Edimax IC-3010 User manual

IC-3010 / IC-3010Wg
Wire/ Wireless 11b/g IP Camera
User Manual
Version 1.0 April 2008

1
C A T A L O G
Chapter I: Familiar with your Internet IP Camera...............................................................3
1.1 Package Contents....................................................................................................3
1.2 Basic Introduction.....................................................................................................4
1.3 Product features........................................................................................................5
1.4 Familiar with Key Components...............................................................................6
1.5 Descriptions for LED Indicators..............................................................................9
1.6 Camera Installation ................................................................................................10
1.7 Locate the IPAddress of this IP Camera............................................................11
1.8 Log Onto Web Management Interface................................................................15
Chapter II: Using Web Management Interface.................................................................18
2.1 Camera Settings.....................................................................................................18
2.2.1 Motion Detection..........................................................................................20
2.2.2 Mute Audio....................................................................................................23
2.2.3 About.............................................................................................................24
2.2 LAN Settings............................................................................................................25
2.2.1 IPAddress....................................................................................................25
2.2.3 Dynamic DNS ..............................................................................................28
2.2.4 UPnP.............................................................................................................29
2.2.5 LoginFree......................................................................................................31
2.4.1 Dual Mode....................................................................................................38
2.4.2 MPEG4..........................................................................................................39
2.4.3 MJPEG..........................................................................................................40
2.4.4 Audio..............................................................................................................41
2.5 Email & FTP ............................................................................................................42
2.5.1 Email Settings..............................................................................................42
2.5.2 FTP Settings.................................................................................................44
2.6 Motion Detection.....................................................................................................46
2.7 System......................................................................................................................48
2.7.1 Camera Information....................................................................................49
2.7.2 Date / Time Setting......................................................................................50
2.7.3 Utilities...........................................................................................................51
2.8 Status........................................................................................................................53
2.9 Users ........................................................................................................................54
Chapter III: Windows-Based Utility.....................................................................................57

2
3.1 Install Windows-based Utility................................................................................57
3.2 Locate Camera on Local Network and Network Setting ..................................61
3.3.1 Network Settings.........................................................................................65
3.3.2 Wireless Settings.........................................................................................67
3.3.3 E-Mail Settings.............................................................................................71
3.3.4 PPPoE Settings...........................................................................................73
3.3.5 FTP Settings.................................................................................................75
3.3.6 Date / Time Settings....................................................................................77
3.3.7 Advanced Settings ......................................................................................79
3.3.8 Users.............................................................................................................81
3.3.9 Tools..............................................................................................................83
3.3.11 About ...........................................................................................................85
3.4 Camera Viewer.......................................................................................................86
3.4.1 Connecting to IP Camera...........................................................................89
3.4.2 Select the Camera to View and Control ..................................................92
3.5 Advanced Camera Setting ....................................................................................95
3.5.1 Setting...........................................................................................................96
3.5.2 A/V setting ....................................................................................................97
3.5.3 Recording (scheduling) ..............................................................................98
3.5.4 Status ..........................................................................................................102
3.5.5 General.......................................................................................................104
3.5.6 About...........................................................................................................106
3.6 Play Recorded Video...........................................................................................107
Chapter IV: Appendix..........................................................................................................109
4.1 Specification ..........................................................................................................109
4.2 Troubleshooting....................................................................................................110
4.3 R&TTE Compliance Statement..........................................................................113

3
Chapter I: Familiar with your Internet IP Camera
1.1 Package Contents
Thank you for purchasing this IP camera! Before you start to use this IP camera,
please check the package contents. If anything is missing, please contact the dealer
of purchase and return the package to claim for missing contents.
One Internet Camera
One Power Adapter
One Camera Stand
One 100M Category 5 Ethernet Cable
One Quick Installation Guide
One CD Rom ((Including Manual/Utility/multi-languages QIG)
One Antenna (IC-3010Wg only)

