Economic Holland Aerolet Vertical Safety guide

1
Aerolet Manual+Installation Tilting + Vertical - CB-6 - version: 04 - Eng - March 2015
Aerolet®
Toilet lift
The ergonomic toilet-aid
Manual and Installation
TILTING VERTICAL
®
Aerolet made by Economic Holland b.v

2Aerolet Manual+Installation Tilting + Vertical - CB-6 - version: 04 - Eng - March 2015
Specifications
Data of your own toilet lift are:
Measurements: Vertical Tilting
Width 69 cm 68 cm
Depth 56 cm 56 cm
Heighest position
When toiletbowl = 39,5 cm 80 cm 75 cm
When toiletbowl = 50 cm 90 cm 88 cm
Height adjustments:
Bowl height : 39,5 - 52 cm
Arm supports : 73 - 113 cm
Lower leg length : 36 - 53 cm
Net weight : 33 Kg
Length power-cable : 275 cm
Max. load : 150 Kg (330 lbs)
Max. load : 250 Kg (550 lbs) (Aerolet type Bariatric)

3
Aerolet Manual+Installation Tilting + Vertical - CB-6 - version: 04 - Eng - March 2015
Table of contents
Specifications of your own Aerolet........................................................2
Preface..................................................................................................4
Cleaning & maintenance of the Aerolet................................................5
Basic-structure of the Aerolet................................................................6
The Aerolet wire diagram......................................................................7
Important information............................................................................8
Guarantee and repair............................................................................9
Formation of an Aerolet.......................................................................11
Operation instructions..........................................................................13
Removal and installation of the covers................................................15
Prepair the Aerolet for a “height” toilet.................................................17
Installing the Aerolet on a toilet bowl....................................................19
Installing the Aerolet in combination with a Bidet-system....................21
Installing the Aerolet on a Geberit Bidet WC 7000-system.................23
Installing the Aerolet on a AquaClean8000plus - system....................25
Installing the Vertical Aerolet on a toilet bowl......................................27
Setting the rise of the Aerolet..............................................................29
Examples of height adjustments.........................................................31
Setting the Aerolet arm supports........................................................ 33
Troubleshooting..............................................................................34-35
Note.....................................................................................................36

4Aerolet Manual+Installation Tilting + Vertical - CB-6 - version: 04 - Eng - March 2015
Preface
Dear user,
Congratulation on your purchase of the Aerolet toiletlift.
®
This state of the art assistive device has been delivered to you
with great pride in its design and quality materials.
The revolutionary design concept of the Aerolet has evolved
®
from years of research and development.
We are confident that you, the user, will find your Aerolet is
®
easily maintained, attractive and ergonomically correct.
The multiple adaptations and adjustments of the Aerolet can
®
be custom fitted for a specific person or adjusted to
accommodate multiple users.
The ideal support of the Aerolet moves the trunk forward as
®
the users center of gravity is brought above the feet while the
knee and hipjoints simultaneously straighten to a normal,
natural standing position.
Your toilet can always be used with the toiletlift in its down
position by those that do not require the Aerolets assistance to
®
stand. After proper installation of your toiletlift by your certified
dealer the Aerolet is ready for use.
®
!This Manual contains important information for installation,
use and maintenance of the Aerolet .
®
The installer and user should read this manual carefully before
installing or using this product. Should you have any questions
regarding the Aerolet after its installation, please contact your
®
dealer or installation company.

5
Aerolet Manual+Installation Tilting + Vertical - CB-6 - version: 04 - Eng - March 2015
Cleaning & maintenance of Aerolet
• The Aerolet is designed for easy cleaning.
Warning !
Unplug the Aerolet from the GFCI when cleaning the lift.
The Aerolet should be cleaned with each routine bathroom
cleaning.
•Do not use chlorine bleach and/or hydrochloric acid (scale
solvents) based products to clean the lift.
Warning !
The lift may NEVER pour over with water or be
watered with high water-pressure.
•Do not clean under the covers with liquids.
• The covers can be cleaned with a moisture tissue on the outside.
The Aerolet doesn’t need periodical inspection and is
maintenance free concerning mechanical parts.
!The Aerolet grant only "Pressalit" toilet seats as they are
custom fit to the lift.
• When the seat is damaged, please contact your certified
professional for assistance.
• When replacing the Aerolet please subject the lift to
,
inspection and testing by your certified professional dealer.

