Edimax IC-7010PT User manual

1

2
ErPAnnouncement
Product: Internet Camera (IP Camera)
Purpose: 24 hour surveillance and transfer of footage for safety and health
reasons as intented use.
Detailed description:
- Health purposes: Users can pass through the Internet (from anywhere) to
control the product (IP Camera). It's intended to watch and listen to people
who need to be cared for at home and automatically sends e-mails and
phone alerts to warn observers and ask for their attention. The product
also provides a record function to retain all images and voice information
for the sake of reference.
- Safety purposes: Users can initiate a “motion detect” function to record
and send e-mails to notify them when doors or windows are opened –
potentially by unwarranted persons.
- General purposes: Record/monitor environment footage and sound and
store them onto a hard disk as a record.
As we cannot predict when events of this nature may occur, we need for the
product to remain active and alert at all times. If the product had to go into
“standby/off” mode, it would impact the effectiveness of recording and warning
functions resulting in users not getting the information they need.
Based on the ErP official journal of European Union
Directives 2009/125/CE of the European parliament and of the council of
21 October 2009 Article 15 sector 5 part (a) and (b) as below:
“Implementing measures shall have no significant negative impact on the
functionality of the product, from the perspective of the user.”
“Health, safety and environment shall not be adversely affected.”
We announce that the product need not comply with the (EC) No 1275
Standby and on/off mode function of Implementing Measurement.
We will keep up to the newest Implementing Measurements in the future
and make the necessary changes if it's related to this product.

3
Copyrightby Edimax Technology Co, LTD. all rights reserved. No part of
this publication may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language or computer language, in any
form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of this company.
This company makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties, merchantability or fitness for any particular purpose. Any software
described in this manual is sold or licensed "as is". Should the programs prove
defective following their purchase, the buyer (and not this company, its
distributor, or its dealer) assumes the entire cost of all necessary servicing,
repair, and any incidental or consequential damages resulting from any defect
in the software. Further, this company reserves the right to revise this
publication and to make changes from time to time in the contents hereof
without obligation to notify any person of such revision or changes.
The product you have purchased and the setup screen may appear slightly
different from those shown in this QIG. For more detailed information about this
product, please refer to the User Manual on the CD-ROM. The software and
specifications are subject to change without notice. Please visit our web site
www.edimax.com for the update. All rights reserved including all brand and
product names mentioned in this manual are trademarks and/or registered
trademarks of their respective holders.
Notice according to GNU/GPL-Version 2
This product includes software that is subject to the GNU/GPL-Version 2.
You find the text of the license on the product cd/dvd. The program is free
software and distributed without any warranty of the author. We offer, valid
for at least three years, to give you, for a charge no more than the costs of
physically performing source distribution, a complete machine-readable
copy of the corresponding source code.
Please contact Edimax at: Edimax Technology co., Ltd, NO. 3, Wu-Chuan
3rd RD Wu-Ku-Industrial Park, Taipei Hsien, Taiwan. R.O.C., TEL :
[phone], FAX : [phone], [e-mail]

4
Table of Contents
Chapter I: Familiar with your Internet IP Camera.............................................6
1.1 Package Contents ..............................................................................6
1.2 Basic Introduction...............................................................................7
1.3 Product Highlights...............................................................................8
1.4 Familiar with Key Components...........................................................9
IC-7010PT:..............................................................................................11
IC-7010PTn:...........................................................................................12
IC-7010PoE:...........................................................................................13
1.5 Camera Installation...........................................................................17
1.6 Locate the IPAddress of this IP Camera ..........................................20
1.7 Using Camera Admin Software to Locate Camera ...........................24
Chapter II: Using Web Management Interface...............................................36
2.1 Camera Settings...............................................................................36
2.2 Video.................................................................................................40
2.2.1 MJPEG...................................................................................41
2.2.2 MPEG4...................................................................................42
2.2.3 H.264......................................................................................43
2.2.4 OSD...............................................................................................44
2.2.5 Night Vision....................................................................................45
2.3 Pan and Tilt.......................................................................................46
2.3.1 Preset Points..........................................................................46
2.3.2 Guard Tour..............................................................................48
2.4 Network Settings...............................................................................51
2.4.1 LAN.........................................................................................52
2.4.2 WLAN.....................................................................................55
2.4.3 Dynamic DNS.........................................................................58
2.4.4 UPnP......................................................................................59
2.4.5 LoginFree ...............................................................................61
2.4.6 RTSP......................................................................................62
2.5 Motion Detection...............................................................................63
2.5.1 Motion Detection.....................................................................64
2.5.2 Motion Region ........................................................................66
2.6 System Info.......................................................................................73
2.6.1 Camera Information................................................................74
2.6.2 Date / Time Setting.................................................................75