4
1.2 Basic Introduction
Thank you for purchasing this Internet IP camera! This IP camera is an ideal product
for all kinds of video-surveillance purposes, like home/office safety, kid/pet monitoring,
and remote video acquire etc. Unlink conventional close-circuit vide camera, you’re
not limited to the length of cable! Once this IP camera is connected to Internet, you
can receive video from anywhere in the world where Internet access is available.
If you have problem installing a new cable from the place the camera is installed to
your monitoring computer, don’t worry! This IP camera also supports wireless network,
that is, you can link to this camera wirelessly! You only have to provide this IP camera
with 12V power by the power adapter that comes with the product package, and you
don’t have to set a new network cable between the IP camera and monitoring
computer.
Worry about the content will be intercepted by unauthorized person when the video is
transmitted over the air? That’s also not a problem! Unlink conventional analog
wireless camera, which video will be intercepted by anyone who got a compatible
video receiver, this IP camera supports data encryption (WEP & WPA / WPA2 /
WPANone), which will provide ultimate data security level. All video transmitted over
the air is encrypted; therefore no one will be able to get the video captured by the IP
camera, expect yourself.
You can discover more useful functions in next section!

5
1.3 Product features
Complies IEEE 802.3/802.3u standards
Complies IEEE802.11b/g standards ( for IC-3010Wg only)
Supports dual video compression formats (MJPEG and MPEG4).
Supports VGA(640 x 480), QVGA (320 x 240), and QQVGA (160 x
120) video resolution.
Supports 2-way audio transmission, with speaker output and built-in
microphone.
Supports motion detection and snapshots the triggered event to email
and FTP
Support Wireless data encryption (WEP/ WPA-PSk/ WPA2-PSK)
Supports DHCP and PPPoE protocol, user also can assign a fixed IP
address to the camera.
Supports Dynamic DNS (used to allocate the IP camera’s Internet
address, when the ISP you’re using does not assign you with a fixed
Internet address).
Supports UPnP in OS Windows XP (or above)
Supports up to 4 users accounts.
Supports event logging
Supports firmware Upgrade
Provides easy-to-use Viewer and Recorder Utility

6
1.4 Familiar with Key Components
LAN LED: Indicates LAN activity
WLAN LED: Indicates Wireless LAN activity
Power LED: Indicates power status
Camera: Video camera with lens
Focus Ring: Adjusts focus
Descriptions for LAN / WLAN / Power LED will be giver later.
Front View
LAN LED
WLAN LED
Power LED
Camera
Focus Ring

7
Antenna Base: Connect to antenna
Reset Button: Press and hold for 5 seconds to reset the camera settings to factory
default value.
Power Jack: Connect to power adapter for power supply.
LAN Jack: Connect to your local area network by network cable.
Speaker Out: Connect to external speaker
Microphone: Built-in microphone for voice pick-up
Top View
Antenna Base
Bottom View
Reset Button
Power Jack
LAN Jack
Speaker Out
Microphone

8
Tripod Connector: Connects to any standard tripod / camera wall holder.
MAC Address Label: Shows the MAC address of this IP camera. Useful when you
can’t locate the camera on the network.
Back View
Tripod
Connector
MAC Address
Label

9
1.5 Descriptions for LED Indicators
LED Name Status Description
Off Network cable is disconnected
On Network cable is connected
LAN
Flash Transferring data via LAN port
Off No wireless LAN activityWLAN On Transferring data via wireless LAN
Off Camera is not powered (camera off)Power On Camera is correctly powered (camera on)

10
1.6 Camera Installation
Please follow the following instructions to set your IP camera up.
1. Unpack the product package and check if anything’s missing.
2. Connect the antenna to the antenna base, which is located at the top of this IP
camera.
3. Plug the power adapter to wall socket, and connect the power connector to the
power jack located at the bottom of the IP camera.
4. Connect the Ethernet cable to your local area network, and connect the other end
to the LAN jack of this IP camera.
NOTE: You can skip this step if you plan to use wireless LAN only.
5. Connect your tripod / camera holder, and point the camera to the place you wish
to monitor.
6. Connect the external speaker’s audio cable to ‘Speaker’ jack located at the bottom
of this IP camera.
If you don’t need audio support, you can skip this step.

