EcoFlow RIVER Pro User manual

Instore "130"youcanfind and buy almostall necessary goodsforyourauto in
Kyiv and other cities,delivery by ground andpostal services.Ourexperienced
consultantswill provide youwithexhaustive informationand helpyoutochose
the very particular thing. We are waiting foryou atthe address
https://130.com.ua
PHONES
0 (800) 800 130
(050) 462 0 130
(063) 462 0 130
(067) 462 0 130
Internet storeof
autogoods
CARRECEIVERS —Receivers •Mediareceiversandstations•Nativereceivers •CD/DVD changers •FM-modulators/USBadapters•Flashmemory•Faciaplates and adapters •Antennas •Accessories |
CARAUDIO —Car audiospeakers •Amplifiers•Subwoofers •Processors•Crossovers •Headphones•Accessories|TRIPCOMPUTERS —Universalcomputers •Modelcomputers •Accessories|
GPSNAVIGATORS —PortableGPS•Built-in GPS•GPSmodules •GPStrackers •Antennas forGPSnavigators•Accessories|VIDEO —DVR •TVsetsand monitors•Car TVtuners•Cameras •Videomodules
•Transcoders •Car TVantennas•Accessories|SECURITYSYSTEMS —Car alarms •Bikealarms •Mechanicalblockers •Immobilizers •Sensors •Accessories |OPTICANDLIGHT —Xenon•Bixenon •Lamps
•LED •Stroboscopes •OpticandHeadlights •Washers •Light,rainsensors •Accessories |PARKTRONICS ANDMIRRORS —Rear parktronics•Frontparktronics •Combined parktronics •Rear-viewmirrors
•Accessories |HEATINGANDCOOLING —Seat heaters •Mirrorsheaters •Screen-wipers heaters •Engineheaters •Auto-refrigerators •Airconditioningunits •Accessories |TUNING —Vibro-isolation
•Noise-isolation •Tintfilms •Accessories |ACCESSORIES —Radar-detectors•Handsfree,Bluetooth•Windowlifters•Compressors •Beeps,loudspeakers •Measuring instruments •Cleaners •Carsits
•Miscellaneous|MOUNTING —Installationkits •Upholstery•Grilles•Tubes•Cableand wire •Tools•Miscellaneous|POWER —Batteries •Converters •Start-chargingequipment•Capacitors
•Accessories |MARINE AUDIOANDELECTRONICS —Marinereceivers•Marineaudiospeakers •Marinesubwoofers •Marineamplifiers•Accessories |CARCARE PRODUCTS —Additives •Washer fluid •
Care accessories •Car polish •Flavors •Adhesives andsealants |LIQUIDANDOIL —Motoroil•Transmissionoil •Brakefluid •Antifreeze•Technicallubricant
SKYPE
km-130

User Manual
Contact us:
www.ecoflow.com
WARNING
1. Keep EcoFlow™ RIVER Pro (“RIVER Pro”) and the accessories
dry and DO NOT expose the product and accessories to high
heat.
2. Never disassemble, puncture, shock, crash, or incinerate the product.
3. Recycle and dispose of RIVER Pro in accordance with the
local regulations.
4. Pay attention to safety when handling the RIVER Pro.
5. Children or people with disabilities should use the RIVER Pro
under adult supervision.
EcoFlow RIVER Pro
Autogoods “130”
130.com.ua

