Educational Insights CoinStruction EI-4039 User manual

Building a Biplane
Tail Assembly Rudder Assembly to Tail
Wing Assembly
STEP
1STEP 2
STEP
3
Single Plane Matrix
Using 2-way connectors
Connect the three
rudders to the left,
right, and top-back of
the tail assembly as shown.
Cube
Using 2-way and
90°connectors
Hub
Using 2-way connectors
Hub
Using 2-way connectors,
attach coin-to-connector
and connector-to-connector.
Extra Strength
By doubling connectors you can
strengthen any connection.
(This shows two 4-way connectors.)
Top View
Front View
4 1 penny
8 8 8 pennies
(75) 2-way (35) 90°
Side View
4 2 4 pennies
Coins needed to build your biplane:
(51) pennies (2) nickels
Coinstruction connectors needed to build your biplane:
2X
6 3 pennies
3X
430 pennies44
2X
1a
1b
1b
1c
Basic and Starter Shapes
Use these illustrations to build basic and “starter” shapes. Once
you know how to build these basic shapes, you will be able to
build anything your imagination allows! Remember, not all kits
have every kind of connector. Check the description to the right
to see which connectors are included in this kit.
1a
1a
1b
1b 1b
1c
1c

Connect Tail Assembly to Wing Assembly
Connect Propeller Assembly to Wing Assembly
STEP
4STEP
5
STEP
6Wheel Assembly
STEP
7
2 2 nickels
Propeller Assembly
48 1 penny 42 4 pennies
4a
4a
4b
4b
2X
Connect these two 2-way
connectors to the pennies in
the wing assembly as shown
Connect these two pennies
to the 90°connectors on the
wing assembly as shown
Wing Assembly
Tail Assembly with Rudders
Tail and Wing Assembly
Propeller Assembly
Connect these two 2-way
connectors to the pennies in
the wing assembly as shown
Connect these
two pennies to the 90°
connectors on the wing
assembly as shown
Building a Biplane
Ages 5+EI-4039
Build more fun with these additional Coinstruction kits.
VISIT OUR WEBSITE: www.educationalinsights.com
We welcome your comments or questions about our products and service.
CALL: [phone] toll-free Monday-Friday 8:30 am to 5:00 pm CST
©2003 Educational Insights, Inc., Rancho Dominguez, CA 90220 (USA)
All rights reserved. Made in China. Conforms to: ASTM F 963.
Please retain this information.
EI-4028 Robot
Kit includes over
400 pieces EI-4026 Helicopter
Kit includes over 200 pieces
EI-4041 Skyscraper
Kit includes
over 100 pieces
EI-4030 Castle
Kit includes over
600 pieces