Edco Vortex 300 Datasheet
E-VAC300-PL-0218
PARTS LIST MANUAL
VAC-300
300 CFM GASOLINE HEPA MAX VACUUM
PART # MODEL # POWER OPTION
ED33725HK GV10 HONDA 10 HP GASOLINE ENGINE
REVISED STARTING
SERIAL #18020182
www.discount-equipment.com
Discount-Equipment.com
Discount-Equipment.com is your online resource for commercial and industrial
quality parts and equipment sales.
Locations:
Florida (West Palm Beach): 561-964-4949
Outside Florida TOLL FREE: 877-690-3101
Need parts? Check out our website at www.discount-equipment.com
Can’t find what you need?
Click on this link: http://www.discount-equipment.com/category/5443-parts/ and fill out
the request form.
Please have the machine model and serial number available in order to help us get
you the correct parts. One of our experienced staff members will get back to you with
a quote for the right part that your machine needs.
We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mayco, Toro/Stone,
Diamond Products, Magnum, Airman, Mustang, Power Blanket, Nifty Lift, Atlas Copco,
Chicago Pneumatic, Allmand Brothers, Essick, Miller Spreader, Skyjack, Lull, Skytrak,
Tsurumi, Husquvarna/Target, Whiteman-Concrete/Mortar, Stow-Concrete/Mortar, Baldor,
Wacker, Sakai, Snorkel, Upright, Mi-T-M, Sullair, Neal, Basic, Dynapac, MBW, Weber,
Bartell, Bennar Newman, Haulotte, Ditch Runner, Blaw-Knox, Himoinsa, Best, Buddy,
Crown, Edco, Wyco, Bomag, Laymor, Terremite, Barreto, EZ Trench, Takeuchi, Basic, Bil-
Jax, Curtis, Gehl, Heli, Honda, ICS/PowerGrit, Puckett, Waldon, ASV, IHI, Partner, Imer,
Clipper, MMD, Koshin, Rice, Gorman Rupp, CH&E, Cat Pumps, Comet, General Pump,
Giant,AMida, Coleman, NAC, Gradall, Square Shooter, Kent, Stanley, Tamco, Toku, Hatz,
Kohler, Robin, Wisconsin, Northrock, Oztec, Toker TK, Rol-Air, Small Line, Wanco, Yanmar
Discount-Equipment.com
E-VAC300-PL-0218
Printed in USA
©2018 JWA
Page 2
READ AND UNDERSTAND THE OPERATORS INSTRUCTION MANUAL THOROUGHLY
BEFORE ATTEMPTING TO OPERATE THIS EQUIPMENT.
Death or serious injury could occur if this machine is used improperly.
Extreme care must be taken when operating electric
models with water present: Ensure power cord is prop-
erly grounded, is attached to a Ground-Fault-Interrupter
(GFI) outlet, and is undamaged.
•Check all electrical cables - be sure connections are tight and
cable is continuous and in good condition. Be sure cable is
correctly rated for both the operating current and voltage of
this equipment.
•Improper connection of the equipment-grounding conductor can
result in a risk of electric shock. Check with qualied electri-
cian or service person if there is any doubt as to whether the
outlet is properly grounded. Adhere to all local codes and
ordinances.
•NOTE: In the event of a malfunction or breakdown, grounding
provides a path of least resistance for the electric current to
dissipate. The motor is equipped with a grounded plug and
must be connected to an outlet that is properly installed and
properly grounded. DO NOT modify the plug provided on the
motor. If the plug does not t the outlet have a qualied electri-
cian install the proper receptacle.
•Switch motor OFF before disconnecting power.
•Engine exhaust from this product contains
chemicals known to the State of California to
cause cancer, birth defects or other reproduc-
tive harm.
•Gasoline is extremely ammable and poisonous.
It should only be dispensed in well ventilated areas,
and with a cool engine.
•Small gasoline engines produce high concentra-
tions of carbon monoxide (CO) example: a 5 HP 4 cycle
engine operation in an enclosed 100,000 cu. ft. area with
only one change of air per hour is capable of providing
deadly concentrations of CO in less than fteen minutes.
Five changes of air in the same area will produce noxious
fumes in less than 30 minutes. Gasoline or propane pow-
ered equipment should not be used in enclosed or partially
enclosed areas. Symptoms of CO poisoning include, head-
ache, nausea, weakness, dizziness, visual problems and
loss of consciousness. If symptoms occur - get into fresh
air and seek medical attention immediately.