The following terms are used in this document to indicate various levels of potential harm that may be caused
by improper operation.
Read the ENTIRE User Manual before operating. Failure to operate the product correctly may result in
damage to the product or personal property and cause serious injury. EcoFlow will not assume any legal
responsibility. DO NOT use the product with incompatible components or alter the product in any way
without following the instructions provided by EcoFlow. Otherwise, you cannot get after-sales service
from EcoFlow under warranty condition. These Safety Guidelines include instructions for safety, oper-
ation and maintenance. It is important to read and follow all the instructions and warnings in the user
manual before assembly, setup or use.
Product Use:
Product Safety Guidelines
Glossary
NOTICE
CAUTION
WARNING
WARNING
WARNING
1. DO NOT expose the product to any liquids. Do not immerse the product in water. DO NOT leave the batteries
out in the rain or near a source of moisture. Moisture in the RIVER Pro could cause short circuits, component
failure, fires or even explosions.
2. Never use NON-EcoFlow parts. Go to http://www.EcoFlow.com to purchase new parts. EcoFlow takes no
responsibilities for any damages caused by the use of non-EcoFlow parts.
3. Never install or remove other modules from the RIVER Pro when it is turned on. Do Not plug or unplug other
modules when the power of the product is turned on, otherwise the power interface may be damaged.
4. Using the product in environments above 140ºF (60°C) may cause fire or explosion. Using the product in envi-
ronments below -4ºF (-20°C) will severely affect the performance of the product. Allow the product to return to a
normal operating temperature before use.
5. DO NOT use the batteries in strong electrostatic or electromagnetic environments. Otherwise, the battery
control board may malfunction and cause a serious accident during use.
6. Never disassemble or puncture the product in any way. Otherwise, it may leak, catch fire, or explode.
7. DO NOT use the product if it was involved in a crash or a suered a forceful jolt.
The instructions, if not properly followed, may result in property damage and minor physical damage.
The instructions, if not properly followed, may result in property damage and serious physical damage.
The instructions, if not properly followed, may result in property damage, major accident and serious injury.
Read all safety tips, warning messages, terms of use and disclaimers carefully. Refer to the terms of use
and disclaimer at https://ecoflow.com/pages/terms-of-use and stickers on the product before use. Users
take full responsibility for all usage and operations. Familiarize yourself with the related regulations in your
area. You are solely responsible for being aware of all relevant regulations and using EcoFlow products in a
way that is compliant.
Improper use may result in fire, property damage or personal injury. Make sure to use the product
according to the following safety rules and guidelines.
Product Disclaimer
Autogoods “130”
130.com.ua

Travel Notice:
Product Maintenance:
Product Battery Disposal:
Product Storage and Transportation:
Product Charging:
You are now an EcoFlow RIVER Pro user. This brief pamphlet is meant to help you. Please take some time to
read it carefully before using the product.
RIVER Pro Use Care and Safety Guide
CONGRATULATIONS!
8. If the product falls into the water during use, take the product out immediately and put it in a safe and open
area. Keep a safe distance from it until it is completely dry. Never use it again and dispose it properly as
described in the Battery Disposal section below. If the product catches fire, it is recommended to use fire
extinguishing methods in the following order: water or water mists, sand, fire blanket, dry powder fire extinguish-
er, carbon dioxide fire extinguisher.
9. DO NOT put the product in a microwave oven or in a pressurized container.
10. Do Not allow pins, wires or other metal pieces to insert to the RIVER Pro case, outlets or controls. Metal piec-
es may short circuit the product.
11. Avoid collision. DO NOT place heavy objects on top of the RIVER Pro.
12. If there is dirt on any plug or outlet surface, use a dry cloth to clean it. Otherwise, it will cause abrasion and
result in energy loss or inability to charge.
1. Always use EcoFlow approved charging cables. EcoFlow does not take any responsibiliies for any damages
caused by using non-EcoFlow charging cables.
2. DO NOT use RIVER series portable power station AC charging cables on DELTA series power stations. Eco-
Flow takes no responsibilities for any damages caused by customers’ failure to follow instructions. Doing so will
void the warranty.
3. When charging, please place the RIVER Pro on the ground with no flammable or combustible materials
around. To prevent accidents, never leave the RIVER Pro unattended during charging.
4. DO NOT charge the product immediately after a long or heavy load, because the product temperature may
have become too high. DO NOT charge the product until it cools down to room temperature.
Do Not bring RIVER Pro on flights.
1. Dispose of RIVER Pro in specific recycling boxes only after a complete discharge. Batteries are hazardous
chemicals. Please strictly follow your local regulations regarding the battery disposal and recycling.
2. Dispose of the product if the power cannot be turned on after over-discharging.
1. Temperature for normal use and storage of this product is -4°F to 113°F (-20°C to 45°C) and temperature for
optimal use and storage of this product is 68°F to 77°F (20°C to 25°C).
2. If the product is not used for a long time, the battery life may be reduced.
3. Discharge RIVER Pro to 30%, then charge to 85% every 3 months to keep the battery healthy.
1. Keep the RIVER Pro out of the reach of children. If any children accidentally swallow parts, please seek medical
attention immediately.
2. If a low-battery warning appears, charge the product before storing it. Otherwise, long-term storage may cause
damage to the batteries in the product. Batteries in the product will enter hibernation mode if they are depleted
and stored for a long time. Recharging the product can bring the battery out of hibernation.
3. DO NOT place the product near a heat source or under high temperature, such as inside a car in direct sunlight,
a fire source, or an operating stove.
4. Store the product in dry environments. Please keep it way from water.
5. Make sure no objects can fall on or around the product while it is being stored.
6. Never ship a product with a battery power level higher than 30%.
Autogoods “130”
130.com.ua