6Aerolet Manual+Installation Tilting + Vertical - CB-6 - version: 04 - Eng - March 2015
Basic-structure of the Aerolet toilet lift

7
Aerolet Manual+Installation Tilting + Vertical - CB-6 - version: 04 - Eng - March 2015
The Aerolet wire diagram

8Aerolet Manual+Installation Tilting + Vertical - CB-6 - version: 04 - Eng - March 2015
Important information
Never change lift settings yourself, but leave this to an
authorized person.
Lift repairs may only be done when power is off !
Your Aerolet toilet lift is absolutely no toy !
®
Pay special attention to warning symbols used in
this manual.
Cimproper use may cause injury to the user !
Cimproper use may cause damage to the Aerolet !
®
Danger of hand-jam.
NOTE - HOT PLUGGING !!
Removing or adding any OPENBUS cables are not
allowed when the CB is powered by
mains supply!
If needed anyway follow the below procedure:
1. Remove mains and wait 5 sec.
2. Mount or dismount the required cables
If this procedure is NOT followed it may result in
damaged OPENBUS driver circuit.
The risk of a damaged circuit increases if the accessory
has a high start current (in rush current).

9
Aerolet Manual+Installation Tilting + Vertical - CB-6 - version: 04 - Eng - March 2015
Guarantee and Repair
Economic Holland b.v. guarantees the Aerolet against material
®
and manufacturing faults from 24 months from the purchase day.
The guarantee period starts from the delivery- or the installationday
when placed by an authorized dealer.
During this guarantee period the authorized dealer will replace or
repair at his own choice the faults.
Exclusions
Your Aerolet guarantee is not applicable on faults which will
®
result in the following:
• wrong or inadequate maintenance by the user.
• unauthorized adjustments and/or adaptations or misuse.
• usage outside the environment-specifications wherefore
the product is meant for.
Repair
Repairs must only be carried out by an authorized person.
Parts under guarantee must also be returned to
Economic Holland b.v.
Warning !
When the Aerolet will be opened unauthorized, there is a risk
®
of subsequent malfunction.

10 Aerolet Manual+Installation Tilting + Vertical - CB-6 - version: 04 - Eng - March 2015
VIEW FROM ABOVE OF SEVERAL FORMATIONS

11
Aerolet Manual+Installation Tilting + Vertical - CB-6 - version: 04 - Eng - March 2015
Formation of an Aerolet toilet lift
CFor installing the strip of the lift a minimum of 105 mm is needed
from the wall to the center mounting holes in the bowl (where the
existing toilet seat was mounted)
CTo each side of the Aerolet , a 50 mm space is necessary to
®
adjust the lift-rise settings.
CThe diagram below gives an example of where the GFCI (ground
fault circuit interruptor) can be installed.
WARNING!
During the rise, the frame-seat will move a maximum of 45 mm
backwards leaving a free space of about 25 mm between the
frame-seat and the wall with a height of 880 mm.
WARNING! Danger of hand-jam
CThe users hands must always be on the arm supports or
in the lap when the Aerolet is in motion.
®

12 Aerolet Manual+Installation Tilting + Vertical - CB-6 - version: 04 - Eng - March 2015
Warning!
Danger of hand-jam.
When the lift is in motion your hand(s) must always be on
the arm supports or in your lap.

13
Aerolet Manual+Installation Tilting + Vertical - CB-6 - version: 04 - Eng - March 2015
Operation instructions
• The Aerolet lift operates by two easy press button controls.
®
These buttons are situated on the inner side on one of the
arm supports.
CThe FRONT BUTTON = UP
(controls the upward movement of the lift)
CThe REAR BUTTON = DOWN
(controls the downward movement of the lift)
CThe Aerolet stops automatically at the level, which set from the
®
beginning.
CThe Aerolet stops with the release of either buttons.
®
CNo continued movement will occur once the lift reaches the preset
stopping point. The Aerolet toilet lifts’ drive system will recalibrate itself
®
each time it reaches its lowest point.
CWhen the Aerolet is installed on a Geberit or Closomat model, the
®
washing and dryer system will operate when the Aerolet reaches its
®
lowest point.
!If both buttons will be pressed, the lift stops. Please release both
buttons for using the lift again.
Battery Back-up (optional)
CWhen there is a power failure the battery will take care for five times
use of the lift, before it is empty.
CWhen the battery is in use the lift operates half the speed and you
must wait five seconds before switching the up- and down buttons.
CThe power failure must be remedied as soon as possible, so that the
lift can function normally and the battery will be charged automatically