SAFETY
MESSAGES
SAFETY MESSAGES
Indicates an imminent hazard which, if not
avoided, will result in death or serious injury.
Indicates an imminent hazard which, if not
avoided, can result in death or serious injury.
Indicates hazards which, if not avoided, could
result in serious injury and or damage to the
equipment.
•Safety Instructions are proceeded by a graphic alert symbol
of DANGER, WARNING, or CAUTION.
ELECTRICAL POWERED EQUIPMENT
GASOLINE/PROPANE POWERED EQUIPMENT
•Equipment should only be operated by trained personnel in
good physical condition and mental health (not fatigued). The
operator and maintenance personnel must be physically able
to handle the bulk weight and power of this equipment.
•This is a one person tool. Maintain a safe operating distance
to other personnel. It is the operators’ responsibility to keep
other people (workers, pedestrians, bystanders, etc.) away
during operation. Block off the work area in all directions with
roping, safety netting, etc. for a safe distance. Failure to do so
may result in others being injured by ying debris or exposing
them to harmful dust and noise.
•This equipment is intended for commercial use only.
•For the operator’s safety and the safety of others, always keep
all guards in place during operation.
•Never let equipment run unattended.
•Personal Protection Equipment and proper safety attire must
be worn when operating this machinery. The operator must
wear approved safety equipment appropriate for the job such
as hard hat and safety shoes when conditions require. Hear-
ing protection MUST be used (operational noise levels of this
equipment may exceed 85db). Eye protection MUST be worn
at all times.
Keep body parts and loose clothing away from moving
parts. Failure to do so could result in dismemberment
or death.
•Do not modify the machine.
•Stop motor/engine when adjusting or servicing this equipment.
Maintain a safe operating distance from ammable
materials. Sparks from the cutting-action of this machine
can ignite ammable materials or vapors.
GENERAL INSTRUCTIONS
DUST WARNING
Some dust created by power sanding, sawing,
grinding, drilling, and other construction activi-
ties contains chemicals known to cause cancer,
birth defects, or other reproductive harm. Some
examples of these chemicals are:
•Lead from lead-based paints, and
•Crystalline silica from bricks and concrete and other
masonry products.
Your risk of exposure to these chemicals varies depending
on how often you do this type of work. To reduce your risk:
work in a well ventilated area, use a dust control system, such
as an industrial-style vacuum, and wear approved personal
safety equipment, such as a dust/particle respirator designed
to lter out microscopic particles.
•Do not disconnect power by pulling cord. To disconnect, grasp
the plug, not the cord.
•Unplug power cord at the machine when not in use and before
servicing.
Discount-Equipment.com
E-VAC300-PL-0218
Printed in USA
JWA ©2018
Page 3
PARTS LIST MANUAL
VAC-300
300 CFM GASOLINE HEPA MAX VACUUM
Section Page Number
Safety Messages and General Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
How To Order Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Illustration 1: Engine Deck Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 5
Illustration 2: HEPA Max Filter Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 7
Illustration 3: 2.6M Filter & Manual Shaker Assembly . . . . . . . . . . . . . . . . . . . . . . . 8, 9
Illustration 4: Base Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11
Illustration 5: Dustpan Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Illustration 6: Dustpan Lever Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Illustration 7: 70mm Inlet Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Illustration 8: Hose and Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Decal Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
This page was left blank intentionally . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Limited Equipment Warranty of Sale - Terms & Conditions . . . . . . . . . . . . . . . . . . . 19
STOP...Before Using This Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
HOW TO ORDER REPLACEMENT PARTS
To insure product safety and reliability, always use
genuine EDCO replacement parts when making
repairs to the equipment.
When calling for parts, specify the MODEL and
SERIAL number of the machine, which can be found
on the NAME PLATE. Keep that information in the
space provided. In addition to this information, give
part number, description, and quantity as listed on
the parts list to your parts representative.
Please note: Due to improvements and changes
in the equipment, the illustrations shown may be
dierent than the actual machine.
FILL IN INFORMATION BELOW
Date of Purchase ______________________________
Model # _____________________________________
Serial # ______________________________________
SKU # ______________________________________
TABLE OF CONTENTS
Discount-Equipment.com
E-VAC300-PL-0218
Printed in USA
©2018 JWA
Page 4
ILLUSTRATION 1: ENGINE DECK ASSEMBLY
1
23 25 28
Discount-Equipment.com
E-VAC300-PL-0218
Printed in USA
JWA ©2018
Page 5
PARTS LISTING - ILLUSTRATION 1: ENGINE DECK ASSEMBLY
ITEM # PART # DESCRIPTION QTY.