FCC Statement:
FCC Radiation Exposure Statement:
This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This product may not cause harmful interference, and
(2) This product must accept any interference received, including interference that may cause undesired
operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
1. Orient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
NOTICE
NOTICE
To turn RIVER Pro on or off, you need to PRESS and HOLD the ON/OFF system Power Button. To turn on the
AC power outlet, you need to PRESS and HOLD the AC Power Button after turning on RIVER Pro. We set the
AC power button for users to turn off AC power when they don’t need it and save power. Please follow this
introduction step-by-step to be familiar with each of RIVER Pro’s ports, buttons, display screens and more.
Please fully charge (100%) your RIVER Pro before use it.
Autogoods “130”
130.com.ua

EcoFlow App Download Guide 1
2
4
8
9
10
13
14
14
Features of the RIVER Pro
LCD Display Introduction
Solar Panel Connection
Entry-Level UPS
AC X-Boost Mode
RIVER Pro and RIVER Pro Extra Battery Connection
Technical Specifications
How to Recharge RIVER Pro
FAQs
What’s in the Box
CONTENTS
11
12
Autogoods “130”
130.com.ua

1
Search “EcoFlow” in the Google Play Store or App Store to download the App.
You may also use your mobile phone to scan this QR code or enter the download link in
your browser:
https://ecoflow.com/pages/ecoflow-app
1. Download the EcoFlow App
EcoFlow App Download Guide
2. For more information about the App, please follow the instruction on the App or
our official website www.ecoflow.com.
Privacy Policy
By using EcoFlow Products, Applications and Services, you consent to the EcoFlow Term of
Use and Privacy Policy, which you can access via the “About” section of the “User” page on the
EcoFlow App or on EcoFlow Official website at https://ecoflow.com/pages/terms-of-use and
https://ecoflow.com/pages/privacy-policy .
Autogoods “130”
130.com.ua

2
AC ON/OFF
Displays various conditions of the product.
Charge a wide array of devices such as smart phones, tablet, GoPro, speakers, or anything else that could be
charged through USB-A Port. The USB-A output icon will appear on the LCD display when a USB-A port is in use.
1. LCD Display
220-240V region*Dedicated AC Output
2. USB-A Output Ports
Features of the RIVER Pro
*EcoFlow has designed different AC output sockets
following the local regulations of different countries.
7
9
8
11
10
15
141312
16
1
2
3
65
4
1. LCD Display
2. USB-A Output Ports
3. ON/OFF Button of LED Light
4. IOT Reset Button
(PRESS & HOLD 3s to reset Wi-Fi)
5. USB-C 100W Output Port
6. Power Button & LCD Display Screen
ON/OFF & Display Screen Power Indicator
7. DC Output ON/OFF Button (Car
Outlet, 2 DC 5521 Output Ports) & DC
Output Indicator
8. Fast Charge USB-A Output Port
9. AC Power Button (PRESS for ON/
OFF) & AC Output Indicator
10. 3 AC Output Sockets (100-120V)
2 AC Output Sockets (220-240V)
12. X-Stream Charging Input Port
13. Overload Protection Switch
14. Solar Charge/Car Charge Input Port
15. Power Earth Screw
16. Expansion Power Port
11. Ventilation Fan
Expansion Power Port
Autogoods “130”
130.com.ua