5
2.6.3 Schedule........................................................................................77
2.6.4 Utilities....................................................................................79
2.6.5 Status......................................................................................81
2.6.6 System Log....................................................................................82
2.7 Account.............................................................................................83
2.7.1 Status......................................................................................86
2.7.2 Space Alarm ...........................................................................87
2.7.3 File Management....................................................................89
Chapter III: Using Surveillance Software........................................................90
3-1 Installing IP Camera Surveillance Software......................................90
3-2 Using IP camera surveillance software.............................................94
3-3 Configure IP camera surveillance software ......................................97
3-3-1 Configure cameras.................................................................97
3-3-2 General Settings ..................................................................106
3-4 Change Display Layout ..................................................................112
3-5 Full-screen mode............................................................................115
3-6 Scan...............................................................................................116
3-7 Zoom-in / Zoom-out........................................................................117
3-8 PTZ.................................................................................................118
3-9 Snapshot........................................................................................119
3-10 Recording.....................................................................................120
3-11 Video Playback.............................................................................121
Chapter IV: How to View IP Camera over the Internet with iPhone..............122
Chapter V: Appendix....................................................................................129
5.1 Specification....................................................................................129
5.2 How to apply for a free DNS account in the http://www.dyndns.org130
5.3 Troubleshooting..............................................................................133

6
Chapter I: Familiar with your Internet IP Camera
1.1 Package Contents
Thank you for purchasing this IP camera! Before you start to use this IP
camera, please check the package contents. If anything is missing, please
contact the dealer of purchase and return the package to claim for missing
contents.
Item Name
Quantity
1
IP Camera
1
2
Antenna(IC-7010PTn only)
2
3
Power Adapter
1
4
Ethernet Cable
1
5
CD ROM (Including Manual/Utility/Multi-Language
QIG)
1
6
Accessory kit
1
7
Quick Installation Guide
1
8
Mounting Kit
1

7
1.2 Basic Introduction
Thank you for purchasing this IP camera! This IP camera is an ideal product
for all kinds of video surveillance purposes, like home/office safety, kid/pet
monitoring, and remote video acquire etc. Edimax IC-7010 series is tailor
made to stream live video over your network. You can view the IP camera's
video from anywhere on your local computers or via the Internet. Besides,
Edimax IC-7010 series features high quality and high frame rate video
streaming through advanced video compression. In order to achieve the
highest video quality, simply select H.264, MPEG4 or M-JPEG depending on
your network settings.
Some people may concern that there will be some places which will not be
covered by camera, but this problem is completely solved by this IP camera.
With built-in pan-tilt function, you can point the camera to the position where
you wish to look at with user interface. You can even define a preset path, and
the camera will cruise along the path you defined.
If the environment is too dark, it‟s also not a problem. This camera equips 9
IR-LEDs and will illuminate automatically when the environment is too dark,
and the image captured by this camera will still be clear.
You can discover more useful functions in next section!

8
1.3 Product Highlights
No pre-loaded software required - all you need is a browser like Internet
Explorer 6 (and above, with plugin installed).
With supplied video surveillance software, you can connect up to 16 video
cameras and view images captured by every camera at the same time.
Supports 3 video resolutions: MJPG and H.264 SXGA(1280 x 1024), VGA
(640 x 480), and QVGA(320 x 240); MPEG4 XGA(1024 x 768), VGA (640
x 480), and QVGA (320 x 240).
Anti-flicker function (eliminates flash caused by fluorescent lights, 50 /
60Hz selectable).
Video control functions, like brightness and zoom-in / zoom-out.
Audio function, suitable for applications like video conference or
environment monitor.
Pan-tilt control.
9 automatically-controlled IR LEDs.
Wired and wireless network (IC-7010PTn only, 802.11b / 802.11g /
802.11n) support
Wireless data encryption (WEP / WPA)
Supports DHCP and PPPoE protocol, you can also assign a fixed IP
address to the camera also.
Supports Dynamic DNS (used to allocate the IP camera‟s Internet address,
when the ISP you‟re using does not assign you with a fixed Internet
address).
Supports UPnP, Windows XP (and above) will discover this IP camera in
network neighbor automatically.
Send captured picture and video by Email or FTP when motion is
detected.
Configurable motion detection sensitivity (6 levels from most sensitive to
least sensitive).
Built-in real-time clock, date and time information will be recorded with
every captured picture / video clip (also supports auto time
synchronization via network time protocol).
Upgradeable firmware - enjoy new functions without buying a new
camera!
Supports up to 16 users, and you can set different password to different
user.
Usage and event logging.