1 ED90228005 ENGINE DECK, GV10, DS1 BLACK 1
2 ED2501309 ENGINE, HONDA 10HP GASOLINE 1
3 ED22221 TURBINE, NTB 5S/12/48,4.0 KW 1
4 ED32856 EXHAUST DEFLECTOR, TURBINE 1
5 ED33057 PULLEY, 48MM, 10 GROOVE, POLY-V 1
6 ED35014 BELT, 330J, 10 GROOVE, POLY-V 1
7 ED330501 BUSHING, P1 X 1-INCH 1
8 ED33052US SHEAVE, 125MM, 10 GROOVE, POLY V 1
9 ED1002201A3 PRESSURE RELIEF VALVE, PERFORATED COVER 1
10 ED2501309T THROTTLE CABLE FOR GAS ENGINE 1
11 ED31376002 GASKET, NEOPRENE, .188”, 5.4FT LG 1
12 ED2501309E HOUR METER, DS1 GAS VAC 1
13 ED2501309J INSTRUCTION BRACKET 2
14 ED2501309L SPACER PVC, GAS VAC, 2-1/4”OD X 1-1/2”ID 1
15 ED2501309Z DRAINZIT, 20MM CONNECTION, HONDA ENGINE 1
16 ED2501309D ENGINE EXHAUST DEFLECTOR 1
17 ED25000 WASHER, EXT. STAR 1/4” 4
18 ED20031 WASHER, FENDER 1/4 X 1-1/4 3
19 ED32827 NUT, HEX, LH M12 X 1.75 1
20 ED328685 SCREW, SLOT, CH, M5 X 16 6
21 ED25067 WASHER, FLAT, M6, DIN 125, ZINC 6
22 ED34817 SCREW, SOC BH, ULS, M6 X 20 4
23 ED312084 BOLT, HEX 5/16-24 X 1-1/4 2
24 ED31211 BOLT, HEX, 5/16-18 X 2 ZINC 2
25 ED31206 WASHER, LOCK, 5/16”, ZINC 2
26 ED31202 NUT, LOCK 5/16-18 2
27 ED25061 WASHER, FLAT, M8, DIN125, ZINC 2
28 ED20032 WASHER, FENDER, 5/16 x 1-1/2, ZINC 4
29 ED34817A M6 BLIND PEM 4
30 ED3481701 SCREW, BH SOC, FLANGED, M6 X 25 4
31 ED34876 NUT, LOCK M6 ZINC 7
32 ED22120 PLUG, 8MM, BLACK 2
Discount-Equipment.com
E-VAC300-PL-0218
Printed in USA
©2018 JWA
Page 6
ILLUSTRATION 2: HEPA MAX FILTER ASSEMBLY
PART # ED35193
Discount-Equipment.com
E-VAC300-PL-0218
Printed in USA
JWA ©2018
Page 7
PARTS LISTING - ILLUSTRATION 2: HEPA MAX FILTER ASSEMBLY
ITEM # PART # DESCRIPTION QTY.
1 ED32835001 LRG. HOUSING SPACER, D1-WS, HEPA, BLACK 1
2 ED34947 HEPA ADAPTER PLATE, DS1 1
3 ED35211 HEPA FILTER 40 SQ FOOT, WS, DS1 1
4 ED34949 HEPA HOLD DOWN BRACKET, WS 4
5 ED25143 MINIHELIC, WITH MTG BRKT 10”WC 1
6 ED25149 HOSE BARB, 1/8 X 1/8, STRAIGHT 1
7 ED31376002 GASKET, NEOPRENE, .188”, 5.4FT LG 1
8 ED34817 SCREW, SOC BH, ULS, M6 X 20 5
9 ED32903 BOLT, HEX, M6 X 20 ZINC 4
10 ED20039 WASHER, SPLIT LOCK, M6 DIN 7980 4
11 ED3481701 SCREW, BH SOC, FLANGED, M6 X 25 2
12 ED25000 WASHER, EXT. STAR 1/4” 2
13 ED34817A M6 BLIND PEM 6
14 ED34800 HOSE, CLEAR, 1/8” INSTRUMENT 1FT
15 ED34998 GROUND CONNECTION, FOR BOLT 2
16 ED34819 WASHER, FENDER, M6 1
17 ED34876 NUT, LOCK M6 ZINC 1
18 ED31713 TERMINAL, 16/14 GA., PUSHON BLUE NYLON 2
19 ED34993 GROUND CABLE, 16 GAUGE, GREEN 8IN
Discount-Equipment.com
E-VAC300-PL-0218
Printed in USA
©2018 JWA
Page 8
$
%
'(7$,/$
6&$/(
'(7$,/%
6&$/(
ILLUSTRATION 3:
2.6M FILTER & MANUAL SHAKER ASSEMBLY
A
'(7$,/$
6&$/(
'(7$,/%
6&$/(
DETAIL A
DETAIL B
B
Discount-Equipment.com
E-VAC300-PL-0218
Printed in USA
JWA ©2018
Page 9
PARTS LISTING - ILLUSTRATION 3:
2.6M FILTER & MANUAL SHAKER ASSEMBLY
ITEM # PART # DESCRIPTION QTY.