3
3. ON/OFF Button of LED Light
4. IOT Reset Button (PRESS & HOLD 3s to reset Wi-Fi)
5. USB-C 100W Output Port
6. Power Button & LCD Display Screen ON/OFF Power Indicator
7. DC Output Port (Car Outlet, 2 DC 5521 Output Ports) & DC Output Indicator
8. Fast Charge USB-A Output Port
9. AC Power Button AC Output Indicator
10. 3 AC Output Sockets (100-120V) / 2 AC Output Sockets (220-240V)
11. Ventilation Fan
There’re three types of LED light: low light, strong light, and SOS rescue signal flash. Press it once to turn on
the low light; press it twice to turn on the strong light; press it one more time to turn on the SOS rescue signal
flash; then press it again to turn off the LED light. Long press can turn off the LED directly.
When you first use IOT function or you are changing the network environment, you need to press and hold IOT
Reset button for 3 seconds to reset the Wi-Fi. It can connect with the mobile phone, then reconfigure the
wireless network through the APP. When using the IOT mode, make sure the power station has sufficient
amount of power or is connected to a power source to keep IOT standby.
Devices that charge through a USB-C port, such as a MacBook Pro, Android phone, can be charged by the RIV-
ER Pro USB-C port. The USB-C Output icon will appear on LCD Display when the USB-C port is in use.
The USB-A output icon will appear on the LCD display when the port is in use. Fast charge-enabled devices can
be charged at a maximum speed of 28W. If your device does not support fast charging, the device will charge in
a normal speed.
The AC power button controls the AC output of the RIVER Pro. The AC power needs to be turned on manually.
To enable AC power, press the AC power button. When AC power is not in use to charge a device, press the AC
power button to turn off the AC power. Make sure to unplug the power cord from the AC port. When the AC
power of the RIVER Pro is enabled, the AC indicator will light up. If the AC power is not used for more than 12
hours, the AC ports will turn off automatically.
Charge devices that require a 220-240V (220-240V region)/100-120V (100-120V region) wall charger such as
laptops, TVs, refrigerators, vacuums, etc. The X-Boost feature enables the built-in 600W inverter to support
600W to 1200W devices by lowing their power required. This feature does not support all electrical devices with
higher power rating, please test to confirm before use. It is not recommended to use the RIVER Pro to power
heavy-duty devices e.g., air conditioners, coffee machines, clothes dryer, electric camp stoves, full size refrigera-
tors, microwaves, mowers, ovens, washing machines etc.
Press DC ON/OFF to turn on or off RIVER Pro DC power. The DC power button controls the RIVER Pro's car
charger output and two direct currents (DC 5521) outputs. The car charger output supports an output up to 10A,
which is sufficient to power most electrical appliances used in vehicles. When the DC ON/OFF switch is on, the
product will not shut down on its own until it runs out of power.
Press the system power button once to turn the RIVER Pro on. Press and hold the system power button to turn
the RIVER Pro off. When RIVER Pro is turned on, the power indicator is in breathing mode, and the display is on;
When the RIVER Pro is running, you can switch on or off the display screen by pressing the Power Button once.
When RIVER Pro senses that any output port is in use, the display will automatically light up. The RIVER Pro
screen will enter into the sleep mode after being in idle for more than 5 minutes, but the battery will still be run-
ning. The system standby time is 2 hours by default. You can set up the system standby time and screen standby
time via the App.
The fan prevents RIVER Pro from overheating. Please make sure nothing blocks the vents at both ends of the
RIVER Pro.
Autogoods “130”
130.com.ua

4
Plug in the AC Charging Cable into the port and connect the AC Charging Cable to an AC power source. The
U.S. and Japanese version support 100Vac-120Vac (50Hz/60Hz) / international version supports 220Vac-
240Vac (50Hz/60Hz) charging.
When the input current continuously exceeds 10A during a charge, the AC charging port will trigger the
overload protection (the Overload Protection Switch button will automatically pop out). When the product is
confirmed to be normal, press the overload protection switch button to continue charging.
Plug in the Expansion Power Cable into this port to connect your RIVER Pro to a RIVER Pro Extra Battery to
expand the battery capacity to 1440Wh.
12. X-Stream Charging Input Port
13. Overload Protection Switch
14. Solar Charge/Car Charge Input Port
16. Expansion Power Port
LCD Display
Connect at most two 110W solar panels in parallel to recharge RIVER Pro. RIVER Pro supports a solar input of
10-25V, 200W, 12A Max. RIVER Pro supports 12V car charge up to 8A. (Remember to start the engine when you
charge via car charge, otherwise, the car battery may be drained.) Do not use the same cigaratte lighter port to
charge other devices when recharging RIVER Pro. The RIVER Pro outlets can still be used to charge your devic-
es when the RIVER Pro is recharging via car charge.
15. Power Earth Screw
For safety reasons, some eletrical appliances need to be grounded. The power earth screw provides an option to
get your RIVER Pro grounded using a grounding cable.
i
j
k l m n o p
Autogoods “130”
130.com.ua

