Ecor-Pro EPD50 RESTO User manual

• DryFan Desiccant Dehumidier for Restoration Professionals, Wi App Enabled.
• DryFan Luftentfeuchter, mit patentiertem Rotor für Restauratoren, Wi App-fähig.
• Déshumidicateur Dryfan avec rotor breveté, pour les professionnels de la restauration,
adapté à l'application Wi-Fi.
• DryFan adsorptie-ontvochtiger voor professionele restauratie, Wi-app geschikt.
USER MANUAL
UK PAGE 2-12
DE GEBRAUCHSANWEISUNG SEITE 13-24
FR MODE D’EMPLOI PAGE 25-36
NL GEBRUIKSAANWIJZING PAG. 37-48
EPD50 RESTO
DRYFAN® TECHNOLOGY
POWERED BY
Made in P.R.C.

EPD50-RESTO Déshumidicateur à adsorption
DryFan pour les professionnels de la restauration
Compatible avec l'application Wi
Conçu pour les processus industriels et les
professionnels de la restauration en cas d'inondation
sur tous les marchés mondiaux. Convient aux
applications où l'excès d'humidité doit être éliminé de
l'air sans produire de condensation. L'utilisation de la
technologie d'adsorption permet d'éliminer
ecacement l'humidité même dans les environnements
à basse température, ce qui constitue l'un de ses
principaux avantages.
Ce déshumidicateur est une solution polyvalente et
performante pour les applications industrielles et de
récupération en cas d'inondation, avec des
caractéristiques avancées et une grande durabilité.
EPD50-RESTO DryFan adsorptie-ontvochtiger voor
professionals in de restauratiesector, Wi app-enabled
Ontworpen voor industriële processen en professionals
in overstromingsherstel op alle wereldmarkten.
Geschikt voor toepassingen waar overtollig vocht uit de
lucht moet worden verwijderd zonder condenswater te
produceren. Het gebruik van adsorptietechnologie
maakt eectieve vochtverwijdering mogelijk, zelfs in
omgevingen met lage temperaturen, een van de grote
voordelen.
Deze ontvochtiger een veelzijdige en capabele
oplossing voor industriële en overstromings-
hersteltoepassingen, met geavanceerde functies en
duurzaamheid.
INTODUCTION
EPD50-RESTO DryFan Desiccant Dehumidier for
Restoration Professionals Wi App, Enabled
Desiccant dehumidier designed for industrial
processes and ood restoration professionals in all
world markets. Well-suited for applications where
excess moisture needs to be removed from the air
without producing condensate water. The use of
desiccant technology allows for eective moisture
removal even in low-temperature environments,
which is a notable advantage.
Overall, this desiccant dehumidier is versatile and
capable solution for industrial and ood
restoration applications, oering advanced
features and durability.
EPD50-RESTO DryFan
Adsorptionsluftentfeuchter für Sanierungspros
Wi-App-fähig
Entwickelt für industrielle Prozesse und
Hochwassersanierer in allen globalen Märkten.
Geeignet für Anwendungen, bei denen
überschüssige Feuchtigkeit aus der Luft entfernt
werden muss, ohne dass Kondensation entsteht.
Der Einsatz der Adsorptionstechnologie
ermöglicht eine eektive Feuchtigkeitsentfernung
auch in Umgebungen mit niedrigen Temperaturen,
einer seiner Hauptvorteile.
Dieser Luftentfeuchter ist eine vielseitige und
leistungsfähige Lösung für Industrie- und
Hochwassersanierungsanwendungen, mit
fortschrittlichen Funktionen und Langlebigkeit.
2
UK
DE
FR
NL

OUT THE BOX
- Eyes for shoulder strap
• EPD50 RESTO complete with lter holder
and lter, fuse 230V 10 A
• 5 meter D-UK plug with fuse 230V 13A
• 5 meter D-Shuko plug (EU)
• 1 meter ex duct dia. 40 mm to t
• Plastic clip
• Shoulder strap
• EPHUM-I-MAX humidistat
for for humidity control (% R.H.)
• 1 m “Curley” of controller cord, RJ11 connectors
Optional Additional Parts Available
• Flanges 125 mm Front & Back - EPFLAN125R
• 90 mm input and outlet ange - EPFLAN90R
• Replacement Filter pack of three - EPFILPACK
UK
3
EPHUM-I-MAX
• Follow the instructions via the QR codes • EPHUM-I-MAX
humidistat for for
humidity control (%R.H.)
• Loosen middle screw
to t the correct plug.
Screw must be re-
fasten securely.
• 1 meter “Curley” of
controller cord, RJ11
connectors
EPD50 RESTO, Stainless Steel Housing,
with at lter holder and lter