1 ED32834003 HOUSING SPACER, D1, SMALL, BLACK,
NO HBAR BRKT HOLES
1
2 ED32834004 HOUSING SPACER,D1,PORT,SMALL,BLACK 1
3 ED32835002 HOUSING SPACER, D1, LRG, BLACK,
HANDLE SUPPORT HOLES
1
4 ED30091 FILTER, 28 SQ/FT, 2.6M 1
5 ED34807 FILTER SHAKER INSERT, 2.6M 1
6 ED34804 SLIDE BAR, FILTER MANUAL SHAKER 1
7 ED30095 FILTER BAR SUPPORT, DS1/W2 1
8 ED22565 SHAKER BAR W/ SWIVEL HANDLE 1
9 ED34806 SHAKER ROD MOUNTING SUPPORT 2
10 ED20040 NUT, HEX M8-8, DIN 934, ZINC 4
11 ED20039 WASHER, SPLIT LOCK, M6 DIN 7980 4
12 ED34815 SCREW, SOC FH CAP M6 X 30 4
13 ED34871 PLASTIC PLUG 4.5/13 4
14 ED34805 HOSE, 3/4 ID CLEAR 2
15 ED34879 SPRING CLIP, 6 X 12, CLEVIS YOKE 1
16 ED25047 CLEVIS, DIN 71752G, STEEL 1
17 ED34802 SLIDE ASSEMBLY, W/ HOOK 2
18 ED34998 GROUND CONNECTION, FOR BOLT 2
19 ED20050 WASHER, SPLIT LOCK, M8 2
20 ED25038 BOLT, HEX, M8 X 20, DIN 933, ZINC 2
21 ED20045 NUT, SQUARE, M8, ZINC 2
22 ED30091F FILTER INSERT, 2.6M 8
23 ED3481701 SCREW, BH SOC, FLANGED, M6 X 25 10
24 ED25000 WASHER, EXT. STAR 1/4” 6
25 ED34817A M6 BLIND PEM 6
26 ED34869 GROUND, DEFLECTOR, 2.6 FILTER 1
27 ED34819 WASHER, FENDER, M6 4
28 ED34876 NUT, LOCK M6 ZINC 7
29 ED3137766 GASKET, NITRILE SPONGE FOR D1 2
30 ED31376002 GASKET, NEOPRENE, .188”, 5.4FT LG 5.4FT
31 ED20044 NUT, HEX M8-8, DIN 934, ZINC 1
32 ED34817 SCREW, SOC BH, ULS, M6 X 20 2
Discount-Equipment.com
E-VAC300-PL-0218
Printed in USA
©2018 JWA
Page 10
.,7
.,7
.,7
%27+6,'(6
'8673$1*$6.(7
ILLUSTRATION 4: BASE ASSEMBLY
DUSTPAN GASKET
#ED2509865
ED3487KIT
ED3487KIT
ED3487KIT
7
Discount-Equipment.com
E-VAC300-PL-0218
Printed in USA
JWA ©2018
Page 11
PARTS LISTING - ILLUSTRATION 4: BASE ASSEMBLY
ITEM # PART # DESCRIPTION QTY.