5
d. High Temperature Indicator
e. Low Temperature Indicator
f. Fan Indicator
g. Current Input
h. Current Output
i. Overload Warning
Port Usage Indicators
The RIVER Pro fan speed is intelligently controlled by the RIVER Pro, and the displayed speed is related to
the fan speed.
Shows the current input power of RIVER Pro in watts.
Shows the current output power of RIVER Pro in watts.
The overload icon appears along with a second icon indicating what part of the RIVER Pro is in an overload condition.
Shows the percentage of the power. If it displays 0%, please charge RIVER Pro immediately.
b. Battery Level Indicator
c. Battery Level Percentage
Shows the remaining power. The icon rotates while charging. If the remaining power is equal to 0%, the icon
will flash to indicate a low battery warning. In this case, recharge the product.
When the temperature of the RIVER Pro is too high, a high-temperature warning icon appears on the screen
to warn that the temperature of the product is too high. Please cool down the product.
When the temperature of the RIVER Pro is too low, a low-temperature warning icon appears on the screen to
warn that the temperature of the product is too low. Please warm up the product properly before use.
Battery Indicator
Refers to the battery
The number indicates the remaining charge/discharge time (in minutes) for RIVER Pro.
a. Remaining Charge/Discharge Time
When the SOC (State of Charge) is set in the EcoFlow App, the UPS icon
will appear on the screen.
The Extra Battery icon will appear when Extra Battery is connected to the
main model.
The AC indicator icon will appear when the AC power button is turned on.
The USB-A output icon will appear on the LCD display when a USB-A port is in use.
The USB-C output icon will appear on the LCD display when a USB-C port is in use.
The Car Power Output icon will appear on the LCD display when a Car Output
port is in use.
The icon will appear when the unit is connected to the App.
Extra Battery Indicator
AC Indicator
USB-A Indicator
USB-C Indicator
IOT Indicator
Car Power Output Indicator
UPS Indicator
j
k
l
m
n
o
p
Autogoods “130”
130.com.ua

6
Protection Information Instruction
USB-A Overload
Protection
USB-A and OVERLOAD icons flash together.
Disconnect all electrical appliances and wait 10
seconds before adding each appliance back.
The RIVER Pro display screen uses different icons and combined icons to indicate the reason for protection.
USB-C High Temperature
Protection
High Temperature
Recharge-protection
High Temperature
Discharge-protection
Low Temperature
Recharging-protection
Low Temperature
Discharge-protection
Overload
Recharging-protection
Overload
Discharging-protection
Communication Failure
between Main Board and
BMS
USB-C and High-Temperature icons flash together.
Disconnect electrical appliance and let RIVER Pro cool
down before adding appliance back.
RECHARGING TIME, Exclamation and High-Temper-
ture icons flash together. This will happen especially
when you recharge the RIVER Pro immediately after
a heavy battery use. Disconnect Charging Cables
and all electrical appliances and wait until RIVER Pro
has cooled down before plugging Charging Cable
back in and recharging.
Exclamation and High-temperature icons flash
together. Turn OFF System Power and let RIVER Pro
cool down before turning the System Power back on.
Recharging Time, Exclamation and Low-Temperature
icons flash together. Disconnect Charging Cables and
all electrical appliances and place RIVER Pro in warm-
er place before plugging Charging Cable back in and
recharging.
Exclamation and Overload icons flash together.
Disconnect all electrical appliances, restart RIVER Pro,
and add each appliance back in in turn. Please note
that electrical appliances must be operated within
rated power.
Light stays on
USB-C Overload Protection
USB-C icon and the OVERLOAD icon flash together.
Disconnect electrical appliance and wait 10 seconds
before adding appliance back.
Exclamation and Low-Temperature icons flash
together. Turn OFF System Power and place RIVER
Pro in warmer place before turning the System Power
back on
RECHARGING TIME, Exclamation and OVERLOAD
icons flash together. Unplug Charging Cables, re-
start RIVER Pro and plug back in.
Only the Exclamation icon is flashing. Restart RIVER Pro.
The Exclamation icon is on. Restart RIVER Pro.
Autogoods “130”
130.com.ua

