EDIFIER Xemal X3s User manual

X3s
True Wireless Stereo Earbuds
For user safety and compliances, also for the optimum performance,
please carefully read safety instructions and use the product in accordance with them.

Product description and accessories
Note:
• There are different size of ear tips attached in the package, please select the suitable ones to wear.
• Images are for illustrative purposes only and may differ from the actual product.
Touch button
Red/blue indicator
Charging case Type-C charging cable Ear tips

Operating instructions
Red indicator
1. Charge
Charge the earbuds
• You may hear a warning tone with the red light flashing
when the earbuds are at low battery level, please place the
earbuds in the charging case for charging.
• Red light of the earbuds steady lit = charging
Red light of the earbuds off = fully charged
Charge the charging case
• Please connect the charging case to power source with the
included Type-C charging cable for charging.
• Red light on the case steady lit = charging
Red light on the case off = fully charged
Input: 5V 200mA (earbuds)
5V 1A (charging case)
Warning:
• The rechargeable batteries that provide power for this
product must be disposed properly for recycling. Do not
dispose of batteries in fire to prevent an explosion.
• The power source used must be approved by relative
departments and in accordance wit
h electronic
specifications of devices as well as local regulatory
requirements (e.g. UL, CSA, VDE, CCC), otherwise there
may be dangers of fire, explosion, etc.

2. Power on/off
3. Bluetooth connection
The earbuds will power on when taken out
of the case.
The earbuds will power off when placed
in the case.
The blue light is steady lit for 1 second.
• For initial use, the earbuds will auto-enter
Bluetooth pairing mode when taken out of
the charging case;
• Bluetooth pairing mode: red and blue lights
flash rapidly
• Connect to other mobile phone: Please take
out the earbuds, and press and hold the
touch button of the left or right earbud for
around 2-
3 seconds to enter Bluetooth
pairing mode.

4. TWS connection of the left and right earbuds
The left and right earbuds have finished TWS pairing before
leaving factory. If the wireless connection fails to resume, please
follow the steps below to re-pair:
• When the earbuds are in the charging case, respectively and
quickly triple click the touch buttons of the left and right
earbuds until the blue lights flash rapidly, then the earbuds
enter the TWS pairing mode of the left and right earbuds;
• After pairing is done, the red lights on the left and right
earbuds will be steady lit.
5. Clear pairing records
When the left and right earbuds are
interconnected and not
connected to any Bluetooth devices, please take out the earbuds,
and quickly triple click the touch button of the left or right earbud
until the blue light flashes rapidly, then the pairing records of both
earbuds will be cleared.
Set mobile phone to search for and connect to "EDIFIER X3s", after
pairing is successful, the blue light will flash slowly.

6. Functional operation
Music playback mode (Bluetooth already connected and you are not in a conversation)
Call mode (Bluetooth already connected, and there is an incoming call or you are in a conversation)
Left earbud
Play/pause: single click
Previous track: double click
Volume down: press and hold
Game mode switch: triple click
Right earbud
Play/pause: single click
Next track: double click
Volume up: press and hold
Voice assistant: triple click
Left/right earbud
Accept a call: single click
End/decline a call: press and hold for 2-3 seconds

FAQs
When charging the charging case, the indicator is off.
• Please ensure the charging case is correctly connected with power source.
No sound
• Check if the earbuds are operating.
• Check if the earbuds volume are at an appropriate level.
• Check if the earbuds are correctly connected with mobile phone.
• Check if the earbuds are operating within a normal working range.
The call quality of the earbuds are not good.
• Check if mobile phone is in an area with strong signal.
• Please ensure the earbuds are within effective distance (10m) and no obstacle between the earbuds and
mobile phone.
When playing music, cannot control pause/play/previous track/next track via the earbuds.
• Please ensure the paired device support AVRCP (Audio/Video Remote Control Profile) profile.

Maintenance
• If it is not used for long periods of time, please charge the product with lithium battery every three months.
• Keep the product away from humid places to avoid affecting internal circuit. Do not use the product during
intense exercise or with much sweat to prevent sweat from dropping into the product to make damage.
• Do not put the product in places exposed to sun or with high temperature. High temperature will shorten
service life of electronic components, damage battery and make plastic components deformed.
• Do not put the product in cold places to avoid damaging internal circuit board.
• Do not dismantle the product. Non-professional personnel may damage the product.
• Do not drop, strongly vibrate, strike the product with hard object to avoid damaging internal circuit.
• Do not use drastic chemicals or cleaner to clean the product.
• Do not use sharp objects to scratch product surface to avoid damaging shell and affecting facade.
FCC statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IC statement: CAN ICES-3(B)/NMB-3(B).
FCC ID: Z9G-EDF150
IC: 10004A-EDF150
Declaration for EU
Frequency Band: 2.402GHz ~ 2.480GHz
RF Power Output: ≤20 dBm (EIRP)
There is no restriction of use.

Model: EDF200060
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
2021 Edifier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be
subject to change from time to time without prior notice.
Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on
this manual may be slightly different from actual product. If any difference is found, the actual
product prevails.