For safety reasons, read this information carefully before operating. Persons who are not familiar
with this type of product must not use it. Keep the manual in a safe place for future reference.
SAFETY (1)|
The dehumidifier is safe, however, as with other electrical appliance, use it with care.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning the use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
The installation must be in accordance with the regulations
of the country where the unit is used.
The unit is designated for indoor operation.
This appliance must be earthed and should only be connected
to an earthed 230V – 50 Hz mains supply.
For industrial processes and ood recovery, also to prevent rust, wood rot, bacteria and fungi.
For applications where excess moisture needs to be removed from the air.
+
4

• Do not clean the dehumidifier by spraying it or immersing it in water.
• Do not insert any object into the opening of the dehumidifier.
• Disconnect from the mains before cleaning the unit or any of its components.
• Never connect to an electrical outlet using an extension cord.
If an outlet is not available, one should be installed by a licensed electrician.
• Place the dehumidifier in location appropriate to the appliance IP-rating (see technical data).
• Any service other than regular cleaning, setting fan mode or filter replacement should be performed by an
authorised service representative. Failure to do so could result in a loss of warranty. Your dehumidifier is
supplied with an electrical cable (15 ft) and an earthed plug. Should it be necessary to replace this plug at
any time, you must use an earthed electrical plug.
Warning! Never operate this appliance if it has a damaged cord or plug.
If the supply cord is damaged an approved service representative or a similar qualified person
must replace it in order to avoid any hazards.
There should be direct access to the electrical plug after connecting the power!
Do not use your dehumidifier under the following conditions:
• If the power cable is damaged
• Where the power cable may be easily damaged
• Close to heat source
• Where small children may be left unattended
• Where there is a risk of liquids falling on the unit
• Where it may be damaged by chemicals
This product is not made for DIY repair.
SAFETY (2)|
5

PATENTED DESICCANT ROTOR
The Desiccant Rotor is the heart of the DryFan® system. It is an array of
especially absorbent membranes – patent protected – arranged as a series
of corrugations (as shown in the cut-away image) to give a vast surface
area that was developed over many years, making it an extremely efficient
moisture collector.
PATENTED REGEN HEATER
A patented ceramic PTC Regen Heater. (PTC Positive Temperature
Coefficient) is self regulating so never to overheat. However, as triple safety
we include a separate overheat smart sensor in the dehumidifier.
The patented technology is both safe and energy efficient and can never
overheat to hazardous temperatures, even if vents become accidentally
blocked.
• wet air
exhaust
• dry ltered air out
• damp air in
HOW OUR UNIQUE TECHNOLOGY WORKS |
+
• damp air in
• wet air
exhaust

9
UK
External Positioning (Outlet Duct Fitted Only):
When positioning the unit outside the room, connect
ducting to the outlet to direct the dry air-stream into
the room to be dried. Optionally, the inlet may also be
ducted to the room to give a re-circulation eect. In
this case however, because the unit uses a portion for
the inlet air for regeneration. Provision must be made
in the inlet duct to draw air also from outside the room.
POSITIONING (1)
+
Ø 40 mm
207 mm 207 mm
328 mm
207 mm
197 mm197 mm
7
POSITIONING
The models have been designed for indoor use however,
they can be placed inside or outside the room to be
dried.
Internal Positioning:
When positioning the unit inside the room, place it
centrally, ensuring inlet and outlet ducts are clear of
obstruction. If required, ducts can be connected to the
outlet and/or inlet (where fitted) to direct the drying
to specific areas. The ‘Wet Air Out’ MUST be ducted
outside the room.
damp air in
dry ltered air out
wet air exhaust drain

POSITIONING (2)
Note:
External ductwork will reduce restrict airow and therefore the amount of water the dehumidifiers will
extract. To maximize airow and water extraction always keep any ducting to minimum.
Maximum lengths in meters of any ducts are outlined in the table.
Flanges are available for mounting
external ducts.
There is a choice of anges for
90 mm or 125 mm ducts.
8
Maximum wet air out
duct length (m)
Maximum dry ltered air
out duct length (m)
together with a maximum length of 3 m
Maximum damp air in
duct length (m)
3.0 1.0 3.0
220-240V / 50Hz
Outside/Drain
90 mm or
125 mm
90 mm or
125 mm
40 mm

1
2
3
4
5
6
Fuse under socket
230V 10A.
UK
All controls are located at the front of the unit, next to the air intake.
1. Continuous Fan; "white spot pressed" is on.
2. Dust cover with an RJ11 connector behind it for the remote control
3. LED light. Led lights up showing status
4. On of switch of the unit. "I" is on, "O" is o.
5. Socket for 230V. Protective cap also prevents the cord
from slipping loose.
6. Holder for fuse 230V - 10 A
Remove the plug from the socket before checking fuses. If the
appliance does not work, check the appliance fuse 230V-10A and/or
the plug fuse (UK only) 230V-13A.
FIXING
The dehumidier can be mounted in any position, even upside down.
Skewed, tilted or upside down. No spirit level is needed (therefore ideal
for use in ships and boats). Turn out the feet at the bottom of the unit and
you will see the xing points. Secure all 4 feet with screws or bolts (not
supplied) to the oor, wall or ceiling.
OPERATION
Connect the unit to the correct mains voltage and lines. Connect the
remote control (HUMIDISTAT-I-MAX and download the app. Follow the
instructions. Set the dehumidication level to the setting desirable for the
room, which is to be dried.
Attention! As an added safety feature, if this dehumidifier overheats
internally, the internal safety fuse will stop the unit from working. To reset
this fuse, unplug the dehumidifier from the power source and then plug it
in again. Check filters are clean and ducting allows adequate air flow to
operate.
Attention! The unit will run 5 minutes after turned o for internal cooling!
OPERATION (1)|
+
9
Fuse in plug (UK only)
230V 13A.