9
1.4 Familiar with Key Components
Item
Description
Power
When the camera is powered on and ready for access, this LED
will light up.
Audio
Indicates Audio status
LAN
When the IP Camera is linked to a wired network, this LED will
light up. The LED will flash while video is transmitted or
received through a wired network.
ACT
(IC-7010
The LED will flash while data is transmitted.
Front View
Focus Ring
IR LED
Microphone
Wired & Wireless:
POE model:
Power LED Audio LED LAN LED WLAN LED
Power LED Audio LED ACT LED LAN LED

10
PoE
only)
Wireless
(IC-7010
PT &
IC-7010
PTn
only)
When the IP Camera is linked to a wireless network, this LED
will light up. The LED will flash while video is transmitted or
received through a wireless network.
Focus
Ring
You can change the aim and focus of the camera by adjusting
the camera head's aim and adjusting the focus ring. Simply
point it in your direction of choice and rotate the focus ring to
your preference.
IR LEDs
Lights up when environment is too dark
Microph
one
Collects audio

11
IC-7010PT:
USB Port
Power
Connector
SD Card Slot
Ethernet Port
Audio Connector
Back View

12
IC-7010PTn:
Antenna Base
Power Connector
WPS Button
SD Card Slot
Audio Connector
Ethernet Port

13
IC-7010PoE:
Item
Description
Power
Connector
Connects to 12V DC power adapter
SD Card Slot
Accepts SD / SD-HC memory card for image / video
storage
USB Port*
(IC-7010PT
only)
Accepts USB WiFi adapter** to enable wireless
Audio
Connector
Connects to external speaker for audio output
Ethernet
Connector
Connect to your local area network
Antenna
Base
(IC-7010PTn
Connects to supplied antenna
Power
Connector
SD Card Slot
Audio Connector
Ethernet Port

14
only)
WPS Button
(IC-7010PTn
only)
Press the WPS button (click) on the IP Cam and click on
theAccess Point that you want to wirelessly connect it to.
Note: The USB port only works with Edimax USB WiFi adapters.
Note: Edimax EW-7711HPn, EW-7711UAn, EW-7711USN,
EW-7711UMn & EW-7711UTn

15
Item
Description
Reset
Button
Press the button with pen nib and hold for 5 seconds to reset the
camera settings to factory default value.
Side View
Reset Button

16
Item
Description
Tripod
Connect
or
Connects to tripod to secure the camera when the camera is not
put on a horizontal surface.
Bottom View
Tripod Connector

17
1.5 Camera Installation
Please follow the following instructions to set your IP camera up.
1. Unpack the product package and check if anything‟s missing.
2. Connect the Ethernet cable to your local area network, and connect the
other end to the LAN jack of this IP camera.

18
3. Plug the power adapter to wall socket, and connect the power connector to
the power jack located at the bottom of the IP camera.
4. Connect two antennas to the antenna bases, which is located at the back of
this IP camera.

19
5. Place the camera at a secure place, and point the camera to the place you
wish to monitor. If you wish to hang the camera on the ceiling or wall,
please use the tripod connector (located at the bottom of the camera) to
secure the camera.
6. Launch Internet Explorer on your computer, and following the instructions
given in next section to set the IP camera.

20
1.6 Locate the IPAddress of this IP Camera
Default IP address of this IP camera is 192.168.2.3. If you wish to assign
another IP address to this IP camera, you have to log onto the web
configuration interface of the camera first.
If the left three fields of the IP address of your computer is not 192.168.2, you‟ll
have to change the IP address of your computer first:
1. Click „Start‟-> „Control Panel‟