
eControlseControls
26072 Merit Circle #110, Laguna Hills, CA 92653
949-916-0945, www.eControlsUSA.com
5-Year Warranty
All products have a 5-year warranty, limited to the repair or
replacement of the product due to defective material or
workmanship.
The Comfort Problem
The Comfort365 Solution
In a typical home the amount of conditioned airflow
required to keep the upstairs sleeping area and the
downstairs living area uniformly comfortable
varies with the seasons and even during the day. This
can result in large temperature variations between the
upstairs and downstairs temperatures.
Traditionally, zoning has been used to solve the problem.
The Comfort365 solves the problem more efficiently and at
about half the cost of zoning. The Comfort365 thermostat
is installed in the downstairs living area and one or two
temperature sensors are installed upstairs in the sleeping
area. The thermostat constantly monitors the upstairs and
downstairs temperatures.
Every two minutes the modulating dampers are adjusted
2% directing more airflow to the upstairs or downstairs to
o
keep the temperatures within 2 F. Bypass is not used with
this system and the equipment operates at its rated
efficiency and airflow. Comfort365 dampers operate from
about 60 to 100% open, never close and do not require the
gaskets used in zoning dampers that can restrict airflow.
The Comfort365 will automatically maintain a uniformly
comfortable home in all seasons without the use of a
zoning system and at about half the cost of a zoning
system.
78o
72o
Living
Area
Sleeping
Area
Uneven conditioning of a home
causes one area to feel too warm
o
73
72o
Living
Area
Sleeping
Area
An evenly conditioned home
is a comfortable home
Only 11 wires and 2 Plug&Play cables to install
compared to 25 for zoning.
Same Thermostat, Wiring Hubs and Dampers can be used
for both RNC and Replacement installations.
Typical savings of 48% in materials compared to zoning.
Typical RNC Installation
Plug&Play dampers reduce wiring errors.
Temperature sensors can be installed in the master
bedroom and bedroom hallway.
Model C365C42 or C365C42WF WiFi thermostat.
Model TS510W for single sensor installations.
Model WH11 for single stage equipment.
Model WH32 for multi-stage equipment.
Model R80CJ-XX Plug&Play modulating dampers.
Model TS520W for two-sensor installations.
Comfort365 Thermostat
Sleeping Area Temperature Sensors
Wiring Hub
Airflow Dampers
R80CJ-XX
Downstairs, Plug&Play
Modulating Damper
C365C42/C365C42WF
Communicating
Thermostat
WH11/WH32
Wiring Hub
Installed at
the equipment
Existing Tstat
Wiring
HVAC
Equipment
TS510W
Upstairs
Wired
Temp Sensor
Living
Tu
Day
Sleeping
Living
Airflow %
COOL
Schedule
AUTO
FANMENU MODE
Cool
Set To
SYSTEM
AM
365
Comfort
5
4
IN
OUT
Model A80MJ
Power Open/Close
or Modulating
Damper Actuator
24VAC, 2.4VA
eControls, Inc.
Made in USA
IN
OUT
Model A80MJ
Power Open/Close
or Modulating
Damper Actuator
24VAC, 2.4VA
eControls, Inc.
Made in USA
2
Model WH11
eControls, Inc.
Wiring Hub
24VAC, 10VA
Made in USA
R80CJ-XX
Upstairs, Plug&Play
Modulating Damper
$
For Comfort365 resources and additional
product offerings such as Whole House Comfort
Controls, please visit our website at
www.eControlsUSA.com.