Edimax ES-5224RS+ User manual

Key Features
QoS with Four Priority Queues
The QoS (Quality Of Service) feature provides four internal queues to support four different classifications of
traffic. High priority packet streams experience less delay inside the switch, which supports lower latency for
certain delay-sensitive traffic. it can classify the packet as one of the four priorities according to 802.1p
priority tag, DiffServ and/or IP TOS. The QoS operate at full wire speed. The actual scheduling at each
egress port can be based upon a strict priority, weighted round robin or a mix of both.
Port Mirroring
This mechanism helps track network errors or abnormal packet transmission without interrupting the flow of
data. Allow ingress traffic to be monitored by a single port that is defined as mirror capture port. The mirror
capture port can be any 10/100 port, 10/100/1000 port. Mirroring multiple ports is possible but can create
congestion at the mirror capture port.
VLAN for Performance & Security
The VLAN feature in the switch offers the benefits of both security and performance. VLAN is used to isolate
traffic between different users and thus provides better security. Limiting the broadcast traffic to within the
same VLAN broadcast domain also enhances performance.
Isolated Group, Provide Secure for Certain Ports
The isolated group feature allows certain ports to be designated as protected. All other ports are non-isolated.
Traffic between isolated group members are blocked. Traffic can only be sent from isolated group to non-
isolated group.
Mac-based Trunking with Automatic Link Fail-over
Dynamic fail-over means packets will not get assigned to any trunk member port that has failed. If one of the
ports were to fail, traffic will automatically get distributed to the remaining active ports.
Trap Event for Exception Management
We use SNMP Trap mechanism to inform supervisor to know the instant abnormal status of the switch.
2 Dual Media for Flexible Fiber Connection
25, 26 dual media port are provided for flexible fiber connection. You can select to install optional transceiver
modules in these slots for short, medium or long distance fiber backbone attachment. Use of the SFP/GBIC
will disable their corresponding built-in 10/100/1000Base-T connections.
Build-in Web-base Management
Instead of using CLI interface, we provide a more convenient GUI for user. We just need to configure switch
via Web Browser. It is more quickly for user to familiar the method to control switch on the basis of this
design.
24 + 2 Ports Web Smart
24 + 2 Ports Web Smart Switch Switch
Integrated 2 x SFP Module Ports
Integrated 2 x SFP Module Ports
Fast Ethernet Web Smart Switch
Fast Ethernet Web Smart Switch
ES-5224RS+

Model NO. ES-5224RS+
Voltage 100~240 V
Frequency 50~60 Hz
Consumption 30W
Ambient Temperature 0°to 50°C
Humidity 5% to 90%
Dimensions 44(H) x 442(W) x 209(D) mm
Safety FCC Part 15 Class A & CE Mark Approval
Taiwan / Headquarters
Edimax Technology Co., LTD.
TEL:[phone]
FAX:[phone]
[e-mail]
Europe
Edimax Technology Europe B.V.
TEL:[phone]
FAX:[phone]
[e-mail]
U.K.
Edimax Technology (UK) Ltd.
TEL:[phone]
FAX:[phone]
[e-mail]
Poland
Edimax Technology Poland
B.V. SP. Z O.O.
Tel: [phone]
Fax: [phone]
[e-mail]
U.S.A.
Edimax Computer Company
TEL:[phone]
FAX:[phone]
[e-mail]
Latin America
TEL:[phone]
FAX:[phone]
sales_latinameri[email protected]
China
TEL:[phone]
FAX:[phone]
Standard compliance
IEEE 802.3 10Base-T / IEEE 802.3u 100Base-T / IEEE 802.3ab 1000Base-T / IEEE
802.3z 1000Base-X Ethernet, IEEE 802.3x flow control / IEEE 802.3 auto-negotiation /
IEEE 802.1q VLAN
Subscriber Interface
1-24 10/100Mbps Fast Ethernet ports. / 25,26 are Gigabit TP/ SFP Fiber auto sense
Auto-Negotiation and Auto-MDIX
Backpressure flow control for half duplex / 802.3x flow control for full duplex.
Connector: 24 RJ-45 and 25,26 dual media (RJ-45/SFP)
Switching capacity:
Non-blocking switch fabric supports up to 24FE+2GbE, ports
8 K MAC addresses / 256k packet buffer and 128k control memory
VLAN
Port-base VLAN
IEEE802.1q tag-base VLAN, 4094 max
Support Metro-mode to easily configure for MAN
Qos
Port Based, 802.1p based QoS packet classification
Supports four level priority queues to prioritize in-bound and out-bound traffic
Port Trunk
2 Fast Ethernet +1 Gigabit Ethernet groups
Per-group max 4 member
Mac-based trunking with automatic link fail-over
Broadcast Storm
Multicast/Broadcast/Unknown-Unicast Storm suppression
Port Mirroring
Support 1: N RX port mirroring
Isolated Group
Provide one group allows certain ports to be designated as protected
Rate Limit
Ingress rate limit
Egress rate limit