7
Communication Failure
between Main Board and
AC
Inverter Output Overload
Inverter High Temperature
Protection
Inverter Low Temperture
Protection
Fan Blockage
Car Charger Overload
Car Charger High
Temparature Protection
AC icon Flashes. Restart RIVER Pro.
AC and Overload icons flash together.
Turn off RIVER Pro. Unplug all appliances. Wait 10
seconds, turn System Power ON then AC Power
ON and plug each appliance back in in turn. If the
icons keep flashing, do not charge or discharge
the unit. Please note that electrical appliances
must be operated within rated power. (For more
information about X-Boost function, go to P10.
AC and High-temperature icons flash together.
Turn off RIVER Pro and let it cool down. Then turn
System Power On and AC Power On.
The AC and Low-Temperature icons flash together.
Turn off RIVER Pro, move RIVER Pro to a warmer
place and wait for the inverter to warm up. Then turn
System Power On and AC Power On.
Fan icon flashes. Turn Off RIVER Pro and carefully
clean and vacuum around vents at both sides of the
RIVER Pro. Turn System Power On.
Car and OVERLOAD icons flash together.
Restart RIVER Pro, and make sure that electrical appli-
ances must be operated within rated power.
Car and High-Temperature icons flash together.
Turn RIVER Pro off and let it cool down. Turn System
Power On then DC Power On.
*If the product is not operating properly or the icon keep flashing, please contact the customer support
team. Do not charge the unit.
Autogoods “130”
130.com.ua

8
Solar Panel Connection
How to recharge the RIVER Pro using solar panels?
e.g.1
RIVER Pro Charging Port
RIVER Pro Charging Port
XT60 Connector
XT60 Connector
RIVER Pro
SOLAR PANEL-21.6V X2
MC4 Connector
SOLAR PANEL-21.6V
Solar MC4 parallel connection cable
* The solar panels and related parallel connec-
tion accessories are sold separately.
RIVER Pro
1. Recommend Charging Method
e.g.2(Only supports parallel connection, NOT serial connection)
If you need to know more about the connection of solar panel, please refer to the Solar Panel User Guide.
Here we focus on demonstrate how to connect RIVER Pro to 1 set of solar panel or connect RIVER Pro to 2 sets
of solar panels in parallel. The RIVER Pro can support a 10-25V DC input. When the input exceeds 25V, the RIV-
ER Pro's overvoltage protection will be triggered. Overvoltage may damage the product. Users should follow
these instructions. EcoFlow DO NOT provide free repair services for any product damage caused by connecting
too many solar panels to the product or incorrect connection, even during the warranty period.
Users can connect a solar panel (do not connect more than one in series) as shown in Example 1. Connect the
solar panel to the MC4 to XT60 Solar Charging Cable. Connect the XT60 connector to the RIVER Pro’s XT60
input to charge the RIVER Pro. Users can connect up to 2 sets of solar panels in parallel to the MC4 port as
shown in Example 2. If you want to connect 2 sets of solar panels, And connect the MC4 parallel connection ca-
ble to the MC4 to XT60 Solar Charging Cable. Then connect them with our solar MC4 parallel connection cable.
Connect the XT60 connector to the RIVER Pro’s XT60 input to charge the RIVER Pro. The parallel connection
cable is an optional accessory that is sold separately.
Autogoods “130”
130.com.ua

