 80% capacity
-10°C~40°C (optimal: 25°C)
Weight
Load capacity
Pitch axis range
Yaw axis range
Size
APP
Built-in battery capacity
Waterproof
Wind resistance
25KG
25KG
0–85°
0–345°
2.5 × 1.5 × 1.5m (Minimum 2.5 × 1.1 ×1.1m)
Supported
5000mAh
IP54
6 Strong Breeze
3. Precautions
Do not let the tracker become submerged.
It is recommended that the tracker be stored when the wind force exceeds 6.
Do not leave the tracker outside for wind forces over 8.
Do not let children under 12 operate the tracker alone, and inform them about the
emergency stop button.
Do not place heavy objects other than solar panels on the tracker.
Do not carry the tracker while it is in use.

16
5. Maintenance
If the Solar Tracker has not been used for a long time, please recharge the battery
to 30-50% every 3 months. You can check the battery level from the power status
indicator or on the App.
4. Light Indicators
Power on: Fast flashing (flash for 0.1s every 0.2s)
Working: Slow flashing (flash for 1s every 0.5s)
Sleep: Always on
NOTE
Please note that the Solar Tracker won't be powered off if the solar panel is still
connected and getting solar power. The light indicator will keep short flashing (flash
for 1s every 0.1s).
LED1Battery level
0
0~25%
25~40%
40~55%
55~70%
70~85%
＞85%
LED2 LED3
NOTE
Light indicator status: Off OnFlashing
4.1 Power Status Indicator
4.2 Battery Level Indicator

17