OPERATIO
STAND ALONE
Turn o the remote control switch. Press the black area of the switch.
The unit will now operate continuously 24/7 without a remote control at
maximum dehumidication.
REMOTE OPERATION
For remote operation it is necessary to connect the humidistat controller
(provided) via the cord and RJ11 connectors. Ensure the “Remote Humidistat”
switch is set to on (press white dot). The dehumidifier will now be controlled by
the remote humidistat that is using low power and only 12V. Download the app
via the QR code (page 3) and follow the instructions in the app.
NOTE: A low setting of say 10% means the room is regulated to a very dry level
while a setting of say 90% the room will be maintained at a relatively humid
level. The right level for the room may vary with weather, temperature and
occupation conditions over time.
CLEANING
Disconnect from the mains before cleaning or servicing the unit or any of its
components.
Wipe regularly clean with a moist cloth (a soft, damp cloth) and a
mild household detergent, Never use chemicals, petrol, aggressive detergents or
other cleansing solutions
.
AIR FILTER
The dehumidifier has an inlet air filter. This should be checked periodically and
if necessary cleaned. It can be cleaned with a vacuum cleaner or hand
washed in mild detergent only. Replacement filters are available from your
supplier. ATTENTION: Do not run the unit without a filter fitted
as dust will impair the performance of the Rotor.
11
2
3
10
Changing Air Filter
1) Slide down both black lips at
the same time.
2) Fold the lter housing forward.
3) Take out the lter and exchange
it for a clean lter and close the
lter housing again.
OPERATION (2)

UK
TECHNICAL DATA|
OPTIONAL PARTS|
11
PART NUMBER:
• 125 mm input & output ange E FLAN125R
• 90 mm input and outlet ange E FLAN90R
• 10 m humidistat extension cord E HUMEXT10M
• Replacement Filter pack of three E FIL ACK FOUR
Extraction @ 350C / 90% RH
Typical extraction @ 270C / 60% RH
Air Flow ( rocess Air in)
Air Flow (Exhaust Air Out)
Air Flow (Fresh Dry Air Out)
Mains (Single hase)
Current @ 270C / 60% RH
ower @ 270C / 60% RH
Temperature Range
Dimensions LxDxH
Net Weight
Noise Level
EPD50-RESTO
13 litres/day
11 litres/day
210 m/hr
35 m/hr
180 m/hr
230 V/50 Hz
2.4 A
0.55 kW
-20 C - +40 C
328 x 197 x 207 mm
6.1 kg
52 dB
REVV1 Subject to Change.
POWERED BY
Made in P.R.C.
• 125 mm input & output ange
• 90 mm input & output ange

Subject to modications.
The manufacturer / supplier is not liable for damages and
consequences of incorrect connections.
Änderungen vorbehalten.
Der Hersteller/Lieferant haftet nicht für Schäden und ihre Folgen
bei nicht korrekten Anschlüssen.
Sous réserve de modications.
Le fabricant / fournisseur rejette toute responsabilité pour tout
dommage ou toute conséquence de branchements incorrects.
Wijzigingen voorbehouden.
De fabrikant / leverancier is niet aansprakelijk voor schade en
gevolgen van onjuiste aansluitingen.
End of the period of use
Waste electrical equipment
must not be disposed of in
normal household waste.
Take this product to your
local recycling centre for
proper disposal.
Einde van de gebruiksperiode
Afgedankte elektrische
apparatuur mag niet bij het
normale huishoudelijk afval.
Breng dit product naar uw
plaatselijke recyclingcentrum
voor correcte verwijdering.
Ende der Nutzungsdauer
Elektroaltgeräte dürfen nicht im
normalen Hausmüll entsorgt.
Hausmüll entsorgt werden.
Bringen Sie dieses Produkt zur
ordnungsgemäßen Entsorgung
zu Ihrem örtlichen Recycling-
Center.
Fin de la période d'utilisation
Les déchets d'équipements
électriques ne doivent pas être
jetés avec les déchets dans les
ordures ménagères. Remettez
ce produit à votre centre de
recyclage local pour qu'il soit
éliminé de manière appropriée.
www.ecor-pro.com • [e-mail] Made in P.R.C.
12