1 ED302120A CASTER FRAME HD 1
2 ED30210C CASTER, 6IN, SWIVEL, NO BRK, EX 2
3 ED37506 NUT, LOCK 3/8-16 20
4 ED31205 FLAT WASHER, 5/16”, ZINC 16
5 ED30213C CASTER 6” RIGID W/ BRAKE 2
6 ED32836004 LOWER HOUSING BASE, D1, BLK 1
7 ED30007A INLET KIT, 70MM, ALUMINUM
(REFER TO ILLUS. 7 FOR BREAKDOWN)
1
8 ED200515 HEX BOLT 3/8-16 X 4-1/2 2
9 ED37507 FLAT WASHER, 3/8” 8
10 ED2006601 SPACER 2
11 ED200512 HEX BOLT 3/8-16 X 3-1/2 2
12 ED20010A DUST PAN LEVER ASSY., DS1
(REFER TO ILLUS. 6 FOR BREAKDOWN)
1
13 ED25080 PUSH HANDLE 1
14 ED20070 GASKET, DUST PAN/LOWER HOUSING 1
15 ED34810 HEX BOLT M8 X 50 2
16 ED200190 WASHER, M8 BLACK NYLON 5
17 ED20050 WASHER, SPLIT LOCK M8 2
18 ED25061 WASHER, FLAT, M8, DIN125, ZINC 2
19 ED32927 NUT, ACORN M8 2
20 ED32837002
ED2509865
D1 DUSTPAN ASM, EX CASTERS
DUST PAN REPLACEMENT GASKET
(REFER TO ILLUS. 5 FOR BREAKDOWN)
1
1
21 ED32039R HANDLE SUPPORT, PLASTIC 2
22 ED25038 BOLT, HEX, M8 X 20, DIN 933, ZINC 2
23 ED25037 WASHER EXT STAR M8 ZINC 2
24 ED25060 KNOB, BLACK, 8MM 2
25 ED3487KIT WIRE KIT, HD CASTER FRAME 1
Discount-Equipment.com
E-VAC300-PL-0218
Printed in USA
©2018 JWA
Page 12
ILLUSTRATION 5: DUSTPAN ASSEMBLY
ITEM # PART # DESCRIPTION QTY.
1 ED3283701 DUST PAN, 35 LITER, BLACK 1
2 ED30199 CASTER, 3IN X 1.25IN, GREY, CONDUCTIVE 4
3 EDHW4076A02 WASHER 3/8” D-SHAPED 4
4 ED37501 WASHER,SPLIT LOCK,3/8”, ZINC 4
5 ED37502 HEX NUT, 3/8-16 4
6 ED21658-28 HANDLE, BLACK, 2X6MM, CUT AT A 28 1
7 ED21464 SCREW, SOC BH, FLNGD, M6 X 30 2
8 ED34819 WASHER, FENDER, M6 2
9 ED34876 NUT, LOCK M6 ZINC 2
10 ED2509865 DUST PAN REPLACEMENT GASKET 1
Discount-Equipment.com
E-VAC300-PL-0218
Printed in USA
JWA ©2018
Page 13
*2(6212876,'(2)+286,1*
*2(6212876,'(2)+286,1*
ILLUSTRATION 6: DUSTPAN LEVER ASSEMBLY
ITEM # PART # DESCRIPTION QTY.
1 ED20010 FOOT LEVER, D1 1
2 ED34812 SPACER FOR FOOT LEVER 2
3 ED20044 NUT, HEX M8-8, DIN 934, ZINC 4
4 ED34882 WASHER, FLAT/THIN M8 ZINC 6
5 ED25061 WASHER, FLAT, M8, DIN125, ZINC 6
6 ED30029 NUT, LOCK, M8, ZINC 4
7 ED34921 PIN, D6X15MM 2
8 ED20027 FLAT STEEL PIVOT 2
9 ED25067 WASHER, FLAT, M6, DIN 125, ZINC 4
10 ED34923 C SPRING CLIP, ZINC 4
11 ED34922 PIN, D6 X 19MM 2
12 ED34852* DUST PAN TENSION LEVER (*USE ED34852A FOR KIT) 2
13 ED34853* DUST PAN LEVER BEARING (*USE ED34852A FOR KIT) 2
14 ED34811 BOLT, HEX M8 X 55, DIN 933, ZINC 2
15 ED25037 WASHER, EXT. STAR M8 ZINC 2
16 ED25053 BOLT, CARRAIGE M8 X 35 2
Discount-Equipment.com
E-VAC300-PL-0218
Printed in USA
©2018 JWA
Page 14
ILLUSTRATION 7: 70mm INLET ASSEMBLY
ITEM # PART # DESCRIPTION QTY.