9
2. RIVER Pro supports the use of third-party solar panels (DIY solution)
SOLAR CABLE
SOLAR PANEL
-
+ +
-
RIVER Pro Entry-level UPS Use Reminder
Entry-Level UPS User Guide
Users can buy universal solar panels of MC4 connection standard on their own to power RIVER Pro, as long
as the voltage and current (10-25V DC, 12A Max) comply with the specifications of RIVER Pro, the panels will
be able to recharge RIVER Pro through the MC4 to XT60 conversion cable. However, EcoFlow do not provide
free repair services for any damages to the product caused by the quality issue or improper operation of the
third-party solar panels, even in the warranty period.
Users can connect the AC Charging Cable of RIVER Pro to an AC power source and connect a device to RIVER
Pro and turn on the AC Power Button to automatically enter the entry-level UPS mode. When the AC power
source is cut off, power will be supplied from the battery of RIVER Pro to your device (as shown below).
Entry-Level UPS
RIVER Pro's X-Stream system supports an entry-level UPS function. User can use the RIVER Pro AC socket while
the RIVER Pro is connected to an AC power source (your devices or appliances connected the RIVER Pro AC sock-
et will get power from the AC power source, not the RIVER Pro battery). When the AC power source loses power
suddenly, the RIVER Pro will switch to provide power to the devices and appliances connected to it in <30ms.
This is considered as an “entry-level” grade UPS function that does not support 0ms switching. Do NOT connect
devices with strict uninterrupted power supply requirements. Perform multiple tests to confirm compatibility
before connecting devices such as data servers and workstations with RIVER Pro. EcoFlow will not be responsible
for any loss of data or equipment damages caused by customers’ failure in following the instruction. In accordance
with the UL2743 standard, the AC outlets of the RIVER Pro are in a double blade, ungrounded configuration, it is
recommended to use the UPS function only for temporary emergency usage rather than for long-term usage. DO
NOT connect the RIVER Pro to devices or electrical appliances with bare metal when charging to avoid the risk of
electric shock.
* UPS is only applicable to electrical appliances below 600W. To avoid an Overload condition, do not attempt
to power any equipment drawing more than 600W of power. EcoFlow will not be responsible for any loss of
data or equipment damages caused by careless use or customers’ failure to follow the instructions. Only one
RIVER Pro can conduct the UPS function; the UPS function is not available when more than one RIVER Pro is
connected together. Please follow the connection instructions below:
Autogoods “130”
130.com.ua

10
AC X-Boost Mode
With the built-in 600W inverter, you can use the X-Boost feature to power 600W-1200W appliances without the dis-
ruption caused by overload protection. Traditional inverters will overload when one electrical appliance with a higher
rated power is connected. Meanwhile, RIVER Pro’s built-in inverter, which has the X-Boost feature, enables the power-
ing of 600W-1200W electrical appliances. Please take note of the following when using this mode:
1. The X-Boost mode is enabled by default. You can use the EcoFlow app to turn this function on/off.
2. The X-Boost mode is not available in the following situations: the charging state and X-Boost mode off state.
3. When using appliances with a rated power of 600W-1200W, please connect only one appliance. When connecting
more than one electrical appliance, the change of voltage may affect the usage of other electrical appliances. *
* You may use electrical appliance with heating elements and a rated power between 600W-1200W, such as hair
dryers and electric kettles. But the X-Boost mode is not suitable for all electrical appliances.
Some appliances with a rated power of 600W-1200W that have strict voltage requirements are still not compati-
ble. Please conduct a full test to confirm before usage.
It is not recommended to use the RIVER Pro to charge heavy-duty devices, such as air conditioners, coffee ma-
chines, clothes dryer, electric camp stoves, full size refrigerators, microwaves, mowers, ovens, washing machines
etc.
Autogoods “130”
130.com.ua

11
Expansion Power Cable
RIVER Pro and RIVER Pro Extra Battery Con-
nection
Get the RIVER Pro , RIVER Pro Extra Battery and Expansion Power Cable ready. Power off both the RIVER Pro
and RIVER Pro Extra Battery before attempting to connect them together. If the products are not turned off, they
cannot be successfully connected. Then follow the steps below.
1. Open the Expansion Port cover below the AC port of the RIVER Pro to access the Expansion Power Port. Con-
nect the Expansion Power Cable to the port. Tighten the screws on both sides of the port to secure the connec-
tion.
2. Open the Expansion Port cover of the RIVER Pro Extra Battery to access the Expansion Power Port. Connect
the free end of the Expansion Power Cable to the RIVER Pro Extra Battery Expansion Power Port. Tighten the
screws on both sides of the port to secure the connection.
3. Turn on the power button of the RIVER Pro or RIVER Pro Extra Battery. If the display of the RIVER Pro shows
the extra battery icon, the connection is successful. Fully charge the products for the first time and ensure the
voltage is consistent to maximize the performance.
* Not included in the package, this cable only
comes with RIVER Pro Extra Battery
1
2
3
Autogoods “130”
130.com.ua