11
1.7 Locate the IPAddress of this IP Camera
Default IP address of this IP camera is 192.168.2.3. If you wish to assign another IP
address to this IP camera, you have to log onto the web configuration interface of the
camera first.
If the left three fields of the IP address of your computer is not 192.168.2, you’ll have
to change the IP address of your computer first:
1. Click ‘Start’ -> ‘Control Panel’

12
2. Double-click ‘Network Connections’ icon.
3. Right-click ‘Local Area Connection’, and click ‘Properties’.

13
4. Select ‘Internet Protocol (TCP/IP)’, then click ‘Properties’.

14
5. In ‘IP address’ field, please fill in any IP address begins with ‘192.168.2’, and ends
with a value greater than 2 and less than 254 (You can use the example in the
picture ‘192.168.2.239’). In Subnet mask field, please fill ‘255.255.255.0’. Please
keep all other fields empty, and click ‘OK’.
If you changed the IP address of this IP camera and you forget it, there’re 2 methods
to recover it:
a. Press and hold the ‘Reset’ button located at the bottom of this IP camera, to
clear all settings of the IP camera and reset the IP address back to
192.168.2.3. You’ll lose all settings in the IP camera.
b. Ask network administrator to check the DHCP release table, if the camera
was set to obtain the IP address by DHCP, a new record will be added to
DHCP release table on DHCP server when the IP camera is connected to the
local area network.

15
1.8 Log Onto Web Management Interface
Make sure the IP camera is correctly powered (Power LED is on), and then launch
Internet Explorer and type the IP address of the IP camera in address bar of Internet
Explorer. You should be prompted to input the user name and password:
Default user name is ‘admin’ (in lower case) and password is ‘1234’. Click ‘OK’ to
continue after user name and password has entered.
If you’re rejected, maybe the password has been modified previously. This should not
happen if this is a newly-purchased camera, however, if you get the camera from
someone else, the password would be changed. Please try to obtain the correct user
name / password, or you’ll have to reset the camera.

16
After logged on, you should see the following messages at the top of Internet Explorer:
This IP camera requires a specialActiveX control (A.K.A. ‘Plugin’) to work. Please
click on the message, and select ‘InstallActiveX Control…’:
When you’re prompted, click ‘Install’ to continue.

17
You should be able to see the image from camera now:
Note: If you see one of these messages (or both):
Your computer may not have the display capability that this IP camera requires, or
you don’t have Microsoft DirectX® installed. Please download Microsoft DirectX®
from Microsoft’s website (http://www.microsoft.com), and try again.
In some cases, your computer is able to display the image from IP camera correctly,
but you’ll still see these messages. If this happens, just ignore them.
OR

18
Chapter II: Using Web Management Interface
2.1 Camera Settings
The first menu after you logged onto web management interface is ‘Camera’, and this
is the only menu you can see the real-time image from camera.
You can always back to this menu by clicking ‘Camera’ on the top of web
management interface.

19
The descriptions of every setting in this menu will be given below:
Item Description
Video Format Specifies video encoding format. You can choose
MPEG4 or MJPEG (Motion-JPEG).
MPEG4 mode also supports motion detection (see
chapter 2.2.1).
Speak to IPCam If your computer is equipped with a microphone, you can
press and hold this button and speak to the microphone.
Your voice will be transmitted to the external speaker
connected to the IP camera. This makes the IP camera
become a network telephone, and you can talk to the
people there.
Please note that your voice will only be transmitted
during the time you press and hold the ‘Speak to IPCam’
button. When you release the button, your voice will not
be transmitted to IP camera.
(If ‘Speak to IPCam’ button is grayed out, you have to
activate audio function of this IP camera before you can
use this function - see chapter 2.4 for detailed
instruction).
Snapshot Take a snapshot picture and save the picture to your
computer’s hard drive.
Record Start video recording and save recorded video clip to
your computer’s hard drive.