1 ED30007 INLET, 70MM, ALUMINUM 1
2 ED34821 GASKET, 70MM INLET 1
3 ED32958 DEFLECTOR, 70MM., ALU., DS1/WS 1
4 ED328661 SCREW, SOC HD CAP M5 X 25 BLKOX 3
5 ED32863 SCREW, SOC HD CAP M5 X 20 BLKOX 1
6 ED32867 WASHER, EXT. STAR, M5, ZINC 1
7 ED328669 WASHER, FLAT, M5, SS 3
5()*5281':,5(72),/7(5
)250),/7(5
)250),/7(5
PART # ED34869
Discount-Equipment.com
E-VAC300-PL-0218
Printed in USA
JWA ©2018
Page 15
ITEM # PART # DESCRIPTION QTY.
1 ED701225
ED7013B
ED501425
ED5014B
STANDARD HOSE, 3” X 25’, CRUSH-PROOF W/ CUFFS
REPLACEMENT 3” HOSE CUFF ONLY
*OPTIONAL HOSE, 2” X 25’, CRUSH-PROOF (NOT SHOWN)
REPLACEMENT 2” HOSE CUFF ONLY
1
2
1
2
2 ED7018-BL STANDARD HOSE CONNECTOR 3”BL TO 3” HOSE 1
3 ED5220-BL OPTIONAL HOSE CONNECTOR 2”BL TO 2” HOSE 1
4 ED30009-BL OPTIONAL ADAPTER, 3” INLET TO 2” INLET 1
*NOTE: OPTIONAL 2” HOSE REQUIRES ITEMS 3 AND 4.
ILLUSTRATION 8: HOSE AND CONNECTOR
1
2
34
Discount-Equipment.com
E-VAC300-PL-0218
Printed in USA
©2018 JWA
Page 16
DECAL SHEET
Discount-Equipment.com
Discount-Equipment.com is your online resource for commercial and industrial
quality parts and equipment sales.
Locations:
Florida (West Palm Beach): 561-964-4949
Outside Florida TOLL FREE: 877-690-3101
Need parts? Check out our website at www.discount-equipment.com
Can’t find what you need?
Click on this link: http://www.discount-equipment.com/category/5443-parts/ and fill out
the request form.
Please have the machine model and serial number available in order to help us get
you the correct parts. One of our experienced staff members will get back to you with
a quote for the right part that your machine needs.
We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mayco, Toro/Stone,
Diamond Products, Magnum, Airman, Mustang, Power Blanket, Nifty Lift, Atlas Copco,
Chicago Pneumatic, Allmand Brothers, Essick, Miller Spreader, Skyjack, Lull, Skytrak,
Tsurumi, Husquvarna/Target, Whiteman-Concrete/Mortar, Stow-Concrete/Mortar, Baldor,
Wacker, Sakai, Snorkel, Upright, Mi-T-M, Sullair, Neal, Basic, Dynapac, MBW, Weber,
Bartell, Bennar Newman, Haulotte, Ditch Runner, Blaw-Knox, Himoinsa, Best, Buddy,
Crown, Edco, Wyco, Bomag, Laymor, Terremite, Barreto, EZ Trench, Takeuchi, Basic, Bil-
Jax, Curtis, Gehl, Heli, Honda, ICS/PowerGrit, Puckett, Waldon, ASV, IHI, Partner, Imer,
Clipper, MMD, Koshin, Rice, Gorman Rupp, CH&E, Cat Pumps, Comet, General Pump,
Giant,AMida, Coleman, NAC, Gradall, Square Shooter, Kent, Stanley, Tamco, Toku, Hatz,
Kohler, Robin, Wisconsin, Northrock, Oztec, Toker TK, Rol-Air, Small Line, Wanco, Yanmar
Discount-Equipment.com
This manual suits for next models
1
Table of contents
Other Edco Vacuum Cleaner manuals
Edco
Edco SLURRY PRO VACUUM Assembly instructions
Edco
Edco GVE 370 User manual
Edco
Edco VAC-290 Assembly instructions
Edco
Edco Kit AH2 User manual
Edco
Edco Numatic CVC370 User manual
Edco
Edco WV 570 User manual
Edco
Edco VORTEX-300 Assembly instructions
Edco
Edco Numatic HZC 390S-2 User manual
Edco
Edco VAC-100 User manual
Edco
Edco VAC-290 Assembly instructions