14 Aerolet Manual+Installation Tilting + Vertical - CB-6 - version: 04 - Eng - March 2015

15
Aerolet Manual+Installation Tilting + Vertical - CB-6 - version: 04 - Eng - March 2015
Removal and installation of the covers
WARNING
•The user may NEVER remove or install the covers of the
lift.
• This should only be changed by a certified professional.
REMOVAL
•All covers are fastened to the frame with Velcro .
®
•For removal of the covers, the lift must be moved upwards
so that the hinge points D-D make a 30 degree angle with
the perpendicular sides of the lift.
•Remove the two rivits Eout of the cover Aand B.
•Remove cover Afirst, then B and C.
INSTALLATION
•Position the lift as described above for removal of covers.
• Install the cover Cfirst, then Band A.
• The covers will overlap eachother.
! Please be sure that the covers are placed on the
outside of each other prior to operation of the lift.
Damage can occur to the covers if improper installed.

16
Aerolet Manual+Installation Tilting + Vertical - CB-6 - version: 04 - Eng - March 2015

17
Aerolet Manual+Installation Tilting + Vertical - CB-6 - version: 04 - Eng - March 2015
Prepair the Aerolet for a ‘height’ toilet
!Before ordering and installing the Aerolet , the height of
®
the toilet bowl should be measured.
®
•The Aerolet can be adjusted for height toilet with installation
of Kadaptors.
•Carefully turn the lift backwards so that frame Ris off the
ground. Use for instance a few wooden blocks.
•Unscrew the four existing bolts J.
•Remove cover C off of the floor frame Aby seperating the
Velcro .
®
•Install the Kadaptors between the floor frame and drive
units and insert the four mounting bolts Jinto the adaptors
(see detail page 16).
• Slide cover C over floor frame R and fasten the Velcro .
®
• Turn the lift upright and install it over the toilet bowl following
the installation procedure in this manual.

18
Aerolet Manual+Installation Tilting + Vertical - CB-6 - version: 04 - Eng - March 2015

19
Aerolet Manual+Installation Tilting + Vertical - CB-6 - version: 04 - Eng - March 2015
Installing the Aerolet on a toilet bowl
( floor or wall model)
WARNING
• As the Aerolet is installed to the toilet bowl, this bowl
®
form part of the system. Be sure that the bowl is well fixed
to the floor.
• Remove the existing toilet seat from the toilet.
• Remove the covers. (see page 14-15)
• Plug the Aerolet into the GFCI.
®
• Bring the lift aproxx. 15 cm upwards, so that strip Awill be
visable.
!Push fittings Ginto the mounting holes of the toilet bowl.
If necessary, trim the fittings to fit the holes. (see detail G)
• Install the lift over the bowl so that the holes of strip A
corresponds with the toiletbowl holes.
• Insert the two mountings bolts Hinto the mounting strip
and fasten them to the toilet bowl. If necessary, turn the
adjusting screws S” so that the strip Alays flat onto the
bowl.
• Plug the Aerolet into the GFCI and see if the lift is
®
operational.
!Check to see when turning all the screws S, a minimum of
25 mm.distance arises between the toilet bowl edge and
the frame-seat.
• Turn bolts Kand nuts Mand S again.
• Install the covers.
•Adjust the feet under the lift in such a way, that the lift stands
stable
• Adjust the arm supports. (see page 32-33)
• If necessary, adjust the seat rise with the toggle-switch.
(see page 28-29)

20
Aerolet Manual+Installation Tilting + Vertical - CB-6 - version: 04 - Eng - March 2015