12
Technical Specifications
General Specs
Outputs
Input
Net Weight
Dimensions
Capacity
Testing and certification
AC Output (x3) /
(x2 International Version) Full Sine Wave
USB-A Output (x2)
USB-A Fast Charge (x1)
USB-C Output (x1)
Car Power Output (x1)
DC5521 Output (x2)
Solar Charge Input
Car Charger (Example 2)
AC Charge Input Power (Example 1)
AC Charge Input Voltage 100-120Vac (50Hz/60Hz)
International Version 220-240Vac (50Hz/60Hz)
200W 10-25Vdc 12A Max
12Vdc 8A Max
X-Stream Charge 660W Max
600W (Surge 1200W) total, 120Vac (50Hz/60Hz) /
230Vac (50Hz/60Hz)
5Vdc, 2.4A, 12W Max, per port
5Vdc, 9Vdc, 12Vdc, 2.4A, 28W Max
5Vdc, 9Vdc, 12Vdc, 15Vdc 20Vdc, 5A, 100W Max
136W, 13.6Vdc, 10A Max
13.6Vdc, 3A Max (per port)
* 16.8 lbs (7.6kg)
* 11.4 x 7.1 x 9.3 in (28.9 x 18.0 x 23.5 cm)
720Wh (28.8V)
UL Standard, CE, FCC, RoHS, RCM
Battery
Cell Chemistry
Discharge Temperature
Charge Temperature
Shelf Life
Cycle Life
Lithium-ion
-4°F to 140°F (±5°F), -20°C to 60°C (±3°C)
32°F to 113°F (±5°F), 0 to 45°C (±3°C)
1 Year (after fully charged)
800 cycles to 80%+ capacity
* Please Note: The above weight, size, etc. have certain measurement errors. Please refer to the actual
measurement.
Autogoods “130”
130.com.ua

13
AC Charging Cable
Car Charging Cable
Example 1:
Example 2:
How to Recharge RIVER Pro
<2 hrs
<8 hrs
660W Max
X-Stream charging
Car Charger
(96W Input)
How do I recharge my RIVER Pro?
Can RIVER Pro power my devices while it's charging?
RIVER Pro has an AC charging port and an XT60 charging port located on the side. The RIVER Pro can be
charged via AC power, 12V car charger or solar panels.
Yes, RIVER Pro can output power while being charged.
0-80% charged in 1 hour
0-100% charged in 1.6 hour
0-100% charged less
than 8 hours
(AC Charging Cable included)
(Car Charging Cable
included)
FAQs
How do I clean RIVER Pro?
The RIVER Pro is a versatile tool on many adventures, simple cleaning will likely be required from time to
time. Use dry, non-abrasive cloths to wipe. If you need to clean more thoroughly, we recommend that you use
detergent that is used for cleaning mobile phones and computer screens. DO NOT expose RIVER Pro to large
amount of liquid.
Autogoods “130”
130.com.ua

14
How do I store RIVER Pro?
How do I use RIVER Pro safely?
Can it be upgraded?
Please store RIVER Pro in a dry and cool place. DO NOT place it near water. Please turn off the RIVER Pro
and store it within its recommended use and storage temperature range. If you need to store the RIVER Pro
for a long time, please discharge the RIVER Pro to 30%, then charge it to 85% every 3 months.
Please use RIVER Pro within its recommended operating temperature range. Using RIVER Pro out of the
recommended operating temperature range may cause RIVER Pro to exceed its safe and effective working
limits. RIVER Pro is not waterproof. DO NOT immerse RIVER Pro in water. Doing so will void the warranty. If
RIVER Pro power electrical devices with heating elements (600W) for over a half hour, it is normal to see the
high-temperature protection icon. Please wait for about 1 hour before charging the River Pro, or using it to
power devices again.
RIVER Pro
User Manual and
Warranty Card
DC5521-DC5525
Cable
AC Charging Cable
(Input)
Car Charging Cable
(Input)
Solar Charging Cable
(MC4 to XT60 Input)
What’s in the Box
The firmware can be upgraded using the EcoFlow App. Turn on the RIVER Pro before firmware upgrade. It is
recommended that the RIVER Pro is connected to an AC power source or has about 50% battery level when
upgrading. Please do not use RIVER Pro to recharge your appliances and devices during firmware upgrade.
For more details, please refer to “How to upgrade firmware” FAQ in the EcoFlow App.
EcoFlow™ is a trademark of Shenzhen EcoFlow Technology Limited (abbreviated as “EcoFlow”) and its affili-
ated companies.
Autogoods “130”
130.com.ua