Edimax BT-8500 User manual

BT-8500
Quick Installation Guide
03-2021 / v1.1

Contents
I. Product Information& Safety Information ................1
I-1. Package Contents ............................................................................. 2
I-2. System Requirement ......................................................................... 2
I-3. Hardware Interface........................................................................... 2
II. Hardware Installation .............................................3
III. Driver Installation ..................................................4
IV. Adding Devices ......................................................6
V. Uninstall A Driver....................................................9

1
I. Product Information& Safety Information
The Edimax BT-8500 dual mode (BR/EDR + LE) real Bluetooth 5.0 is a Nano
USB adapter that supports data rate maximum 3 Mbps.
The BT-8500 is a portable ultra-small design USB adapter with USB 2.0, you
can plug into any USB port and enjoy incredible high-speed Bluetooth 5.0.
Please install the unit with the safety restrictions outlined below:
-Do not place the USB adapter in or near hot/humid places, such as a
kitchen or bathroom.
-There are no user-serviceable parts inside the USB adapter. If you
experience problems with the USB adapter, please contact your dealer and
ask for help.
-The USB adapter is an electrical device, if it becomes wet for any reason,
stop using it immediately.
You can find all supporting documents from the link below or via QR Code:
https://www.edimax.com/download
(Once you’ve visited the Edimax official website, please enter model no.
“BT-8500”into the search box to search for your product.)

2
I-1. Package Contents
I-2. System Requirement
-Windows 8.1/10 32bit/64bit or above
-Linux: kernel 2.6.32~4.15, suggest 4.4 (after)
-1 x USB 2.0 Type A
I-3. Hardware Interface
No.
Description
1
Case
2
USB 2.0 Type A
Quick Installation Guide
BT8500 USB Adapter
2
1

3
II.Hardware Installation
Please follow the steps below to install your Bluetooth USB adapter,
1. Turn on your PC.
If your PC or laptop has Bluetooth capability, please disable Bluetooth
before using the Bluetooth USB adapter.
2. Insert the USB adapter into an available USB port of your computer.
Never use force to insert the USB adapter.

4
III.Driver Installation
Please follow the steps below to install the driver,
1. Go to Edimax website (https://www.edimax.com/edimax/global/).
2. Enter model no. “BT-8500”into the search box to search for your product,
and Go to Download, and download the driver.
3. Open the folder and double click to install the driver.

5
4. Click “Next”to continue and follow the instructions on-screen until
installation is complete.

6
5. Select restart your computer now or later and click “Finish”.
IV.Adding Devices
Please follow the steps below to add the Bluetooth devices,
1. Go to Windows Bluetooth settings by using the search bar, or by right
clicking the Bluetooth icon in the task bar and choosing Add a Bluetooth
Device.

7
2. Select your Bluetooth device and click Pair and then confirm the passcode.

8
3. Your device is now ready to use when it shows “Connected”.